BS EN 12975-1:2006+A1:2010 - Thermal solar systems and components. Solar collectors. General requirements – BSI British Standards

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN 12975-1:2006+A1:2010

Thermal solar systems and components. Solar collectors. General requirements

Status : Current, Work in hand   Published : April 2006

Format
PDF

Format
HARDCOPY



BS EN 12975-1:2006+A1:2010 Thermal solar systems and components. Solar collectors. General requirements

BS EN 12975-1 is a European Standard which specifies requirements on durability (including mechanical strength), reliability and safety for liquid heating solar collectors. It also includes provisions for evaluation of conformity to these requirements.

It is not applicable to those collectors in which the thermal storage unit is an integral part of the collector to such an extent, that the collection process cannot be separated from the storage process for the purpose of making measurements of these two processes. It is basically applicable to concentrating collectors; thermal performance testing as given in BS EN 12975-2:2006, 6.3. (quasi dynamic testing) is also applicable to most concentrating collector designs, from stationary non-imaging concentrators as CPCs to high concentrating tracking designs.
 
Collectors that are custom-built (built in, roof integrated collectors that do not comprise factory made modules and are assembled directly on the place of installation) cannot be tested in their actual form for durability, reliability and thermal performance according to this standard. Instead, a module with the same structure as the ready collector is tested. The module gross area in the case of custom built collectors should be at least 2 m2. The test is valid only for larger collectors, than the tested module.

For collectors the national and European Guidelines for Structural Planning and overhead glazing are not valid.

Therefore this standard should be applied for the design of the static of the collector.

Contents of BS EN 12975-1:

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and units
5 Durability and reliability
5.1 Materials and design
5.2 Required tests
5.3 Pass criteria
5.3.1 General
5.3.2 Internal pressure for absorber
5.3.3 High temperature resistance
5.3.4 Exposure
5.3.5 External thermal shock
5.3.6 Internal thermal shock
5.3.7 Rain penetration
5.3.8 Mechanical load test
5.3.9 Thermal performance
5.3.10 Freeze resistance test
5.4 Procedure
6 Safety
7 Collector identification
7.1 Drawings and data sheet
7.2 Labelling
7.3 Installer instruction manual
Annex A (informative) Description of solar collectors materials and manufacture
A.1 General
A.2 Absorbers
A.3 Transparent covers
A.4 Insulation materials
A.5 Reflectors
A.6 Diffusion barriers
Annex B (informative) Environmental protection
B.1 Heat transfer fluid
B.2 Insulation materials
B.3 Recycling of the collector materials
Annex C (informative) Tests to be repeated in collector design modifications
Bibliography

 




Standard NumberBS EN 12975-1:2006+A1:2010
TitleThermal solar systems and components. Solar collectors. General requirements
StatusCurrent, Work in hand
Publication Date28 April 2006
Cross ReferencesEN 12975-2:2006, EN ISO 9488, ISO 9488:1999, ISO 9806-1, ISO 9806-2, ISO 9806-3, ISO 9808, ISO/TR 10217, NP P 50-511:1985, DIN V 4757-3:1995, OENORM M 7710:1995, UNI 8796:1987, ISO 9553:1997
ReplacesBS EN 12975-1:2000
International RelationshipsEN 12975-1:2006+A1:2010
Amended ByAmendment, December 2010; Corrigendum, April 2006
DescriptorsSolar collectors, Performance, Instructions for use, Approval testing, Solar heating, Heat engineering components, Mechanical testing, Equipment safety, Reliability, Watertightness tests, Space-heating systems, Heat transfer, Durability, Performance testing, Environmental testing
ICS27.160
Title in FrenchInstallations solaires thermiques et leurs composants. Capteurs solaires. Exigences générales
Title in GermanThermische Solaranlagen und ihre Bauteile. Kollektoren. Allgemeine Anforderungen
CommitteeRHE/25
ISBN978 0 580 70583 0
PublisherBSI
FormatA4
DeliveryYes
Pages18
File Size570 KB
Price£126.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Get ISO 45001

BSI Essentials: All-in-one BSI online toolkit for BS ISO 45001


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards