Metallurgy - Iron and steel products

Key standards:

BS EN 1706:2020 Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
BS EN 1676:2020 Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
BS 6744:2016 Stainless steel bars. Reinforcement of concrete. Requirements and test methods
BS EN 10027-1:2016 Designation systems for steels
BS EN 10027-2:2015 Designation systems for steels
BS EN 10028-1:2017 Flat products made of steels for pressure purposes
BS EN 10028-2:2017 Flat products made of steels for pressure purposes
BS EN 10028-6:2017 Flat products made of steels for pressure purposes
BS EN 10120:2017 Steel sheet and strip for welded gas cylinders
BS EN 10136:2019 Steels and cast irons. Determination of nickel content. Flame atomic absorption spectrometric method (FAAS)
BS EN 10222-1:2017 Steel forgings for pressure purposes
BS EN 10228-3:2016 Non-destructive testing of steel forgings
BS EN 10228-4:2016 Non-destructive testing of steel forgings
BS EN 10283:2019 Corrosion resistant steel castings
BS EN 10293:2015 Steel castings. Steel castings for general engineering uses
BS EN 10305-1:2016 Steel tubes for precision applications. Technical delivery conditions
BS EN 10305-4:2016 Steel tubes for precision applications. Technical delivery conditions
BS EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions
BS EN 12163:2016 Copper and copper alloys. Rod for general purposes
BS EN 12164:2016 Copper and copper alloys. Rod for free machining purposes
BS EN 12165:2016 Copper and copper alloys. Wrought and unwrought forging stock
BS EN 12166:2016 Copper and copper alloys. Wire for general purposes
BS EN 12167:2016 Copper and copper alloys. Profiles and bars for general purposes
BS EN 12954:2019 General principles of cathodic protection of buried or immersed onshore metallic structures
BS EN 1371-2:2015 Founding. Liquid penetrant testing
BS EN 14726:2019 Aluminium and aluminium alloys. Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
BS EN 1559-4:2015 Founding. Technical conditions of delivery
BS EN 1563:2018 Founding. Spheroidal graphite cast irons
BS EN 1982:2017 Copper and copper alloys. Ingots and castings
BS EN 485-1:2016 Aluminium and aluminium alloys. Sheet, strip and plate
BS EN 515:2017 Aluminium and aluminium alloys. Wrought products. Temper designations
BS EN 573-3:2019 Aluminium and aluminium alloys. Chemical composition and form of wrought products
BS EN 754-2:2016 Aluminium and aluminium alloys. Cold drawn rod/bar and tube
BS EN 755-1:2016 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles
BS EN 755-2:2016 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles
BS EN 755-9:2016 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles
BS EN ISO 10893-6:2019 Non-destructive testing of steel tubes
BS EN ISO 10893-7:2019 Non-destructive testing of steel tubes
BS EN ISO 11970:2016 Specification and qualification of welding procedures for production welding of steel castings
BS EN ISO 16120-1:2017 Non-alloy steel wire rod for conversion to wire
BS EN ISO 16120-2:2017 Non-alloy steel wire rod for conversion to wire
BS EN ISO 3211:2018 Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
BS EN ISO 4491-4:2019 Metallic powders. Determination of oxygen content by reduction methods
BS EN ISO 4957:2018 Tool steels
BS EN ISO 6507-2:2018 Metallic materials. Vickers hardness test
BS EN ISO 6507-3:2018 Metallic materials. Vickers hardness test
BS EN ISO 6508-1:2016 Metallic materials. Rockwell hardness test
BS EN ISO 6508-2:2015 Metallic materials. Rockwell hardness test
BS EN ISO 9227:2017 Corrosion tests in artificial atmospheres. Salt spray tests
BS EN ISO 945-1:2019 Microstructure of cast irons
BS ISO 3116:2019 Magnesium and magnesium alloys. Wrought magnesium and magnesium alloys
BS ISO 4960:2019 Steel strip, cold-reduced with a mass fraction of carbon over 0,25 %
BS ISO 4993:2015 Steel and iron castings. Radiographic testing
BS ISO 5952:2019 Steel sheet, hot-rolled, of structural quality with improved atmospheric corrosion resistance
BS 7668:2016 Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
BS EN 10028-3:2017 Flat products made of steels for pressure purposes
BS EN 10028-5:2017 Flat products made of steels for pressure purposes
BS EN 10058:2018 Hot rolled flat steel bars and steel wide flats for general purposes. Dimensions and tolerances on shape and dimensions
BS EN 10106:2015 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state
BS EN 10164:2018 Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions
BS EN 10207:2017 Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
BS EN 10222-3:2017 Steel forgings for pressure purposes
BS EN 10222-5:2017 Steel forgings for pressure purposes
BS EN 10228-1:2016 Non-destructive testing of steel forgings
BS EN 10228-2:2016 Non-destructive testing of steel forgings
BS EN 10247:2017 Micrographic examination of the non-metallic inclusion content of steels using standard pictures
BS EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion
BS EN 10263-2:2017 Steel rod, bars and wire for cold heading and cold extrusion
BS EN 10263-3:2017 Steel rod, bars and wire for cold heading and cold extrusion
BS EN 10263-4:2017 Steel rod, bars and wire for cold heading and cold extrusion
BS EN 10263-5:2017 Steel rod, bars and wire for cold heading and cold extrusion
BS EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
BS EN 10303:2015 Thin magnetic steel strip and sheet for use at medium frequencies
BS EN 10305-2:2016 Steel tubes for precision applications. Technical delivery conditions
BS EN 10305-3:2016 Steel tubes for precision applications. Technical delivery conditions
BS EN 10305-5:2016 Steel tubes for precision applications. Technical delivery
BS EN 12168:2016 Copper and copper alloys. Hollow rod for free machining purposes
BS EN 12735-2:2016 Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration
BS EN 1396:2015 Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications
BS EN 1412:2016 Copper and copper alloys. European numbering system
BS EN 15079:2015 Copper and copper alloys. Analysis by spark optical emission spectrometry (S-OES)
BS EN 754-1:2016 Aluminium and aluminium alloys. Cold drawn rod/bar and tube
BS EN 754-7:2016 Aluminium and aluminium alloys. Cold drawn rod/bar and tube
BS EN 754-8:2016 Aluminium and aluminium alloys. Cold drawn rod/bar and tube
BS EN 755-7:2016 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles
BS EN 755-8:2016 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles
BS EN ISO 148-1:2016 Metallic materials. Charpy pendulum impact test
BS EN ISO 148-2:2016 Metallic materials. Charpy pendulum impact test
BS EN ISO 148-3:2016 Metallic materials. Charpy pendulum impact test
BS EN ISO 16120-4:2017 Non-alloy steel wire rod for conversion to wire
BS EN ISO 16701:2015 Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
BS EN ISO 204:2018 Metallic materials. Uniaxial creep testing in tension. Method of test
BS EN ISO 2085:2018 Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
BS EN ISO 3923-1:2018 Metallic powders. Determination of apparent density
BS EN ISO 4545-1:2018 Metallic materials. Knoop hardness test
BS EN ISO 6507-4:2018 Metallic materials. Vickers hardness test
BS EN ISO 6508-3:2015 Metallic materials. Rockwell hardness test
BS EN ISO 7438:2016 Metallic materials. Bend test
BS EN 10205:2016 Cold reduced tinmill products. Blackplate
BS EN 10251:2015 Magnetic materials. Methods of determination of the geometrical characteristics of electrical steel sheet and strip
BS EN 10305-6:2016 Steel tubes for precision applications. Technical delivery conditions
BS EN 12861:2018 Copper and copper alloys. Scrap
BS EN 1559-5:2017 Founding. Technical conditions of delivery
BS EN 1754:2015 Magnesium and magnesium alloys. Designation system for anodes, ingots and castings. Material symbols and material numbers
BS EN ISO 12696:2016 Cathodic protection of steel in concrete
BS EN ISO 14577-4:2016 Metallic materials. Instrumented indentation test for hardness and materials parameters
BS EN ISO 4490:2018 Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
BS EN ISO 4545-2:2017 Metallic materials. Knoop hardness test
BS EN ISO 4545-3:2017 Metallic materials. Knoop hardness test
BS EN ISO 4545-4:2018 Metallic materials. Knoop hardness test
BS EN ISO 4885:2018 Ferrous materials. Heat treatments. Vocabulary
BS EN ISO 4945:2018 Steel. Determination of nitrogen. Spectrophotometric method
BS EN ISO 6581:2018 Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
BS EN ISO 8044:2015 Corrosion of metals and alloys. Basic terms and definitions
BS EN ISO 8993:2018 Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method
BS EN ISO 8994:2018 Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Grid method
BS ISO 12108:2018 Metallic materials. Fatigue testing. Fatigue crack growth method
BS ISO 13583-1:2015 Centrifugally cast steel and alloy products
BS ISO 13583-2:2015 Centrifugally cast steel and alloy products
BS ISO 21207:2015 Corrosion tests in artificial atmospheres. Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
BS ISO 27306:2016 Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
BS ISO 6279:2017 Plain bearings. Aluminium alloys for solid bearings
PD CEN/TS 13388:2015 Copper and copper alloys. Compendium of compositions and products
BS EN 10217-2:2019 Welded steel tubes for pressure purposes. Technical delivery conditions
BS EN 10217-4:2019 Welded steel tubes for pressure purposes. Technical delivery conditions
BS EN 10217-5:2019 Welded steel tubes for pressure purposes. Technical delivery conditions
BS EN 10217-6:2019 Welded steel tubes for pressure purposes. Technical delivery conditions
BS EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
BS EN 12438:2017 Magnesium and magnesium alloys. Magnesium alloys for cast anodes
BS EN 1562:2019 Founding. Malleable cast irons
BS EN ISO 11130:2018 Corrosion of metals and alloys. Alternate immersion test in salt solution
BS EN ISO 14556:2015 Metallic materials. Charpy V-notch pendulum impact test. Instrumented test method
BS EN ISO 15630-1:2019 Steel for the reinforcement and prestressing of concrete. Test methods
BS EN ISO 15630-2:2019 Steel for the reinforcement and prestressing of concrete. Test methods
BS EN ISO 16151:2018 Corrosion of metals and alloys. Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
BS EN ISO 2376:2019 Anodizing of aluminium and its alloys. Determination of breakdown voltage and withstand voltage
BS EN ISO 26203-1:2018 Metallic materials. Tensile testing at high strain rates
BS EN ISO 3690:2018 Welding and allied processes. Determination of hydrogen content in arc weld metal
BS EN ISO 3927:2017 Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
BS EN ISO 3928:2016 Sintered metal materials, excluding hardmetals. Fatigue test pieces
BS EN ISO 4022:2018 Permeable sintered metal materials. Determination of fluid permeability
BS EN ISO 4492:2017 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
BS EN ISO 7441:2015 Corrosion of metals and alloys. Determination of bimetallic corrosion in atmospheric exposure corrosion tests
BS ISO 11484:2019 Steel products. Employer's qualification system for non-destructive testing (NDT) personnel
BS ISO 16172:2018 Steel sheet, metallic-coated by the continuous hot-dip process for corrugated steel pipe
BS ISO 17577:2016 Steel. Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm
BS ISO 18632:2018 Alloyed steels. Determination of manganese. Potentiometric or visual titration method
BS ISO 24213:2017 Metallic materials. Sheet and strip. Method for springback evaluation in stretch bending
BS ISO 3575:2016 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
BS ISO 683-5:2017 Heat treatable steels, alloy steels and free-cutting steels
PD CEN/TR 10261:2018 Iron and steel. European standards for the determination of chemical composition
PD CEN/TR 10364:2018 Steels and cast irons. Determination of substances listed in the directives 2011/65/EU (RoHS) and 2000/53/EC (ELV). Limitations
BS EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
BS EN 593:2017 Industrial valves. Metallic butterfly valves for general purposes
BS EN ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
BS EN 1171:2015 Industrial valves. Cast iron gate valves
BS EN 19:2016 Industrial valves. Marking of metallic valves
BS EN ISO 15848-2:2015 Industrial valves. Measurement, test and qualification procedures for fugitive emissions
BS EN ISO 5210:2017 Industrial valves. Multi-turn valve actuator attachments
BS EN 12627:2017 Industrial valves. Butt welding ends for steel valves
BS EN 736-1:2018 Valves. Terminology
BS EN 736-2:2016 Valves. Terminology
BS ISO 5208:2015 Industrial valves. Pressure testing of metallic valves
BS ISO 7121:2016 Steel ball valves for general-purpose industrial applications
BS EN 2583:2019 Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1 275 MPa (at ambient temperature)/650°C. Technical specification
BS EN 3818:2019 Aerospace series. Bolts, MJ threads, in titanium alloy TI- P64001. Strength class: 1 100 MPa (at ambient temperature). Technical specification
BS EN ISO 15480:2019 Fasteners. Hexagon washer head drilling screws with tapping screw thread
BS EN ISO 7053:2019 Fasteners. Hexagon washer head tapping screws
BS EN 14399-3:2015 High-strength structural bolting assemblies for preloading
BS EN 14399-4:2015 High-strength structural bolting assemblies for preloading
BS EN 4163:2016 Aerospace series. Screws 100$0D countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 $0DC
BS EN 3302:2017 Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification: 1 000 MPa/550 $0DC. Technical specification
BS EN 3820:2017 Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/315 $0DC
BS ISO 23509:2016 Bevel and hypoid gear geometry
PD ISO/TR 10828:2015 Worm gears. Worm profiles and gear mesh geometry
 Your basket
Your basket is empty