20/30416064 DC - BS EN ISO 19085-2. Woodworking machines. Safety. Part 2. Horizontal beam panel circular sawing machines
Maintenance will be taking place for BSI Shop on Saturday 17th April 2021 between 08:00 AM and 14:00 PM UK time. During this period, BSI Shop will be unavailable or may have limited functionality. Please do not make any purchases during these works. Please accept our apologies for any inconvenience caused during this essential maintenance.

20/30416064 DC

BS EN ISO 19085-2. Woodworking machines. Safety. Part 2. Horizontal beam panel circular sawing machines

Status : Current, Draft for public comment   Published : May 2020



This document gives the safety requirements and measures for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the work-piece support, which are manually and/or powered loaded and manually unloaded, designed for continuous production use, hereinafter referred to as “machines”.

It deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.

It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:

  • side pressure device,

  • device for powered unloading,

  • unit for scoring,

  • unit for post-formed/soft-formed edge pre-cutting,

  • panel turning device,

  • front side turn table,

  • pushing out device,

  • pneumatic clamping of the saw blade,

  • powered panel loading device,

  • device for grooving by milling tool,

  • one or more additional cutting lines inside the machine for longitudinal and/or head cut (before the transversal cutting line),

  • work-piece vacuum clamping as part of a front side turn table or of a panel loading device,

  • panel pusher,

  • independent panel pushers,

  • additional panel pushers mounted on the panel pusher carriage,

  • additional panel pusher with integrated label printer device,

  • lifting platform,

  • device for automatic loading of thin panels,

  • device for service panels unloading by gravity,

  • device for service panels powered unloading,

  • device for panel unloading in limited space condition,

  • loading or pre-loading roller conveyors,

  • pressure beam with additional flaps to increase dust extraction efficiency,

  • saw blade cooling system by air or water-air or oil-air.

The machines are designed for cutting panels consisting of

  1. solid wood,

  2. material with similar physical characteristics to wood (see ISO 19085-1:2020, 3.2),

  3. gypsum boards, gypsum bounded fibreboards,

  4. composite materials, with core consisting of e.g. polyurethane or mineral material, laminated with light alloy,

  5. cardboard,

  6. “sponge” / foam board,

  7. matrix engineered mineral boards, silicate boards,

  8. polymer‐matrix composite materials and reinforced thermoplastic / thermoset / elastomeric materials,

  9. aluminium light alloy plates with a maximum thickness of 10 mm,

  10. composite boards made from the materials listed above.

This document does not deal with hazards related to:

  • specific features that differ from the dashed list above;

  • the machining of panels with milling tools for grooving;

  • powered unloading of panels;

  • rear half of split pressure beam on the front cutting line;

  • the combination of a single machine being used with any other machine (as part of a line).

It is not applicable to:

  • machines designed to process aluminium light alloy plates only,

  • machines intended for use in potentially explosive atmospheres,

  • machines manufactured prior to the date of its publication.

Standard Number20/30416064 DC
TitleBS EN ISO 19085-2. Woodworking machines. Safety. Part 2. Horizontal beam panel circular sawing machines
StatusCurrent, Draft for public comment
Publication Date26 May 2020
Normative References(Required to achieve compliance to this standard)ISO 12100:2010, ISO 13849-1:2015, EN 847-1:2017, ISO 14118:2017, ISO 13857:2019, ISO/DIS 19085-1:2020
Informative References(Provided for Information)No other standards are informatively referenced
International RelationshipsISO/DIS 19085-2
Draft Expiry Date19 July 2020
DescriptorsEquipment safety, Safety, Building sites, Health and safety requirements, Sawing machines, Woodworking machines
Title in FrenchMachines à bois — Sécurité — Partie 2: Scies circulaires à panneaux horizontales à presseur Partie 2: Scies circulaires à panneaux horizontales à presseur
File Size8.099 MB
NotesWarning: this draft is not current beyond its expiry date for comments.

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Develop a PAS

Develop a fast-track standardization document in 9-12 months

Worldwide Standards
We can source any standard from anywhere in the world

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version