BS EN 10217-1:2019-TC Tracked changes. Welded steel tubes for pressure purposes

BS EN 10217-1:2019 - TC

Tracked Changes. Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties

Status : Current   Published : June 2019

Format
PDF



What is a tracked changes standard? 

A tracked changes version of a Standard indicates the changes made, during the standards revision process, between the active standard and its previous version. Additions, deletions, and other formatting and/or content revisions are clearly displayed as underlined and strikethrough texts, ensuring all changes made between the two documents are quickly and easily identified.

What is this standard about?

It’s the first in a series of seven European product standards on welded steel tubes and pipes for pressure purposes. Such pipes are mainly for use in industrial pipework specified and designed in accordance with the BS EN 13480 series of standards. Part 1 covers non-alloy HFW and SAW steel tubes and pipes intended for room temperature service.

Who is this standard for?

BS EN 10217 steel tubes and pipes can be used for a whole range of applications including in building services, chemicals, industrial processes, oil and gas processing refining and distribution, shipbuilding, valve and fittings manufacture as well as for product development and commercial issues. Users will include:

  • Steel strip, plate, tube and pipe designers and producers
  • Steel pipe and tube specifiers, stockholders and distributors
  • Providers of testing and assessment facilities
  • Notified bodies under the PED

Why should you use this standard?

This standard will help specifiers, designers and others by setting out the grades for use under the specified conditions.

It was prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to align with the essential requirements of the Pressure Equipment Directive (PED) (2014/68/EU).

The steel grades and properties for the carbon and low alloy steel grades are aligned with those for seamless tubes in the BS EN 10216 series, enabling either seamless or welded tubes to be used in many cases.

High frequency welded (HFW) steel tubes, sometimes referred to as electric resistance welded (ERW), and submerged arc welded (SAW) steel tubes are covered. HFW tubes and pipes are produced from steel strip and are electric welded without the use of added filler metal. SAW pipes are produced from steel plate and are fusion welded using appropriate welding consumables. In general HFW pipes are produced up to 610mm OD, whereas SAW pipes are not typically produced in diameters below 406.4mm.

Note: BS EN 10217 steel tubes and pipes can be used for a whole range of applications from building services to critical industrial requirements involving gas or chemicals, or valve or fitting production. It is therefore very important that the specifier, designer or user selects the most suitable tube or pipe type and grade to meet their requirements from the seven standards in the series.

What’s changed since the last update?

The 2019 update:

  • Reflects current industry practices
  • Updates references, in particular in respect of testing and assessment requirements

Other than the TR1 grades, aligns with the essential requirements of the PED (2014/68/EU)




Standard NumberBS EN 10217-1:2019 - TC
TitleTracked Changes. Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
StatusCurrent
Publication Date04 June 2019
Normative References(Required to achieve compliance to this standard)TR 10261, EN 10020, EN 10027-1, EN 10027-2, EN ISO 148-1:2016, EN ISO 4885, EN 10220, EN ISO 14284, EN 10266, EN ISO 10893-1:2011, EN ISO 5173:2010, EN ISO 10893-7:2011, EN ISO 10893-3:2011, EN ISO 10893-6:2011, EN ISO 8493:2004, EN 10021:2006, EN 10204:2004, EN ISO 10893-10:2011, EN ISO 8492:2013, EN ISO 14174:2012, EN ISO 17639:2013, EN ISO 2566-1:1999, EN 10168:2004, EN ISO 6892-1:2016, EN ISO 10893-2:2011, ISO 11484:2009, EN ISO 10893-11:2011, EN ISO 377:2017
Informative References(Provided for Information)EN ISO 9712:2012
DescriptorsSteels, Unalloyed steels, Seamed pipes, Welding, Pressure pipes, Delivery, Pipes
ICS23.040.10
77.140.75
Title in FrenchTubes soudés en acier pour service sous pression. Conditions techniques de livraison Tubes en acier non allié, soudés électriquement et soudés à l'arc immergé, avec caractéristiques spécifiées à température ambiante
Title in GermanGeschweißte Stahlrohre für Druckbeanspruchungen. Technische Lieferbedingungen Elektrisch geschweißte und unterpulvergeschweißte Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei Raumtemperatur
CommitteeISE/110
ISBN978 0 539 04866 7
PublisherBSI
FormatA4
DeliveryYes
Pages119
File Size3.444 MB
Price£302.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version