19/30394751 DC - BS EN 15094. Safety of machinery. Safety requirements for cold flat rolling mills

19/30394751 DC

BS EN 15094. Safety of machinery. Safety requirements for cold flat rolling mills

Status : Current, Draft for public comment   Published : September 2019

Format
PDF

Format
HARDCOPY



This document specifies the general safety requirements for cold rolling mills for flat products as defined in 3.1.

: Plant (machinery, equipment, devices according Annex D) used for the manufacturing of metal cold rolled flat products from the material supply from entry (1), via the mill stand(s) (2) with roll changing devices (4), to the material removal (3) (see Figure 1).

  • Thermo process equipment, e.g. in accordance with EN 746 series;

  • Strip processing lines according to EN 15061, e.g. pickling line;

  • Abrasive blasting plants according to EN 1248;

  • Coil transporting system before coil take-over-point at the entry section and after coil take-over-point at the exit section, e.g. hook conveyors, overhead cranes, fork lift and railway trucks and other vehicles;

  • Roll shop equipment;

  • Hook conveyors according to EN 619;

  • Non-fixed load lifting attachments, e.g. according to EN 13155;

  • Storage equipment (e.g. high-bay warehouses);

  • Cranes, fork lifts, trucks and railway trucks and other vehicles;

  • Process technology (e.g. systems for rolling lubricant, compressed air, treatment of water, cleaning system for exhaust air);

  • Firefighting system.

    NOTE 1

    Special requirements for protection of persons in case of using asphyxiant gases used in firefighting system is covered by this document, see Annex C.

This document deals with foreseeable significant hazards, hazardous situations and events relevant to cold rolling mills for flat products, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during transport, commissioning, operation and de-commissioning, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment.

NOTE 2

For modernization, this document (C-type standard) can be applied for the part to be modernized.




Standard Number19/30394751 DC
TitleBS EN 15094. Safety of machinery. Safety requirements for cold flat rolling mills
StatusCurrent, Draft for public comment
Publication Date16 September 2019
Normative References(Required to achieve compliance to this standard)EN ISO 14120, EN 15004-1, EN ISO 7731, EN 13480-5, EN ISO 14122-1, ISO 3864-1, EN 981, EN 61496-1, EN 1837, EN 13861, EN 60447, EN 61310-2, EN ISO 4871:2009, EN ISO 13850:2015, ISO 6183, EN ISO 4413, EN ISO 14118:2018, EN ISO 11202, EN 689, EN ISO 11064-1, EN 1299, EN 13480-4, EN 349, EN 614-2, EN 614-1:2006+A1:2009, EN 60825-4, EN ISO 14121-1:2007, EN ISO 14122-2, EN 13480-3, EN 12198-3, EN 13480-2, EN ISO 13857, EN ISO 14122-4, EN ISO 12100:2010, EN 13480-1, EN ISO 4414, EN ISO 13849-1:2015, EN 60204-1:2006/corrigendum Feb. 2010, EN 50171, EN 60825-1, EN ISO 14123-1, EN 62598, EN 12254, EN ISO 13732-1, EN 14253, EN 894-2, EN 61310-1, EN ISO 13732-3, EN 894-1, EN 12198-2, EN 415-8, EN ISO 14122-3, EN 12198-1, ISO 361, EN 62061, EN 894-3, EN 12464-1, EN 842, EN 61800-5-2:2008, EN ISO 13855, EN 1063, EN ISO 14119, EN ISO 7010
Informative References(Provided for Information)EN 14753, EN ISO 11821, EN 15004-1, EN 12094-1, DIN VDE 0833-1:2003, EN 15061, EN ISO 11820, EN ISO 11688-2, EN 1248, EN 619, EN ISO 11546 (all parts), EN 746-1, EN ISO 19353, EN ISO 11691, EN 746-2, EN ISO 6682, EN ISO 11688-1, EN 746-3, EN 61800-5-2:2008
International RelationshipsprEN 15094
Draft Expiry Date05 November 2019
DescriptorsEquipment safety, Metalworking, Safety devices, Hazards, Verification, Production equipment, Metalworking machines, Safety measures, Occupational safety, Cold-working, Instructions for use, Noise (environmental), Rolling mills, Rolled products, Cold rolling, Control equipment
ICS77.180
Title in FrenchSécurité des machines - Prescriptions de sécurité relatives aux laminoirs à froid pour produits plats
Title in GermanSicherheit von Maschinen - Sicherheitsanforderungen an Kaltflachwalzwerke
CommitteeMCE/23
PublisherBSI
FormatA4
DeliveryYes
Pages88
File Size1.638 MB
NotesWarning: this draft is not current beyond its expiry date for comments.
Price£20.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months