19/30394748 DC - BS EN 15093. Safety of machinery. Safety requirements for hot flat rolling mills

19/30394748 DC

BS EN 15093. Safety of machinery. Safety requirements for hot flat rolling mills

Status : Current, Draft for public comment   Published : September 2019

Format
PDF

Format
HARDCOPY



This document specifies the general safety requirements for hot rolling mills for flat products as defined in 3.1.

This document is applicable to: Plant (machinery, equipment, devices according Annex D) used for the manufacturing of metal hot rolled flat products from the material supply from entry (1), via the mill stands (2) with roll changing devices (6), to the exit (5) (see Figure 1).

This standard does not cover:

  • thermo process equipment, e.g. in accordance with the EN 746 series;

  • continuous casting machines according to EN 14753;

  • hook conveyors according to EN 619;

  • non-fixed load lifting attachments, e.g. according to EN 13155;

  • roll shop equipment;

  • storage equipment (e.g. high-bay warehouses);

  • cranes, fork lifts, trucks and railway trucks and other vehicles;

  • process technology (e.g. treatment of water, rolling lubricant, compressed air, etc.);

  • separate cleaning system for exhaust air;

  • firefighting system.

    NOTE 1

    Special requirements for protection of persons in case of using asphyxiant gases used in firefighting system is covered by this document (see Annex C).

This document deals with significant hazards, hazardous situations or hazardous events relevant to hot rolling mills for flat products, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during transport, commissioning, operation and de-commissioning, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment.

NOTE 2

For modernization, this document (C-type standard) can be applied for the part to be modernized.




Standard Number19/30394748 DC
TitleBS EN 15093. Safety of machinery. Safety requirements for hot flat rolling mills
StatusCurrent, Draft for public comment
Publication Date16 September 2019
Normative References(Required to achieve compliance to this standard)EN 349, EN ISO 4414, EN ISO 14120, EN 60447, EN ISO 13857, EN 981, EN ISO 13850:2015, ISO 3864-1, EN 60204-1:2006/corrigendum Feb. 2010, EN ISO 14122-2, EN ISO 4413, EN 12254, EN 62598, EN 12198-3, EN 50171, EN ISO 361, EN 842, ISO 6183, EN ISO 14118, EN 1063, EN ISO 7731, EN 894-1, EN 61496-1, EN 14253, EN ISO 11064-1, EN ISO 13849-1:2015, EN ISO 4871:2009, EN 614-1:2006+A1:2009, EN ISO 14122-4, EN 894-2, EN ISO 13732-1, EN ISO 11202, EN 13861, EN 12464-1, EN 60825-1, EN ISO 13855, EN ISO 14123-1, EN 614-2, EN ISO 14122-3, EN ISO 14119, EN ISO 14122-1, EN 15004-1, EN 60825-4, EN 894-3, EN 61310-1, EN 61310-2, EN 1299, EN ISO 7010, EN ISO 12100:2010
Informative References(Provided for Information)EN ISO 11688-1, EN 619, EN 61800-5-2:2008, EN ISO 13849-2:2012, EN 12094-1, EN ISO 11820, EN ISO 6682, EN 746-1, EN 14753, EN 1837, EN 15004-1, EN ISO 11546 (all parts), EN ISO 11691, EN ISO 11688-2, EN 13478, EN 746-2, EN 746-3, EN ISO 11821, DIN VDE 0833-1:2003
International RelationshipsprEN 15093
Draft Expiry Date05 November 2019
DescriptorsInstructions for use, Noise (environmental), Rolled products, Rolling mills, Safety devices, Equipment safety, Metalworking, Production equipment, Occupational safety, Verification, Hazards, Metalworking machines, Control equipment, Safety measures, Hot-working
ICS77.180
Title in FrenchSécurité des machines - Prescriptions de sécurité relatives aux laminoirs à chaud pour produits plats
Title in GermanSicherheit von Maschinen - Sicherheitsanforderungen an Warmflachwalzwerke
CommitteeMCE/23
PublisherBSI
FormatA4
DeliveryYes
Pages93
File Size1.24 MB
NotesWarning: this draft is not current beyond its expiry date for comments.
Price£20.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world