19/30394745 DC - BS EN 14753. Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel

19/30394745 DC

BS EN 14753. Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel

Status : Current, Draft for public comment   Published : September 2019



This document applies for plant (containing machinery and equipment) used in the process of continuous casting of liquid steel (hereafter referred to as continuous casting machine, CCM) as defined in 3.1. This document deals with all significant hazards, hazardous situations and events relevant to machinery and equipment for the continuous casting of steel, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This document specifies the safety requirements to be met during design, assembly, transport, commissioning, operation, maintenance (as described in Clause 5) and decommissioning of the equipment. This document assumes that the machinery and equipment of the plant is operated and maintained by adequately trained and competent personnel (see 7.5). Manual intervention for setting, adjustment and maintenance is accepted as part of the intended use of the plant. This document assumes that the machinery is used with adequate workstation lighting conforming to EN 12464-1. NOTE National regulations regarding lighting should be considered and could differ from requirements of EN 12464-1. This document applies to: CCM for the transformation of molten liquid steel into solid products in sections (e.g., square, rectangular, beam blank, circular) - CCM's from the point where overhead cranes or other transport systems deposit ladles to CCM (e.g., in a ladle turret, ladle car or ladle stand); - via casting process and solidification process; - via cutting equipment; - thru the run-out-area where the cut product is finished, collected and removed from that area. This document does not cover safety requirements for: - horizontal-CCM for steel; - auxiliary plants (e.g., water treatment, refractory handling); - ladles; - cranes; - winches and hoists; - conveyors or handling systems; - workshop equipment (mould and segment shop, tundish workshop). NOTE It is recommended to use this standard in case of modernization for the parts to be modernized.

Standard Number19/30394745 DC
TitleBS EN 14753. Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
StatusCurrent, Draft for public comment
Publication Date05 September 2019
Normative References(Required to achieve compliance to this standard)EN ISO 14119:2013, EN ISO 14122-3:2016, EN 14253:2003+A1:2007, EN ISO 13849-1:2015, EN ISO 14122-4:2016, EN ISO 7010:2012, EN ISO 14123-2:2015, EN ISO 11688-1:2009, EN ISO 4413:2010, EN 894-1:1997+A1:2008, EN ISO 14122-1:2016, EN 894-3:2000+A1:2008, EN 62061:2017, EN ISO 14122-2:2016, EN ISO 14118:2018, EN 842:1996+A1:2008, EN 60447:2004, EN ISO 14120:2015, EN 12094-1:2003, ISO 7745:2010, EN 61310-2:2008, ISO 361:1975, EN 60204-1:2006/corrigendum Feb. 2010, EN 13480-4:2017, EN 1299:1997+A1:2008, EN 298:2012, EN 60825-1:2014/AC:2017-06, EN 60825-4:2006, EN 61310-1:2008, EN 13480-3:2017, EN 12254:2010/AC:2011, EN 746-2:2010, EN 12198-3:2002+A1:2008, EN 12464-1:2011, EN 13480-5:2017, EN 62598:2013, EN 61496-1:2013, EN 13480-5:2017/A1:2019, EN 61800-5-2:2017, EN 13480-2:2017, EN 349:1993+A1:2008, EN 15004-1:2019, EN 13480-1:2017, EN 614-2:2000+A1:2008, EN ISO 13850:2015, EN ISO 7731:2008, EN 894-2:1997+A1:2008, EN ISO 13732-1:2008, ISO 3864-1:2007, EN ISO 14123-1:2015, EN ISO 11064-1:2000, EN ISO 4414:2010, EN ISO 12100:2010, EN ISO 13857:2008, EN 981:1996+A1:2008, E
Informative References(Provided for Information)EN ISO 11688-2, ISO 5598, EN ISO 6682, EN ISO 11820, EN ISO 11691, EN 60825-4, EN ISO 11821, ISO 11564, EN 894-3
International RelationshipsFprEN 14753
Draft Expiry Date28 October 2019
DescriptorsContinuous casting, Safety devices, Occupational safety, Equipment safety, Casting (process), Verification, Control equipment, Instructions for use, Steels, Foundry equipment, Hazards, Production equipment, Noise (environmental), Safety measures, Steelmaking
Title in FrenchSécurité des machines - Prescriptions de sécurité pour les machines et équipements de coulée continue de l'acier
Title in GermanSicherheit von Maschinen - Sicherheitsanforderungen für Maschinen und Einrichtungen zum Stranggießen von Stahl
File Size1.737 MB
NotesWarning: this draft is not current beyond its expiry date for comments.

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Access, view and download standards with multiple user access, across multiple sites with BSOL

Worldwide Standards
We can source any standard from anywhere in the world

Develop a PAS

Develop a fast-track standardization document in 9-12 months