BS EN IEC 61000-6-1:2019 Electromagnetic compatibility (EMC).

BS EN IEC 61000-6-1:2019

Electromagnetic compatibility (EMC). Generic standards. Immunity standard for residential, commercial and light-industrial environments

Status : Current, Under review   Published : February 2019

Format
PDF

Format
HARDCOPY



 

Looking specifically for industrial environments? Click here for BS EN IEC 61000-6-2:2019



What is this standard about?

This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic equipment intended for use in residential, commercial, public and light-industrial locations. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified.

This generic EMC immunity standard is applicable if no relevant dedicated product or productfamily EMC immunity standard exists.

This standard applies to electrical and electronic equipment intended to be operated in

• residential locations, both indoor and outdoor,

• commercial, public and light industrial locations, as defined in 3.9, both indoor and outdoor.

This standard applies also to equipment which is battery operated or is powered by a nonpublic, but non-industrial, low voltage power distribution system if this equipment is intended to be used in the locations defined in this document.

This standard defines the immunity test requirements for equipment specified in the scope in relation to continuous and transient, conducted and radiated disturbances, including electrostatic discharges.

The immunity requirements have been selected to ensure an adequate level of immunity for equipment operating within residential, commercial, public and light-industrial locations. The levels do not, however, cover extreme cases, which may occur at any location, but with an extremely low probability of occurrence. Not all disturbance phenomena have been included for testing purposes in this standard, but only those considered as relevant for the equipment covered by this standard. These test requirements represent essential electromagnetic compatibility immunity requirements. They are specified for each port considered.




Standard NumberBS EN IEC 61000-6-1:2019
TitleElectromagnetic compatibility (EMC). Generic standards. Immunity standard for residential, commercial and light-industrial environments
StatusCurrent, Under review
Publication Date25 February 2019
Normative References(Required to achieve compliance to this standard)IEC 61000-4-3:2006/AMD1:2007, EN 61000-4-2:2009, EN 61000-4-34:2007/A1:2009, IEC 61000-4-34:2005/AMD1:2009, IEC 61000-4-3:2006, IEC 61000-4-22:2010, EN 61000-4-5:2014, EN 61000-4-3:2006/A1:2008, IEC 61000-4-8:2009, EN 61000-4-22:2011, IEC 61000-4-34:2005, EN 61000-4-3:2006, EN 61000-4-3:2006/A2:2010, EN 61000-4-21:2011, IEC 61000-4-5:2014, IEC 61000-4-21:2011, IEC 61000-4-3:2006/AMD2:2010, EN 61000-4-34:2007, IEC 61000-4-11:2004, EN 61000-4-6:2014, IEC 61000-4-4:2012, EN 61000-4-8:2010, IEC 61000-4-20:2010, IEC 61000-4-6:2013, EN 61000-4-20:2010, IEC 61000-4-2:2008, EN 61000-4-11:2004, EN 61000-4-4:2012, IEC 60050-161
Informative References(Provided for Information)IEC 61000-4-18, IEC 61000-4-12, EN 61000-4-13, EN 61000-4-31, IEC 61000-4-19, EN 61000-4-18, IEC 61000-4-16, IEC 61000-4-29, EN 61000-4-29, EN 61000-4-19, EN 61000-4-12, IEC 61000-4-31, IEC 61000-4-13, EN 61000-4-16
ReplacesBS EN 61000-6-1:2007
International RelationshipsEN IEC 61000-6-1:2019,IEC 61000-6-1:2016
Amended ByCorrigendum, March 2019
DescriptorsFrequencies, Electromagnetic compatibility, Electric power system disturbances, Electrical equipment, Environment (working), Industrial, Electrical testing, Low-voltage equipment, Electromagnetic fields, Direct current, Electronic equipment and components, Performance testing, Commercial, Domestic, Electromagnetic radiation, Radio disturbances, Noise (spurious signals)
ICS33.100.20
Title in FrenchCompatibilité électromagnétique (CEM) Normes génériques. Norme d'immunité pour les environnements résidentiels, commerciaux et de l'industrie légère
Title in GermanElektromagnetische Verträglichkeit Fachgrundnormen. Störfestigkeit für Wohnbereich, Geschäfts- und Gewerbebereiche sowie Kleinbetriebe
CommitteeGEL/210
ISBN978 0 539 04230 6
PublisherBSI
FormatA4
DeliveryYes
Pages24
File Size857 KB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Customers who bought this product also bought

  • BS EN IEC 61000-6-2:2019
    Electromagnetic compatibility (EMC) Generic standards. Immunity standard for industrial environments
  • BS EN 61000-6-3:2007+A1:2011
    Electromagnetic compatibility (EMC) Generic standards. Emission standard for residential, commercial and light-industrial environments
  • BS EN IEC 61000-6-4:2019
    Electromagnetic compatibility (EMC) Generic standards. Emission standard for industrial environments
  • BS EN 61000-3-3:2013+A1:2019
    Electromagnetic compatibility (EMC) Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection