BS ISO 4386-2:2019 Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm

BS ISO 4386-2:2019

Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm

Status : Current   Published : April 2019

Format
PDF

Format
HARDCOPY



What is this standard about?

This document specifies a tensile test method for determination of the bond strength between the bearing metal and the backing. The test can be applied to multilayer plain bearings with bearing metals based on lead, tin, copper or aluminium. For tested layer thicknesses ≥ 2 mm, a raw lining thickness of a minimum additional 1 mm is necessary.

The backings are from steel, cast steel or copper alloys. The bond strength test does not apply to bearings with cast iron backing.

The test applies to all thrust bearings and to journal bearings with an inner diameter of backing ≥ 90 mm.

The test can be used for comparative investigations into the influence on the bond strength of various processes and types of material. In addition, the test is suitable for production control and for process qualification of bearing production.

For non-destructive ultrasonic testing of the bond between bearing metal and backing for bearing metal layer thicknesses ≥ 2 mm, see ISO 4386-1.




Standard NumberBS ISO 4386-2:2019
TitlePlain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
StatusCurrent
Publication Date24 April 2019
Normative References(Required to achieve compliance to this standard)No other standards are normatively referenced
Informative References(Provided for Information)ISO 4381
ReplacesBS ISO 4386-2:2012
International RelationshipsISO 4386-2:2019
DescriptorsAdhesion tests, Compression testing, Bearings, Laminates, Testing conditions, Plain bearings, Bonding, Dimensions, Designations, Thickness, Test equipment, Dimensional tolerances, Metals, Joints, Test specimens, Specimen preparation, Tensile testing, Destructive testing, Alloys
ICS21.100.10
Title in FrenchPaliers lisses. Paliers lisses métalliques multicouches Détermination, par essai destructif, de l'adhérence du matériau antifriction d'épaisseur supérieure ou égale à 2 mm
CommitteeMCE/12
ISBN978 0 539 03079 2
PublisherBSI
FormatA4
DeliveryYes
Pages20
File Size2.44 MB
Price£130.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards