BS ISO 4386-1:2019 Plain bearings. Metallic multilayer plain bearings. Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm

BS ISO 4386-1:2019

Plain bearings. Metallic multilayer plain bearings. Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm

Status : Current   Published : May 2019

Format
PDF

Format
HARDCOPY



What is this standard about?

This document specifies an ultrasonic testing method for determining bond defects between the bearing metal and the backing. The test can be performed on metallic multilayer plain bearings consisting of steel- or copper-based material backings lined with bearing metal based on lead and tin, with layer thicknesses greater than or equal to 0,5 mm. For cast iron backings, this document is applicable with restrictions.

The ultrasonic signal reflected by the bond interface between the bearing metal and the backing is used to determine bonding defects.

Ultrasonic testing is not possible on edge zones of sliding surface, flange sides, joint areas, oil holes, grooves, etc. in a range of less than half the diameter of the ultrasonic probe because of undefined reflections. The same applies to bearings with dovetail keying grooves at the bond. Ultrasonic testing of bond does not apply along the edges of the dovetails.

Evaluation of the bond on the visible transition from the backing to the bearing metal (on end faces or joint faces) is only practicable by the penetrant testing method specified in ISO 4386-3.

This document only describes in detail the pulse-echo method. Within the meaning of this document, the ultrasonic method only permits a qualitative evaluation of the bonding and not a quantitative determination of the bond strength. The ultrasonic bond test differs only between bond and bond defect.




Standard NumberBS ISO 4386-1:2019
TitlePlain bearings. Metallic multilayer plain bearings. Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
StatusCurrent
Publication Date03 May 2019
Normative References(Required to achieve compliance to this standard)ISO 4386-3
Informative References(Provided for Information)ISO 4287, ISO 6280
ReplacesBS ISO 4386-1:2012
International RelationshipsISO 4386-1:2019
DescriptorsPlain bearings, Grades (quality), Joints, Designations, Sonic testing, Bearings, Specimen preparation, Ultrasonic testing, Thickness, Bonding, Defects, Testing conditions, Laminates, Flaw detection, Metals, Alloys, Non-destructive testing
ICS21.100.10
Title in FrenchPaliers lisses — Paliers lisses métalliques multicouches — Partie 1: Contrôle non destructif aux ultrasons des défauts d'adhérence d'épaisseur supérieure ou égale à 0,5 mm Contrôle non destructif aux ultrasons des défauts d'adhérence d'épaisseur supérieure ou égale à 0,5 mm
CommitteeMCE/12
ISBN978 0 539 03078 5
PublisherBSI
FormatA4
DeliveryYes
Pages16
File Size586 KB
Price£130.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world