19/30386973 DC - BS EN 15502-1. Gas-fired heating boilers. Part 1. General requirements and tests

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

19/30386973 DC

BS EN 15502-1. Gas-fired heating boilers. Part 1. General requirements and tests

Status : Draft for public comment, Current   Published : October 2019

Format
PDF

Format
HARDCOPY



This European Standard specifies the common requirements and test methods, as well as the classification, marking and energy labelling of gas-fired central heating boilers that are fitted with atmospheric burners, fan assisted atmospheric burners or fully premixed burners, and are hereafter referred to as “boilers”. This European Standard is to be used in conjunction with the specific Parts 2 (Part 2-1 and following ones). This European Standard applies to boilers of types B and C. NOTE For further background information on appliance types see CEN/TR 1749:2014 [1]. a) that use one or more combustible gases of the three gas families at the pressures stated in EN 437; b) where the temperature of the water is below or above 105 °C during normal operation; c) where the maximum operating pressure in the water circuit does not exceed 6 bar; d) which can give rise to condensation under certain circumstances; e) which are declared in the instructions for installation to be either a "condensing" boiler or a "low temperature boiler" or a "standard boiler" or an "other boiler". If no declaration is given the boiler is to be considered both a "standard boiler" and an "other boiler"; NOTE The Ecodesign Directive defines "other boilers", "low temperature boilers" and "condensing boilers". The Boiler Efficiency Directive defines "standard boilers", "low temperature boilers" and "condensing boilers". Depending on the legislation applied, a boiler can be both "a standard boiler" and an "other boiler"." f) which are intended to be installed inside a building or in a partially protected place; g) which are intended to produce also hot water either by the instantaneous or storage principle as a single unit. This European Standard applies to boilers designed for sealed water systems or for open water systems. NOTE This general standard and the specific standards (see Part 2) provide requirements for boilers with known constructions. For boilers with any alternative constructions, which might not fully be covered by this standard or a specific standard, the risk associated with this alternative construction will need to be assessed. An example of an assessment methodology, based upon risk assessment, is given in Clause 11. This European Standard is not intended to cover appliances intended for connection to gas grids where the quality of the distributed gas is likely to vary to a large extent over the lifetime of the appliance (see Annex EE). This European Standard is not intended to cover appliances designed and constructed to burn gas containing toxic components.




Standard Number19/30386973 DC
TitleBS EN 15502-1. Gas-fired heating boilers. Part 1. General requirements and tests
StatusDraft for public comment, Current
Publication Date24 October 2019
Cross ReferencesEN 50090, EN ISO 228-1:2003, EN 1092-4:2002, EN 126:2012, EN 1092-1:2018, EN ISO 3166-1:2014, EN 298:2012, EN 15036-1:2006, EN 60529:1991, EN 10226-2:2005, EN 13611:2019, EN 1092-3:2003, IEC 60730-2-9:2015, EN 13203-2:2018, EN 60335-2-102:2016, EN 13203-1:2015, IEC 60529:1989 Cons Ed 2-1, IEC 60335-2-102:2004, IEC 60335-1:2010, IEC 60335-2-102:2004/AMD1:2008, EN 10029:2010, ISO 4063:2009, ISO 857-1:1998, ISO 2553:2019, ISO 857-2:2005, ISO 3166-1:2013, EN 437:2018, EN 1092-2:1997, EN IEC 60730-2-9:2019, EN 10226-1:2004, EN 125:2010+A1:2015, EN 14459:2015, IEC 60335-2-102:2004/AMD2:2012, ISO 228-1:2000, EN 60335-1:2012, EN 1057:2006+A1:2010, EN ISO 2553:2019, EN 12067-2:2004, EN 88-1:2011+A1:2016, EN ISO 4063:2010, EN 161:2011+A3:2013, PD 6574:1994, EN 15456:2008, EN 60730-1:2011, EN 13836:2006, prEN 1749
International RelationshipsprEN 15502-1:2019
Draft Expiry Date17 December 2019
DescriptorsHot-water supply systems, Test equipment, Testing conditions, Ignition systems (heat engineering), Performance testing, Automatic control systems, Performance, Domestic safety, Thermal testing, Maintenance, Classification systems, Temperature, Control devices, Leak tests, Fire safety, Instructions for use, Combustion, Mathematical calculations, Gas space heating, Valves, Electrical safety, Installation, Water heaters, Stability, Domestic, Hot-water boilers, Design, Pressure testing, Flames, Temperature rise, Combustion products, Flues, Boilers, Marking, Central heating, Gas-powered devices
ICS27.060.30
91.140.10
Title in FrenchChaudières de chauffage central utilisant les combustibles gazeux - Partie 1: Exigences générales et essais
Title in GermanHeizkessel für gasförmige Brennstoffe - Teil 1: Allgemeine Anforderungen und Prüfungen
CommitteeGSE/29
PublisherBSI
FormatA4
DeliveryYes
Pages217
File Size3.299 MB
NotesWarning: this draft is not current beyond its expiry date for comments.
Price£36.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.