BS EN 12814-4:2018 - Testing of welded joints of thermoplastics semi-finished products. Peel test

BS EN 12814-4:2018

Testing of welded joints of thermoplastics semi-finished products. Peel test

Status : Current   Published : April 2018

Format
PDF

Format
HARDCOPY



This document specifies the dimensions, the method of sampling and the preparation of the test specimens, and also the conditions for performing the peel test perpendicular to the weld in order to determine the peel resistance and the failure behaviour. A peel test can be used in conjunction with other tests (e.g. tensile creep, macroscopic examination...) to assess the performance of welded assemblies, made from thermoplastics materials. Peel tests are applicable to overlap welded assemblies made from thermoplastics materials. The T-peel test as defined in Clause 5 will be used only for assessing welded sheet assemblies. This test is not applicable to welded test pieces containing sheets of different nominal thickness. The decohesion test as defined in Clause 6 will be used only for assessing electrofusion joints with nominal thickness of pipe/fitting greater than 10 mm. For socket fusion and for electrofusion socket joints with nominal outside diameter less than or equal to 90 mm, a crush test will be used, as defined in Clause 7. The crush test can also be used for electrofusion joints with outside diameters greater than 90 mm. The crush test for electrofusion saddle joints will be performed in accordance with ISO 13955 [1]. NOTE A decohesion test is also defined in ISO 13954 [2]. The tests defined in this standard are not intended to be used for assessment and/or qualification of thermoplastic fittings that already have their own requirements, e.g. polyethylene fittings according to EN 1555-3 [3] and EN 12201-3 [4].




Standard NumberBS EN 12814-4:2018
TitleTesting of welded joints of thermoplastics semi-finished products. Peel test
StatusCurrent
Publication Date17 April 2018
Normative References(Required to achieve compliance to this standard)ISO 5893
Informative References(Provided for Information)EN 14728, ISO 13954, EN 12201-3, CEN/TS 16892, ISO 13955, EN 1555-3
ReplacesBS EN 12814-4:2001
International RelationshipsEN 12814-4:2018+AC:2018
Amended ByCorrigendum, August 2018
DescriptorsPeel resistance, Welding, Semi-finished products, Mechanical testing, Plastics, Joints, Thermoplastic polymers, Welded joints, Peeling tests
ICS25.160.40
Title in FrenchEssai des assemblages soudés sur produits semi-finis en thermoplastiques Essai de pelage
Title in GermanPrüfen von Schweißverbindungen aus thermoplastischen Kunststoffen Schälversuch
CommitteePRI/80
ISBN978 0 539 01823 3
PublisherBSI
FormatA4
DeliveryYes
Pages20
File Size595 KB
Price£130.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version