BS EN 13016-1:2018, BS 2000-394:2018 - Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)

BS EN 13016-1:2018, BS 2000-394:2018

Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)

Status : Current   Published : April 2018

Format
PDF

Format
HARDCOPY



This European Standard specifies a method for the determination of the air saturated vapour pressure (ASVP) (total vapour pressure), exerted in vacuo, by volatile, low viscosity petroleum products, components, ethanol blends up to 85 % (V/V), and feedstocks containing air. A dry vapour pressure equivalent (DVPE) can be calculated from the air containing vapour pressure (ASVP) measurement. The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1 and a test temperature of 37,8 °C. The equipment is not wetted with water during the test, and the method described is therefore suitable for testing samples with or without oxygenates; no account is taken of dissolved water in the sample. This method described is suitable for testing air saturated samples with a DVPE between 15,5 kPa and 106,0 kPa; vapour pressures outside this range can be measured but the precision has not been determined. This document is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant Council Directive 85/536/EEC [10], and for ethanol-fuel blends up to 85 % (V/V) ethanol. NOTE For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass and volume fractions respectively. WARNING - The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this standard to take appropriate measures to ensure the safety and health of personnel prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.




Standard NumberBS EN 13016-1:2018, BS 2000-394:2018
TitleLiquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
StatusCurrent
Publication Date20 April 2018
Normative References(Required to achieve compliance to this standard)EN ISO 3170, ISO 3170
Informative References(Provided for Information)ISO 3007, ASTM D5191, ISO 3171, ASTM RR. D02-1619, ASTM D4953, EN ISO 3171, ASTM RR. D02-1805, ASTM RR. D02-1286, EN 228, IP 394
ReplacesBS EN 13016-1:2007, BS 2000-394:2007
International RelationshipsEN 13016-1:2018
Amended ByCorrigendum, May 2018
DescriptorsVapour pressure, Saturated vapour pressure, Liquid fuels, Pressure, Testing conditions, Pressure measurement (fluids), Liquids, Temperature, Air, Petroleum, Physico-chemical methods, Petroleum products
ICS75.160.20
Title in FrenchProduits pétroliers liquides. Pression de vapeur Détermination de la pression de vapeur saturée en air (PVSA) et de la pression de vapeur sèche équivalente calculée (PVSE)
Title in GermanFlüssige Mineralölerzeugnisse. Dampfdruck Bestimmung des luftgesättigten Dampfdruckes (ASVP) und des berechneten dem trockenen Dampfdruck entsprechenden Druckes (DVPE)
CommitteePTI/13
ISBN978 0 539 01065 7
PublisherBSI
FormatA4
DeliveryYes
Pages18
File Size456 KB
Price£130.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world