BS EN IEC 61496-1:2020 - Safety of machinery. Electro-sensitive protective equipment. General requirements and tests

BS EN IEC 61496-1:2020

Safety of machinery. Electro-sensitive protective equipment. General requirements and tests

Status : Current   Published : September 2020

Format
PDF

Format
HARDCOPY



IEC 61486-1:2020 specifies general requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons or part of a person as part of a safety-related system. Special attention is directed to functional and design requirements that ensure an appropriate safety-related performance is achieved. An ESPE can include optional safety-related functions, the requirements for which are given in Annex A. This document is intended to be used with a subsequent part of IEC 61496 that provides particular requirements based on the sensing technology. Where a part covering the sensing technology does not exist, IEC TS 62998-1 is used. Where the IEC 61496 series does not contain all necessary provisions, IEC TS 62998-1 is used. It is an additional possibility to combine those aspects covered by the IEC 61496 series in addition to IEC TS 62998-1. This document does not specify the dimensions or configuration of the detection zone and its disposition in relation to hazards in any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. While a data interface can be used to control optional safety-related ESPE functions (Annex A), this document does not provide specific requirements. Requirements for these safety-related functions can be determined by consulting other standards (for example, IEC 61508 (all parts), IEC TS 62046, IEC 62061, and ISO 13849-1). This document can be relevant to applications other than those for the protection of persons, for example for the protection of machinery or products from mechanical damage. In those applications, different requirements can be appropriate, for example when the materials that have to be recognized by the sensing function have different properties from those of persons. This document does not deal with requirements for ESPE functions not related to the protection of persons (e.g. using sensing unit data for navigation). This document does not deal with electromagnetic compatibility (EMC) emission requirements. IEC 61486-1:2020 cancels and replaces the third edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) It has been clarified that some requirements for ESPEs that are dependent on sensing technology are not included in IEC 61496-1. They are provided in a subsequent part of IEC 61496. b) Requirements for protection against environmental influences from subsequent parts of IEC 61496 that are common to all ESPEs have been consolidated into IEC 61496-1. c) Some test procedures in IEC 61496-1 were incomplete. They have been expanded with more detail and step by step procedures. d) Some requirements and procedures in IEC 61496-1 are now covered by new generic machine safety standards. The requirements in IEC 61496-1 have been harmonized with references to the new generic standards.




Standard NumberBS EN IEC 61496-1:2020
TitleSafety of machinery. Electro-sensitive protective equipment. General requirements and tests
StatusCurrent
Publication Date30 September 2020
Normative References(Required to achieve compliance to this standard)IEC 61000-4-3:2006/AMD1:2007, EN 61000-4-5:2014/A1:2017, EN ISO 13849-2:2012, EN 61000-4-6:2014, IEC 61000-4-11:2020, IEC 61000-4-29:2000, EN 60204-1:2018, IEC 60204-1:2016, IEC 61000-4-2:2008, IEC 61000-4-4:2012, IEC 60947-1:2007/AMD2:2014, IEC 61000-4-6:2013, EN 60947-1:2007, IEC 60947-1:2007, EN 61000-4-3:2006, IEC 61000-4-5:2014, ISO 12100, IEC 60068-2-27, IEC 60445, IEC 60417, EN ISO 13849-1, ISO 13849-1, IEC 60721-3-5, IEC 60529, EN 60721-3-5, EN 61508, EN ISO 12100, EN IEC 61000-4-11:2020, EN 60068-2-27, IEC 62061, IEC TR 60721-4-3, EN 60068-2-6, IEC 60068-2-6, IEC 61508 (all parts), IEC 61000-4-5:2014/AMD1:2017, EN 61000-4-3:2006/A2:2010, EN 61000-4-2:2009, IEC 61000-4-3:2006/AMD2:2010, ISO 13849-2:2012, EN 61000-4-5:2014, EN 61000-4-4:2012, EN 61000-4-29:2000, EN 61000-4-3:2006/A1:2008, IEC 61000-4-3:2006, EN 60947-1:2007/A2:2014
Informative References(Provided for Information)EN IEC 62046, EN IEC 60812, IEC 60447, EN 61010-1, EN 61025, IEC 60812, EN 60447, IEC 61000-6-2, IEC 62046, EN IEC 61000-6-2, IEC 61010-1, IEC TS 62998-1, IEC 61025, EN 61000-6-7 (IEC 61000-6-7:2014) AS, IEC 61131-2:2017, IEC TR 60721-4-5:2001/AMD1:2003, EN 61131-2:2017, IEC TR 60721-4-5:2001, IEC 61000-6-7:2014
ReplacesBS EN 61496-1:2013
International RelationshipsEN IEC 61496-1:2020,IEC 61496-1:2020
Amended ByAmendment,
Draft Superseded By18/30377716 DC
DescriptorsElectric enclosures, Interlocks, Occupational safety, Noise (spurious signals), Verification, Computer software, Electromagnetic radiation, Electrostatics, Optoelectronic devices, Type testing, Integrated circuits, Safety devices, Electrical faults, Compatibility, Electrical protection equipment, Inspection, Transient voltages, Electrical components, Radiofrequencies, Marking, Safety measures, Control equipment, Performance, Environment (working), Electrical equipment, Performance testing, Testing conditions, Design, Control devices, Voltage, Electromagnetic fields, Control systems, Equipment safety, Instructions for use, Environmental testing
ICS13.110
29.260.99
Title in FrenchSécurité des machines. Équipements de protection électrosensibles Exigences générales et essais
Title in GermanSicherheit von Maschinen. Berührungslos wirkende Schutzeinrichtungen Allgemeine Anforderungen und Prüfungen
CommitteeMCE/3
ISBN978 0 539 01013 8
PublisherBSI
FormatA4
DeliveryYes
Pages66
File Size1.508 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world