BS 8500-1:2015+A1:2018 Concrete. Complementary British Standard to BS EN 206

BS 8500-1:2015+A2:2019

Concrete. Complementary British Standard to BS EN 206. Method of specifying and guidance for the specifier

Status : Current   Published : December 2015

Format
PDF

Format
HARDCOPY




BS 8500-1:2015+A2:2019 also available with tracked-changes. To learn more and buy, click HERE. 

What is this standard about?

This is Part 1 in a two-part series of British Standards which supplements the European concrete specifying standard. It describes the most up-to-date methods of specifying concrete and as such is an essential guide for concrete buyers in the UK.  

Who is this standard for?

  • Factory production control managers and commercial technical managers working for ready mix concrete manufacturers
  • Concrete contractors and specifiers can use this information to assist designers

Why should you use this standard?

This part of BS 8500 describes ways of specifying concrete and gives specifiers guidance.

It specifies requirements for: the constituents of concrete, the properties of fresh and hardened concrete and their verification, the limitations for concrete composition, the specification of concrete, the delivery of fresh concrete, the production control procedures and the conformity criteria and evaluation of conformity.

Annex A provides guidance on the concrete quality to be specified for selected exposure classes, intended working life and nominal cover to normal reinforcement.

This part of BS 8500 complements BS EN 206. It provides UK national provisions where required or permitted by BS EN 206. It also covers materials, methods of testing and procedures that are outside the scope of BS EN 206, but within national experience.

NOTE: BS 8500 does not give guidance on stainless steel and non-metallic reinforcement. Guidance on nominal cover to reinforcement for structural and fire consideration is available in other publications, e.g. structural design codes of practice.

What’s changed since the last update?

This amendment is predominantly concerned with increasing the range of cementitious materials covered. These now include: natural pozzolana, natural calcined pozzolana or high reactivity natural calcined pozzolana as an addition, Portland‐pozzolana and pozzolanic cements, as well as a range of ternary cements which include up to 20% limestone fines.

As well, the option to use durability modelling or an equivalent durability procedure is clarified and minor editorial changes have been made, such as the change of nomenclature from N/mm2 to MPa for stress.




Standard NumberBS 8500-1:2015+A2:2019
TitleConcrete. Complementary British Standard to BS EN 206. Method of specifying and guidance for the specifier
StatusCurrent
Publication Date22 December 2015
Normative References(Required to achieve compliance to this standard)BS 8500-2:2015+A2:2019, BS EN 206:2013+A1:2016, BS EN 12350-1, BS EN 12350-6, BS EN 12350-7, BS EN 12350-5, BS EN 12350-8, ASTM C173, BS EN 12390-7, BS EN 12350-2
Informative References(Provided for Information)BS EN 1992-1-1, BS EN 1744-1, BS EN ISO 9001, BS EN 12620, BS EN 13877-1, BS EN 1990, BS EN 1367-4, NA to BS EN 1992-1-1, BS EN 13286-51, BS 5502-21, PD CEN/TR 16563, BS 5502-22, BS EN 13813, BS 8204-2, BS EN 13670, BS EN 13055-1, BS EN 1992-1-2, BS 6349-1-4, BS EN 1367-2, BS EN 12390-3, BS EN 14227-1, BS EN 13369, BS EN 197-1, PD 6682-1, BS EN 13877-2
ReplacesBS 8500-1:2006+A1:2012
Amended ByAmendment, January 2019; Corrigendum, August 2016
Draft Superseded By18/30371361 DC
DescriptorsConstruction materials, Test methods, Structures, Chlorides, Concretes, Environment (working), Compressive strength, Reinforcing steels, Aggregates, Composition, Classification systems, Identification methods, Corrosion, Delivery, Degradation, Conformity, Cement and concrete technology, Cements, Strength of materials, Selection, Life (durability), Production, Grades (quality), Ordering
ICS91.100.30
CommitteeB/517/1
ISBN978 0 580 52485 1
PublisherBSI
FormatA4
DeliveryYes
Pages74
File Size3.346 MB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought