BS EN IEC 61010-2-010:2020 - Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of materials

BS EN IEC 61010-2-010:2020

Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of materials

Status : Current   Published : May 2020

Format
PDF

Format
HARDCOPY



This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the second paragraph by the following: This part of IEC 61010 specifies particular safety requirements for the following types a) to c) of electrical equipment and their accessories, wherever they are intended to be used, whenever the heating of materials is one of the functions of the equipment. Addition: Add the following text after item c): It is possible that all or part of the equipment falls within the scope of one or more other Part 2 standards of IEC 61010 as well as within the scope of this standard. In that case, the requirements of those other Part 2 standards will also apply. In particular, if equipment is intended to be used for in vitro diagnostic (IVD) purposes, the requirements of IEC 61010-2-101 will also apply. However, when the equipment incorporates a refrigerating system and a heating function where the combination of the two introduces additional or more severe HAZARDS than if treated separately, then it is possible that IEC 61010-2-012 is applicable instead of this Part 2-010. See further information in the flow chart (Figure 102) for the selection process and the guidance in the Introduction. 1.1.2 Equipment excluded from scope Addition: Add the following items after item j): aa) equipment for the heating and ventilation of laboratories; bb) sterilizing equipment; cc) heating and/or cooling equipment which the OPERATOR is intended to enter, and which is large enough for the OPERATOR to remain inside with the door or doors closed.




Standard NumberBS EN IEC 61010-2-010:2020
TitleSafety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of materials
StatusCurrent
Publication Date29 May 2020
Normative References(Required to achieve compliance to this standard)ISO 7010, EN ISO 7010:2012, ISO 7010:2011/Amd 2:2012, ISO 7010:2011/Amd 6:2014, ISO 7010:2011/Amd 3:2012, ISO 7010:2011/Amd 8:2017, ISO 7010:2011/Amd 5:2014, ISO 7010:2011/Amd 4:2013, ISO 7010:2011/Amd 7:2016, ISO 7010:2011/Amd 1:2012
Informative References(Provided for Information)DIN 12876-1, IEC 60335-2-6:2014, EN 60335-2-6:2015
ReplacesBS EN 61010-2-010:2014
International RelationshipsIEC 61010-2-010:2019,EN IEC 61010-2-010:2020
DescriptorsTemperature-rise limit, Temperature rise, Earth-leakage circuit-breakers, Classification systems, Protected electrical equipment, Control systems, Warning devices, Rated current, Thermal protection, Electrical safety, Electrical equipment, Laboratory equipment, Cleaning, Safety measures, Temperature control, Electrically-operated devices, Equipment safety, Electric heaters, Electrical components, Instructions for use, Vacuum plant, Marking, Electrical protection equipment, Electronic equipment and components, Rated power, Heating equipment
ICS11.080.10
19.080
71.040.20
Title in FrenchExigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Exigences particulières pour appareils de laboratoire utilisés pour l'échauffement des matières
Title in GermanSicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte Besondere Anforderungen für Laborgeräte für das Erhitzen von Stoffen
CommitteeEPL/66
ISBN978 0 580 52309 0
PublisherBSI
FormatA4
DeliveryYes
Pages34
File Size1.115 MB
Price£214.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Customers who bought this product also bought

  • BS EN 61010-1:2010+A1:2019
    Safety requirements for electrical equipment for measurement, control, and laboratory use General requirements