ISO 21138-1:2020 - Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Material specification and performance criteria for pipes, fittings and systems

ISO 21138-1:2020

Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Material specification and performance criteria for pipes, fittings and systems

Status : Current   Published : January 2020

Format
PDF

Format
HARDCOPY



This document, together with ISO 21138-2 and ISO 21138-3, specifies the definitions and requirements for pipes, fittings and systems based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems intended to be used in non-pressure underground drainage and sewerage applications.

NOTE 1

Pipes, fittings and the system complying with this document can also be used for highway drainage and surface water.

This document covers a range of pipe and fitting sizes, materials, pipe constructions, nominal ring stiffnesses, and gives recommendations concerning colours.

NOTE 2

It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and installation practices or codes.

In conjunction with ISO 21138-2 and ISO 21138-3, this document is applicable to structured-wall pipes and fittings, to their joints and to joints with components of other plastics and non-plastics materials.

It is applicable to structured-wall pipes and fittings with or without an integral socket with elastomeric ring seal joints as well as welded and fused joints.

NOTE 3

Pipes, fittings and other components conforming to any plastics product standards referred to in the Bibliography can be used with pipes and fittings conforming to this document when they conform to the requirements for joint dimensions given in ISO 21138-2 and ISO 21138-3 and to the performance requirements given in Clause 9.

NOTE 4

For dimensions larger than DN/OD 1200 or DN/ID 1200, this document can serve as a general guideline regarding appearance, colour, physical and mechanical characteristics as well as performance requirements.




Standard NumberISO 21138-1:2020
TitlePlastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Material specification and performance criteria for pipes, fittings and systems
StatusCurrent
Publication Date20 January 2020
Normative References(Required to achieve compliance to this standard)ISO 1183-1, EN 681-2, ISO 21138-2, ISO 11357-6, ISO 13259, ISO 13264, ISO 12091, ISO 11173, EN 681-1, ISO 580, ISO 13262, ISO 9969, ISO 13254, EN 681-4, ISO 1133-1, ISO 3126, ISO 3127, ISO 9852, ISO 1167-1, ISO 2505, ISO 13263, ISO 1043-1, ISO 9967, ISO 11922-1, ISO 13968, ISO 472, ISO 13967, ISO 2507-1, ISO 13265, ISO 1167-2, ISO 2507-2, ISO 21138-3
Informative References(Provided for Information)EN 1610:1997, ISO 265-1, ISO 4435, ISO 178, EN 295-3, ISO 11359-2, ISO 8773, ISO/TR 7620, EN 1295-1, ISO/TR 10358, ISO 8772
Draft Superseded ByISO/DIS 21138-1
DescriptorsMaterials specification, Polyethylene, Polypropylene, Unplasticized polyvinyl chloride, Drainage, Piping systems, Plastic pipes
ICS23.040.20
23.040.45
91.140.80
93.030
Title in FrenchSystèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement sans pression enterrés -- Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) Partie 1: Spécification des matières et critères de performance des tubes, raccords et système
CommitteePRI/88/1
PublisherISO
FormatA4
DeliveryYes
Pages24
File Size1.208 MB
Price£71.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

Access, view and download standards with multiple user access, across multiple sites with BSOL


Worldwide Standards
We can source any standard from anywhere in the world