BS EN 50174-2:2018 - Information technology. Cabling installation. Installation planning and practices inside buildings

BS EN 50174-2:2018

Information technology. Cabling installation. Installation planning and practices inside buildings

Status : Current   Published : July 2018

Format
PDF

Format
HARDCOPY



1.1 Scope This European Standard specifies requirements for the following aspects of information technology cabling: a) planning; b) installation practice. This European Standard is applicable to all types of information technology cabling inside buildings (and may be applied to cabling that is defined as part of the building) including generic cabling systems designed in accordance with the EN 50173 series. The requirements of Clauses 4, 5 and 6 of this standard are premises-independent unless amended by the requirements of premises-specific clauses. This European Standard: 1) details the considerations for satisfactory installation and operation of information technology cabling; 2) describes the methodology for the assessment of spaces, pathways (and pathway systems) and cabling (either installed or planned) in support of remote powering objectives; 3) excludes specific requirements applicable to other cabling systems (e.g. power supply cabling); however, it takes account of the effects other cabling systems have on the installation of information technology cabling (and vice versa) and gives general advice; 4) excludes those aspects of installation associated with the transmission of signals in free space between transmitters, receivers or their associated antenna systems (e.g. wireless, radio, microwave or satellite). This European Standard is intended for application within commercial and residential premises. This standard is applicable to certain hazardous environments. It does not exclude additional requirements which are applicable in particular circumstances, defined by e.g. electricity supply and electrified railways. 1.2 Conformance For a cabling installation to conform to this European Standard: a) the planning of the installation shall meet the requirements of Clause 4; b) the installation practices shall meet the requirements of Clause 5; c) the additional requirements of the applicable premises-specific clause shall be met; d) the bonding system within the premises shall be in accordance with EN 50310; e) where a lightning protection system is required, it shall conform to the “integrated lightning protection system" according to EN 62305-4; f) other lightning protection systems, including the “isolated lightning protection system” according to EN 62305-3 are allowed provided that specific restrictions are applied both to the implementation of the information technology cabling and the requirements of EN 50310 as agreed between the planners of the lightning protection system and the information technology cabling; g) local regulations shall be met. The responsibilities for specific elements of conformance may be made by national-specific amendment of Annex B.




Standard NumberBS EN 50174-2:2018
TitleInformation technology. Cabling installation. Installation planning and practices inside buildings
StatusCurrent
Publication Date13 July 2018
Normative References(Required to achieve compliance to this standard)EN 61784-2, EN 61643, EN 50085-2-X, EN 61537, EN 50310, IEC 61558-1, EN 60529, EN 50173-6, IEC 61784-3, EN 60079-14, EN 50600-2-4, IEC 61000-6, EN 50174-3, IEC 62949, EN 50491, EN 61534, IEC 61784-3-1, HD 60364-5, IEC 60825-2, IEC 60364-5, EN 50288, HD 60364, EN 62368-3, EN 60825-2, IEC 61386-1, EN 60079-0, IEC 61784-2, EN 60332-1-2, EN 13501-6, EN 50173-4, IEC 61918, IEC 60529, IEC 61386-2X, EN 61300-3-35, EN 61000-6, IEC 62368-3, HD 60364-1, EN 61558-1, EN 50491-6-1:2014, HD 60364-4-41:2017, EN 50174-1:2018, IEC 60364-4-41:2005, EN 50173-3:2018, EN 50173-1:2018, IEC 62368-1:2014, IEC 60079-0:2004, IEC 61534, EN 50085-1, EN 50600-2-5, EN 61784-3, IEC 60364, EN 50173-5, IEC 61643, IEC 60079-17, IEC 60364-4-44, EN 61918, EN 62949, IEC 61784-5, EN 61386-2X, IEC 60364-1, EN 61784-1, HD 60364-5-534, EN 60079-17, EN 61386-1, EN 61784-5, EN 62305-4, EN 50173-2, IEC 61784-1, IEC 62305-4, IEC 60364-5-53, EN 62368-1, HD 60364-4-443, IEC 60332-1-2, IEC 60079-14, EN 61784-3-1, IEC 61537
Informative References(Provided for Information)EN 60512-5-2, EN 50083, EN 50700, EN 61158-2, IEC 61140, HD 60364-5-54, EN 50600-2, EN 50117-4-1, HD 60364-5-52, EN 60512-99-001, EN 60950, IEC 62305-2, EN 62305-2, EN 62305-3, EN 60728, IEC 60950, EN 60512-9-3, CLC/TR 50600-99-1, EN 61140, IEC 60364-5-54, CLC/TR 50174-99-1, IEC 60050-195:1998, IEC 60050-826:2004, ITU-T K.66, EN 60670, CLC/TS 61643-22, IEC 61158-2
ReplacesBS EN 50174-2:2009+A2:2014
International RelationshipsEN 50174-2:2018
Draft Superseded By17/30361391 DC
DescriptorsFibre optic cables, Telecommunication, Low-voltage installations, Buildings, Communication equipment, Telecommunication systems, Installation, Protected electrical equipment, Communication networks, Planning, Data processing, Electrical installations, Maintenance, Computer networks, Electric cables, Communication cables, Information exchange
ICS33.040.50
35.110
91.140.50
Title in FrenchTechnologies de l'information. Installation de câblages Planification et pratiques d'installation à l'intérieur des bâtiments
Title in GermanInformationstechnik. Installation von Kommunikationsverkabelung Installationsplanung und Installationspraktiken in Gebäuden
CommitteeTCT/7
ISBN978 0 580 98719 9
PublisherBSI
FormatA4
DeliveryYes
Pages110
File Size3.108 MB
Price£292.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Customers who bought this product also bought