BS EN 13611:2019 - Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements

BS EN 13611:2019

Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements

Status : Current, Under review   Published : April 2019

Format
PDF

Format
HARDCOPY



This European Standard specifies the general safety, design, construction, and performance requirements and testing of safety, control or regulating devices (hereafter referred to as controls) for burners and appliances burning one or more gaseous fuels or liquid fuels. This European Standard is applicable to controls with declared maximum inlet pressure up to and including 500 kPa and of nominal connection sizes up to and including DN 250. This European standard specifies general product requirements for the following controls: — automatic shut-off valves; — automatic burner control systems; — flame supervision devices; — gas/air ratio controls; — pressure regulators; — manual taps; — mechanical thermostats; — multifunctional controls; — pressure sensing devices; — valve proving systems; — automatic vent valves. This European standard applies for control functions that are not covered by a specific control standard for burners and appliances burning one or more gaseous fuels or liquid fuels. This European Standard applies also for safety accessories and pressure accessories with a product of the maximum allowable pressure PS and the volume V of less than 600 000 kPa · dm3 (6 000 bar · L) or with a product of PS and DN of less than 300 000 kPa (3 000 bar). This European Standard applies for AC and DC supplied controls (for controls supplied by stand-alone battery system, battery systems for mobile applications or systems which are intended to be connected to DC supply networks controls see Annex I). This European Standard is applicable to reset functions used for reset from lockout, e.g. due to ignition failure or temperature cut-out in burners and appliances (see Annex M). This European Standard establishes methodologies for the determination of a Safety Integrity Level (SIL) and the determination of a Performance Level (PL) (see Annex J, Annex K and Annex L). This European Standard gives guidelines for environmental aspects (see Annex N). This European Standard does not apply to mechanical controls for use with liquid fuels. The protection against environmental impact in open air (i.e. capable of withstanding UV radiation, wind, rain, snow, dirt deposits, condensation, ice and hoar frost (see IEV 441-11-05:2005), earthquake and external fire) is not covered by this standard. This European Standard should be used in conjunction with the specific control standard (see Bibliography).




Standard NumberBS EN 13611:2019
TitleSafety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
StatusCurrent, Under review
Publication Date02 April 2019
Normative References(Required to achieve compliance to this standard)EN 586-2:1994, ASTM B 283/B 283Ma:2016, EN ISO 15613:2004, ASTM A 106/A 106 M:2015, ASTM A 874/A 874M:1998, EN ISO 15607:2003, EN ISO 9606-2:2004, ASTM A 536:1984, EN ISO 15614-2:2005, EN ISO 9606-3:1999, ASTM A 213/A 213Mc:2015, ASTM F 593:2013, EN ISO 15609-1:2004, EN 549:1994, ASTM A 395/A 395M:1999, ASTM A 333/A 333M:2016, EN ISO 15610:2003, ASTM A 312/A 312Ma:2016, ASTM A 269/A 269Ma:2015, ASTM A 420/A 420M:2016, EN ISO 9606-4:1999, ASTM A 193/A 193M:2013, EN ISO 15611:2003, ASTM F 594:2009, ASTM B 584:2014, MSS SP-55:2011, ASTM A 320/A 320Ma:2015, EN 377:1993, ASTM B 85/B 85M:2014, EN 61810-1:2015/AC:2017-07, EN 13555:2014, EN ISO 898-2:2012, EN 1057:2006, EN 10250-4:1999, EN 61508-2:2010, EN 12165:2016, EN ISO 17637:2016, EN 50159:2010, EN 1759-1:2004, EN 60384-16:2005, EN 754-2:2016, EN 10025-1:2004, EN 61508-4:2010, EN 10130:2006, EN 60384-14:2013/AC:2016-04, EN ISO 8434-1:2018, SAE J429:2014, EN 10088-3:2014, EN ISO 15612:2018, EN ISO 13849-1:2015, EN ISO 3506-1:2009, EN 10293:2015, EN 1706:2010, EN 12164:2016, EN 10222-1:2017, SAE J995:2012, EN 10226-2:
Informative References(Provided for Information)SN 29500-1, SN 29500-15:2008-02, SN 29500-9:2005-11, SN 29500-1:2004-01, SN 29500-7, ASTM A 516/A 516M:2010, EN 10083-1:2006, EN 61508-1:2010, EN 1106:2010, ISO/IEC Guide 51:2014, EN 12067-2:2004, EN ISO 3506-2:2009, EN 14459:2015, EN 746-2:2010, ISO 7005-1:2011, EN 88-1:2011+A1:2016, EN 334:2005+A1:2009, EN 12020-2:2016/AC:2017, IEC 60191-1:2007, EN ISO 12100:2010, IEC 60050-441:1984, EN 88-2:2007, EN ISO 3506-3:2009, EN 437:2003+A1:2009, EN 60947-1:2007, EN 161:2011+A3:2013, EN 126:2012, EN 125:2010, EN ISO 23553-1:2014, EN 257:2010, EN 16304:2013, ISO 7005-2:1988, EN 1643:2014, EN 298:2012, IEC 60050-161:1990, EN 60127-1:2006, IEC 60050-161:1990+AMD8:2018, IEC 60050-191:1990, EN 12516-3:2002/AC:2003, EN 1854:2010, EN 16340:2014, SN 29500-2:2004-12, SN 29500-4:2004-03, ISO 7005-3:1988, ASTM A 216/A 216M:2016, SN 29500-3:2004-12, SN 29500-12:2008-02, EN ISO 148-1:2016, SN 29500-3, SN 29500-1 H1:2008-02, SN 29500-11:2007-07, SAE AMS 5355J:2009, SN 29500-2, SN 29500-7:2005-11, ASTM A 352/A 352M:2006, SN 29500-10, ASTM A 513/A 513M:2015, ASTM A 451/A 451M:2014, SN 295
ReplacesBS EN 13611:2015
International RelationshipsEN 13611:2019
Draft Superseded By17/30360051 DC
DescriptorsBurners, Instructions for use, Control equipment, Temperature controllers, Pressure regulators, Pressure equipment, Seals, Control devices, Safety devices, Valves, Safety measures, Type testing, Gases, Controllers, Control systems, Marking, Gas-powered devices
ICS23.060.40
Title in FrenchÉquipements auxiliaires pour brûleurs et appareils utilisant des combustibles gazeux ou liquides. Exigences générales
Title in GermanSicherheits- und Regeleinrichtungen für Brenner und Brennstoffgeräte für gasförmige und/oder flüssige Brennstoffe. Allgemeine Anforderungen
CommitteeGSE/22
ISBN978 0 580 98427 3
PublisherBSI
FormatA4
DeliveryYes
Pages156
File Size2.033 MB
Price£342.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards