ASTM C1553 - 16 - Standard Guide for Drying Behavior of Spent Nuclear Fuel

ASTM C1553 - 16

Standard Guide for Drying Behavior of Spent Nuclear Fuel

Status : Current   Published : July 2016



1.1 This guide discusses three steps in preparing spent nuclear fuel (SNF) for placement in a sealed dry storage system: ( 1) evaluating the needs for drying the SNF after removal from a water storage pool and prior to placement in dry storage, ( 2) drying the SNF, and ( 3) demonstrating that adequate dryness has been achieved.

1.1.1 The guide addresses drying methods and their limitations when applied to the drying of SNF that has been stored in water pools. The guide discusses sources and forms of water that may remain in the SNF, the container, or both after the drying process has been completed. It also discusses the important and potential effects of the drying process and any residual water on fuel integrity and container materials during the dry storage period. The effects of residual water are discussed mechanistically as a function of the container thermal and radiological environment to provide guidance on situations that may require extraordinary drying methods, specialized handling, or other treatments.

1.1.2 The basic issues in drying are: ( 1) to determine how dry the SNF must be in order to prevent problems with fuel retrievability, container pressurization, or container corrosion during storage, handling, and transfer, and ( 2) to demonstrate that adequate dryness has been achieved. Achieving adequate dryness may be straightforward for undamaged commercial fuel but complex for any SNF where cladding damage has occurred prior to or during placement and storage at the spent fuel pools. Challenges in achieving adequate dryness may also result from the presence of sludge, CRUD, and any other hydrated compounds. These may be transferred with the SNF to the storage container and may hold water and resist drying.

1.1.3 Units are given in both SI and non-SI units as is industry standard. In some cases, mathematical equivalents are given in parentheses.

1.2  This standard only discusses SNF drying and does not purport to address all of the handling and safety concerns, if any, associated with the drying process(es). It is the responsibility of the user of this standard to establish appropriate safety and health practices and to meet regulatory requirements prior to and during use of the standard.

Standard NumberASTM C1553 - 16
TitleStandard Guide for Drying Behavior of Spent Nuclear Fuel
Publication Date01 July 2016
Normative References(Required to achieve compliance to this standard)No other standards are normatively referenced
Informative References(Provided for Information)No other standards are informatively referenced
Descriptors Chemisorbed water, Corrosion, Drying, Hydrates, Physisorbed water, Radiolysis, Spent nuclear fuel
File Size293 KB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


The faster, easier way to work with standards

Develop a PAS

Develop a fast-track standardization document in 9-12 months

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version