BS EN 1459-2:2015+A1:2018 Rough-terrain trucks. Safety requirements and verification. Slewing variable-reach trucks

BS EN 1459-2:2015+A1:2018

Rough-terrain trucks. Safety requirements and verification. Slewing variable-reach trucks

Status : Current   Published : September 2015

Format
PDF

Format
HARDCOPY



What is this standard about?

This European Standard specifies the general safety requirements of slewing variable-reach roughterrain trucks (here-after referred to as trucks), consisting of a lower chassis with a slewing upper structure equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g. carriage and fork arms) is typically fitted.

Fork arms are covered by this European Standard and considered to be parts of the truck.

This European Standard deals with all significant hazards, hazardous situations and events relevant to the trucks when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).

This European Standard does not apply to:

— variable-reach rough terrain trucks covered by EN 1459-1 (non-slewing);

— industrial variable-reach trucks (covered by EN ISO 3691-2);

— lorry-mounted variable-reach trucks;

— mobile cranes (covered by EN 13000);

— machines designed primarily for earth moving, such as loaders and dozers, even if their buckets and blades are replaced with forks (see EN 474 series);

— trucks designed primarily with variable length load suspension elements (e.g., chain, ropes) from which the load may swing freely in all directions;

— trucks designed primarily for container handling;

— trucks on tracks;

— attachments (prEN 1459-5). This European Standard does not address hazards linked to: — hybrid power systems;

— gas power system;

— trucks equipped with gasoline engine;

— battery power system;

— tractor specific devices (e.g. PTO);

— tilting or elevating operator position." This European Standard does not address hazards which may occur when: a) handling suspended loads which may swing freely (additional requirements are given in prEN 1459-4); b) using trucks on public roads;

c) operating in potentially explosive atmospheres;

d) operating underground;

e) when towing trailers;

f) fitted with a personnel work platform (additional requirements are given in EN 1459-3).




Standard NumberBS EN 1459-2:2015+A1:2018
TitleRough-terrain trucks. Safety requirements and verification. Slewing variable-reach trucks
StatusCurrent
Publication Date30 September 2015
Normative References(Required to achieve compliance to this standard)EN ISO 5353:1998, ISO/DIS 15818:2014, IEC 60529, ISO 10896-1:2012, EN ISO 3471:2008, ISO 22915-24:2015, EN ISO 3449:2008, ISO 11862:1993, ISO 12509:2004, EN 842:1996+A1:2008, ISO 12508:1994, ISO 3795:1989, EN 12053:2001+A1:2008 (07/08), ISO 6011:2003, EN ISO 3411:2007, ISO 4414:2010, ISO 6016:2008, ISO 3449:2005, EN ISO 13732-1:2008 (ISO 13732-1:2006)AS, EN ISO 13849-1:2008, EN ISO 7096:2008, EN ISO 2867:2011, EN ISO 13850:2008, EN 1175-2:1998+A1:2010, ISO 10263-3:2009, ISO 6682:1986, ISO 9533:2010, EN ISO 2860:2008, ISO 21507:2010, ISO 2860:1992, ISO 7096:2000, IEC 62061:2005, EN 13309:2010, ISO 13850:2006, EN ISO 4414:2010, ISO 3411:2007, ISO 12100:2010, ISO 13732-1:2006, EN ISO 3164:2013, ISO 13849-1:2006, EN ISO 6683:2008, ISO 5006:2006, EN ISO 11688-1:2009, EN 15830:2012, ISO 10532:1995, IEC 61310-1:1995, ISO/TR 11688-1:1995
International RelationshipsEN 1459-2:2015+A1:2018
Amended ByAmendment, October 2018
Draft Superseded By17/30351902 DC
DescriptorsTesting conditions, Type testing, Pipework systems, Power transmission systems, Occupational safety, Instructions for use, Symbols, Load-supporting devices, Formulae (mathematics), Performance testing, High-lift trucks, Vehicle components, Verification, Mechanical components, Mechanical testing, Transportation safety, Electrical equipment, Protective cabs, Handbooks, Fork trucks, Lifting equipment, Industrial accidents, Dynamic testing, Test equipment, Stability, Working conditions (physical), Roll-over protective structures, Materials handling equipment, Industrial trucks, Marking, Reach trucks, Materials handling components, Hydraulic equipment, Control devices, Environment (working), Hazards, Equipment safety
ICS53.060
Title in FrenchChariots tout-terrain. Prescriptions de sécurité et vérification Chariots à portée variable rotatifs
Title in GermanGeländegängige Stapler. Sicherheitstechnische Anforderungen und Verifizierung Schwenkbare Stapler mit veränderlicher Reichweite
CommitteeMHE/7
ISBN978 0 580 96475 6
PublisherBSI
FormatA4
DeliveryYes
Pages70
File Size1.595 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version