BS EN 1090-3:2019 Execution of steel structures and aluminium structures. Technical requirements for aluminium structures

BS EN 1090-3:2019

Execution of steel structures and aluminium structures. Technical requirements for aluminium structures

Status : Current   Published : April 2019

Format
PDF

Format
HARDCOPY



What is this standard about?

This document specifies requirements for the execution of aluminium structural components and structures made from:

a) rolled sheet, strip and plate;

b) extrusions;

c) cold drawn rod, bar and tube;

d) forgings;

e) castings.

It covers components made of constituent products with thickness not less than 0,6 mm for welded components not less than 1,5 mm.

For components made from cold formed profiled sheeting that are within the scope of EN 1090-5, the requirements of EN 1090-5 take precedence over corresponding requirements in this document.

This document applies to structures designed according to the relevant parts of EN 1999. If this document is used for structures designed according to other design rules or used for other alloys and tempers not covered by EN 1999, a judgement of the reliability elements in these design rules is intended to be made.

This document specifies requirements for surface preparation prior to application of a protective treatment, and gives guidelines for application for such treatment in an informative annex.

This document gives options for specifying requirements to match project specific requirements.

This document is also applicable to temporary aluminium structures.




Standard NumberBS EN 1090-3:2019
TitleExecution of steel structures and aluminium structures. Technical requirements for aluminium structures
StatusCurrent
Publication Date15 April 2019
Normative References(Required to achieve compliance to this standard)EN ISO 3834-4, EN ISO 3506-2, EN 1999-1-2, EN 14399-7, EN ISO 14731, EN ISO 898-1, EN 1559-1, EN 573-2, EN 15088, EN ISO 25239-4, EN ISO 3452-1, EN 485-1, EN 754-5, EN ISO 14732, EN 14399-3, EN 586-3, EN 573-1, EN 1337-8, EN 1706, EN 1337-4, ISO 7976-1, EN ISO 7049, EN 755-4, EN 754-7, EN ISO 7091, EN 755-9, EN ISO 17637, EN 1011-4, EN 1337-11, EN ISO 7094, ISO 4463-1, ISO 17123-4, EN 755-1, EN ISO 14555, EN ISO 7093-1, EN 10204, EN ISO 7089, EN 28839, EN 1999-1-3, EN 14399-10, ISO 17123-7, ISO 10509, EN ISO 7046-2, EN 1999-1-5, EN ISO 7093-2, EN 485-3, EN 1999-1-1, EN ISO 6520-1:2007, EN 755-6, EN 754-8, EN ISO 1481, EN ISO 13920, EN ISO 15614-2, EN ISO 4762, EN ISO 4016, EN ISO 898-2, EN ISO 17639, EN 754-1, EN 1301-1, EN ISO 4063, EN ISO 15609-1, EN ISO 15480, EN 1090-2, EN ISO 15613, EN ISO 1479, EN 1337-5, ISO 17123-1, EN ISO 25239-2, EN ISO 17635, EN 14399-4, EN ISO 10642, EN 12020-1, EN ISO 3834-2, EN 1559-4, EN 1337-6, EN ISO 2009, EN 14399-2, EN ISO 4288, EN ISO 15612, EN 14399-5, ISO 17123-3, EN 1999-1-4, EN 485-4, EN ISO 10042:2018, EN ISO 9013 (ISO 9013:2017) AS, EN ISO 17659, EN 5
Informative References(Provided for Information)EN ISO 15978, EN ISO 9000, EN ISO 7719, EN ISO 15977, EN ISO/IEC 17024, EN ISO 7040, EN ISO 15481, EN 12487, EN ISO 17663, EN 12206-1, EN ISO 15981, EN ISO 2320, EN ISO 2553, EN ISO 7599, EN ISO 10512, EN ISO 10513, EN ISO 15974, EN 1396, EN ISO/IEC 17020, EN ISO 10511, EN 1090-5, EN ISO 15973, EN ISO 7042, CEN ISO/TR 3834-6
ReplacesBS EN 1090-3:2008
International RelationshipsEN 1090-3:2019
Draft Superseded By17/30348949 DC
DescriptorsBuildings, Welded joints, Metalworking, Erecting (construction operation), Aluminium, Quality control, Approval testing, Construction operations, Structures, Welding, Adhesive-bonded joints, Inspection, Tolerances (measurement), Fasteners, Purchasing, Corrosion protection, Metal sections, Surface treatment, Grades (quality), Structural design, Structural systems
ICS77.150.10
91.080.13
91.080.17
Title in FrenchExécution des structures en acier et des structures en aluminium Exigences techniques pour l'exécution des structures en aluminium
Title in GermanAusführung von Stahltragwerken und Aluminiumtragwerken Technische Anforderungen an Aluminiumtragwerke
CommitteeB/525/9
ISBN978 0 580 95871 7
PublisherBSI
FormatA4
DeliveryYes
Pages130
File Size3.214 MB
Price£314.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought

  • BS EN 1090-2:2018
    Execution of steel structures and aluminium structures Technical requirements for steel structures
  • BS EN ISO 14731:2019
    Welding coordination. Tasks and responsibilities
  • BS EN 1090-5:2017
    Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications