BS ISO 11515:2013+A1:2018 Gas cylinders. Refillable composite reinforced tubes of water capacity between 450 L and 3000 L. Design, construction and testing

BS ISO 11515:2013+A1:2018

Gas cylinders. Refillable composite reinforced tubes of water capacity between 450 L and 3000 L. Design, construction and testing

Status : Current, Under review   Published : August 2013

Format
PDF

Format
HARDCOPY



What is this standard about?

This International Standard specifies minimum requirements for the design, construction and performance testing of composite reinforced tubes between 450 l and 3 000 l water capacity, for transport, storage and use of compressed or liquefied gases with test pressures up to and including 1600 bar with a design life of at least 15 years and less than or equal to 30 years. The expected service temperatures are between −40 °C and +65 °C.

The tubes defined are one of three types:

Type 2: a hoop wrapped tube with a load sharing metal liner and composite reinforcement on the cylindrical portion only.

Type 3: a fully wrapped tube with a load sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends.

Type 4: a fully wrapped tube with a non-load sharing liner and composite reinforcement on both the cylindrical portion and the dome ends.

The Type 4 tubes manufactured and tested to this International Standard are not intended to contain toxic, oxidizing or corrosive gases.

This International Standard is limited to tubes with composite reinforcement of carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix.

Composite tubes can be used alone or in batteries to equip trailers or skids (ISO modules) or multiple element gas containers (MEGC) for the transportation and distribution of gases. This International Standard does not include consideration of any additional stresses that can occur during service or transport, (e.g. torsional / bending stresses). However it is important that the stresses associated with mounting the tube are considered by the assembly manufacturer and the tube manufacturer.




Standard NumberBS ISO 11515:2013+A1:2018
TitleGas cylinders. Refillable composite reinforced tubes of water capacity between 450 L and 3000 L. Design, construction and testing
StatusCurrent, Under review
Publication Date31 August 2013
Normative References(Required to achieve compliance to this standard)ASTM D1308, ISO 9712, ASTM D3170, ASTM D7269, ISO 6506-1, ISO 527-1, ISO 7866, ASTM D2794, ISO 527-2, ISO 11120, ASTM D 522-93a, ISO 7225, ISO 10618, ISO 11114-1, ISO 6508-1, ISO 13341, ISO 11114-2, ISO 6892-1, BS EN ISO 13769:2018, ISO 13769:2018, BS EN ISO 9809-3:2019, BS EN ISO 9809-2:2019, ISO 9809-2:2019, ISO 4624, BS EN ISO 9809-1:2019, ISO 3341, ISO 306, ISO 9809-1:2019, ISO 9227:2012, ISO 9809-3:2019
Informative References(Provided for Information)ISO 11439
International RelationshipsISO 11515:2013/Amd 1:2018,ISO 11515:2013/Amd.1:2018
Amended ByAmendment, January 2019
Draft Superseded By18/30346225 DC
DescriptorsVerification, Pressure vessels, Filling, Repair, Inspection, Transportable, Visual inspection (testing), Composite materials, Gas cylinders, Defects, Liquefied petroleum gas
ICS23.020.30
23.020.35
Title in FrenchBouteilles à gaz. Bouteilles tubulaires en composite renforcé rechargeables d’une capacité de 450 L à 3000 L. Conception, construction et essais
CommitteePVE/3/3
ISBN978 0 580 95232 6
PublisherBSI
FormatA4
DeliveryYes
Pages50
File Size3.478 MB
Price£240.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world