BS EN ISO 12215-5:2018 Small craft. Hull construction and scantlings. Design pressures for monohulls, design stresses, scantlings determination

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN ISO 12215-5:2018

Small craft. Hull construction and scantlings. Design pressures for monohulls, design stresses, scantlings determination

Status : Withdrawn   Published : October 2018 Replaced By : BS EN ISO 12215-5:2019

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


What is this standard about?

This part of ISO 12215 applies to the determination of design pressures and stresses, and to the determination of the scantlings, including internal structural members of monohull small craft constructed from fibre-reinforced plastics, aluminium or steel alloys, glued wood or other suitable boat building material, with a length of hull, LH, in accordance with ISO 8666, between 2,5 m and 24 m. It only applies to boats in the intact condition.

It only applies to craft with a maximum speed u 50 knots in mLDC conditions.

The assessment shall generally include all parts of the craft that are assumed watertight or weathertight when assessing stability, freeboard and buoyancy in accordance with ISO 12217 and are essential to the safety of the craft and of persons on board.

For the complete scantlings of the craft, this part of ISO 12215 is used in conjunction with Part 6, for details, Part 7 for multihulls, Part 8 for rudders and Part 9 for appendages and rig attachment.

The scantling determination of windows, portlights, deadlights, hatches and doors, is in accordance with ISO 12216. The structure supporting these elements is in accordance with this part of ISO 12215.

NOTE 1 Scantlings derived from this part of ISO 12215 are primarily intended to apply to recreational craft including recreational charter vessels and may not be suitable for performance racing craft.

NOTE 2 This part of ISO 12215 is based on the assumption that scantlings are governed solely by local loads.

NOTE 3 The scantling requirements of this part of ISO 12215 are considered to correspond to the minimum strength requirements of motor and sailing craft which are operated in a safe and responsible manner, having due cognisance of the prevailing conditions.

Pressures and stresses are normally expressed in pascals, kilopascals or megapascals. For the purposes of a better understanding for the users of this part of ISO 12215, the pressures are expressed in kilonewtons per square metre (1kN/m2 = 1kPa) and stresses or elastic moduli are expressed in newtons per square millimetre (1 N/mm2 = 1 MPa).




Standard NumberBS EN ISO 12215-5:2018
TitleSmall craft. Hull construction and scantlings. Design pressures for monohulls, design stresses, scantlings determination
StatusWithdrawn
Publication Date24 October 2018
Withdrawn Date02 July 2019
Cross ReferencesISO 8666:2016, ISO 12217-2:2015, ISO 12215-9:2012, ISO 8666:2002, ISO 12217-1:2015, ISO 12217-3:2015, ISO 844, ISO 12215-7, ISO 1922, ISO 845, ISO 12215-9, ISO 12215-6, ISO 12215-3, ISO 12217 (all parts), ISO 527-2, ISO 12216, ISO 178, ASTM C393, ISO 527-1, ASTM C393, ISO 844, ISO 12215-7:—, ISO 527-2, ISO 527-1, ISO 12216, ISO 845, ISO 1922, ISO 178, ISO 12215-3, EN 13195-1, ISO 12215-5: 2008, EN 14195-1, ISO 12215-6:2008, BS EN 408:1995, BS EN 1995-1-1:2004
Replaced ByBS EN ISO 12215-5:2019
International RelationshipsEN ISO 12215-5,EN ISO 12215-5:2019,ISO 12215-5:2008,ISO 12215-5:2008/Amd 1:2014,ISO 12215-5:2019
Draft Superseded By17/30342710 DC18/30367303 DC
DescriptorsHulls, Ships bodies, Superstructures (ships), Structural members, Boats, Water transport engineering, Structural design, Stiffeners, Water transport engineering components, Shipbuilding, Stress, Pressure, Mathematical calculations, Loading, Strength of materials
ICS47.080
Title in FrenchPetits navires — Construction de coques et échantillonnage — Partie 5: Pressions de conception pour monocoques, contraintes de conception, détermination de l'échantillonnage Pressions de conception pour monocoques, contraintes de conception, détermination de l'échantillonnage
Title in GermanKleine Wasserfahrzeuge. Rumpfbauweise und Dimensionierung Entwurfsdrücke für Einrumpffahrzeuge, Entwurfsspannungen, Ermittlung der Dimensionierung
CommitteeGME/33
ISBN978 0 580 94520 5
PublisherBSI
FormatA4
DeliveryYes
Pages120
File Size4.55 MB
Price£282.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world