PD CEN/TS 16980-1:2016 - Photocatalysis. Continuous flow test methods. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials

PD CEN/TS 16980-1:2016

Photocatalysis. Continuous flow test methods. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials

Status : Current, Work in hand   Published : December 2016

Format
PDF

Format
HARDCOPY



This standard describes a method for assessing the performance of photocatalytic inorganic materials contained in cement mortars and/or limes or ceramic-based matrices, paints or materials deposited as thin films or coatings on a variety of substrates for the photocatalytic abatement of nitric oxide in the gas phase. This method is not suitable for the assessment of samples to be applied with flow perpendicular to the surface or flow permeating the surface itself as polymeric and paper filters, honeycomb structures and suchlike. The performance for the photocatalytic sample under test is evaluated by measuring the degradation rate of nitric oxide (NO) using the method described herein. The photocatalytic abatement rate is calculated from the observed rate by eliminating the effects of mass transfer. The intrinsic photocatalytic abatement rate is an intrinsic property of the material tested and makes it possible to distinguish the photocatalytic activities of various products with an absolute scale defined with physical and engineering meaning. For the measurements and calculations described in this standard the concentration of nitrogen oxides (NOx) is defined as the stoichiometric sum of nitric oxide (NO) and nitrogen dioxide (NO2). Safety statement Persons using this document should be familiar with the normal laboratory practice, if applicable. This document cannot address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. Environmental statement It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to better alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard will take care to carry out an appropriate disposal of the wastes, according to local regulation.




Standard NumberPD CEN/TS 16980-1:2016
TitlePhotocatalysis. Continuous flow test methods. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
StatusCurrent, Work in hand
Publication Date31 December 2016
Normative References(Required to achieve compliance to this standard)ISO 7996:1985, CEN/TS 16599:2014, EN ISO 9169, ISO 9169
Informative References(Provided for Information)UNI 11484:2013, ENV 13005:1999, UNI 10878, EN ISO/IEC 17043:2010
International RelationshipsCEN/TS 16980-1:2016
DescriptorsRadiometry, Lighting systems, Test equipment, Composite materials, Radiometers, Testing conditions
ICS25.220.20
Title in FrenchPhotocatalyse. Méthodes d'essai en flux continu. Détermination de la dégradation du monoxyde d'azote (NO) dans l'air par des matériaux photocatalytiques
Title in GermanPhotokatalyse. Prüfverfahren mit kontinuierlichem Durchfluss. Bestimmung des Abbaus von Stickstoffmonoxid (NO) aus der Luft durch photokatalytische Werkstoffe
CommitteeRPI/13
ISBN978 0 580 94089 7
PublisherBSI
FormatA4
DeliveryYes
Pages28
File Size2.173 MB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards


Develop a PAS

Develop a fast-track standardization document in 9-12 months