BS EN 1601:2017, BS 2000-408:2017 - Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID)

BS EN 1601:2017, BS 2000-408:2017

Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID)

Status : Current   Published : September 2017

Format
PDF

Format
HARDCOPY



This European Standard specifies a gas chromatographic method for the quantitative determination, in unleaded petrol having a final boiling point not greater than 220 °C, of individual organic oxygenate compounds in the range 0,17 % (m/m) to 15 % (m/m) in a direct analysis (without dilution), and total organically bound oxygen up to 3,9 % (m/m). For samples for which one of the oxygenate compounds content is higher than 15 % (m/m), a procedure with a dilution of the sample before the analysis is given. NOTE 1 The conversion from percent mass to percent volume is done using the calculation mentioned in 8.3 and 9.5.3. NOTE 2 Precision data are not available for an oxygenate compound content higher than 15 % (m/m); see Introduction. NOTE 3 For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction, µ, respectively the volume fraction, ?. WARNING - The use of this European Standard can involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this European Standard to take appropriate measures to ensure the safety and health of personnel prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.




Standard NumberBS EN 1601:2017, BS 2000-408:2017
TitleLiquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID)
StatusCurrent
Publication Date14 September 2017
Normative References(Required to achieve compliance to this standard)EN ISO 3675, ISO 3170:2004, EN ISO 3838:2004, EN ISO 3170:2004, ISO 12185:1996, EN ISO 3171 (ISO 3171:1988 Adopted), ISO 3838:2004, ISO 3171:1988, EN ISO 12185 (ISO 12185:1996 AS), ISO 3675:1998
Informative References(Provided for Information)ISO 4259:2006, EN 228:2012, EN ISO 4259:2006
ReplacesBS EN 1601:2014, BS 2000-408:2014
International RelationshipsEN 1601:2017
Draft Superseded By16/30339201 DC
DescriptorsDetermination of content, Reproducibility, Liquid fuels, Petroleum products, Fuels, Mathematical calculations, Calibration, Identification methods, Density, Specimen preparation, Petroleum, Gasoline, Oxygen, Chemical analysis and testing, Gas chromatography
ICS75.160.20
Title in FrenchProduits pétroliers liquides. Détermination des composés oxygénés organiques et de la teneur totale en oxygène organiquement lié dans l'essence sans plomb. Méthode par chromatographie en phase gazeuse (O-FID)
Title in GermanFlüssige Mineralölerzeugnisse. Bestimmung sauerstoffhaltiger organischer Verbindungen und des Gesamtgehalts an organisch gebundenem Sauerstoff in unverbleitem Ottokraftstoff. Methode mittels Gaschromatographie (O-FID)
CommitteePTI/13
ISBN978 0 580 93705 7
PublisherBSI
FormatA4
DeliveryYes
Pages24
File Size694 KB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards