Explosive atmospheres. Electrical installations design, selection and erection

BS EN 60079-14:2014

Explosive atmospheres. Electrical installations design, selection and erection

Status : Current, Work in hand   Published : June 2014

Price
£328.00
Member Price
£164.00
Become a member and SAVE 50%
on British Standards. Click to learn more
Format
PDF

Format
HARDCOPY




BS EN 60079-14:2014 is also available with tracked-changes. To learn more and buy, click HERE.  

What is this standard about?

This part of the IEC 60079 series contains the specific requirements for the design, selection, erection and initial inspection of electrical installations in, or associated with, explosive atmospheres.

Where the equipment is required to meet other environmental conditions, for example, protection against ingress of water and resistance to corrosion, additional protection requirements may be necessary.

This standard applies to all electrical equipment including fixed, portable, transportable and personal, and installations, permanent or temporary.

Contents 
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Selection of equipment
6 Protection from dangerous (incendive) sparking
7 Electrical protection
8 Switch-off and electrical isolatio
9 Cables and wiring systems
10 Cables entry systems and blanking elements
12 Luminaires
13 Electric heating systems
14 Additional requirements for type of protection “d” – Flameproof enclosures
15 Additional requirements for type of protection “e” – Increased safety
16 Additional requirements for types of protection “I” – Intrinsic safety
17 Additional requirements for pressurized enclosures
18 Additional requirements for type of protection “n”
19 Additional requirements for type of protection “o” – Oil immersion
20 Additional requirements for type of protection “q” – Powder filling
21 Additional requirements for type of protection “m” – Encapsulation
22 Additional requirements for type of protection “op” – Optical radiation
23 Additional requirements type of protection “t” – Protection by enclosure
24 Annexes
25 Bibliography 

BS EN 60079-14:2014 replaces BS EN 60079-14:2008.




Standard NumberBS EN 60079-14:2014
TitleExplosive atmospheres. Electrical installations design, selection and erection
StatusCurrent, Work in hand
Publication Date30 June 2014
Normative References(Required to achieve compliance to this standard)EN 60079-13:2017, IEC 60079-13:2017, IEC 60079-0, EN 60079-17, IEC 60079-10-2, EN 61010-1, IEC 61010-1, IEC 60060-1, IEC 60079-26, IEC 60079-19, IEC 60079-11, EN 61558-2-6, IEC 60079-29-4, IEC 60034-1, IEC 60079-30-1, IEC 60364-4-41:2005, EN 60079-0, EN 60079-11, EN 60034-1, IEC 60332-1-2, IEC 60243-1, EN 60950, IEC 61558-2-6, IEC 60079-29-1, EN 60079-10-1, IEC 60950, EN 60243-1, EN 60079-29-1, IEC 60079-10-1, EN 60079-30-1, IEC 61285, EN 60332-1-2, IEC 60079-6, EN 60079-7, IEC 60079, EN 60079-18, EN 60079-29-4, IEC 60079-18, IEC 60079-7, EN 60079-1, IEC 60364, EN 60079-19, IEC 62305-3:2010, EN 60079-10-2, EN 62305-3:2011, HD 60364, IEC 60079-17, IEC 60079-15, HD 60364-4-41:2007+corr. July:2007, EN 60079, EN 60079-28, EN 60079-15, EN 61285, EN 60060-1, EN 60079-6, HD 60364-4-41:2007, EN 60079-26, IEC 60079-28, IEC/TR 60079-16
Informative References(Provided for Information)EN ISO 10807, CLC/TS 60034-17, CLC/TR 50427, EN 61439-1, IEC/TS 60034-17, EN 61241, IEC 60614-2-1, CLC/TS 60034-25, IEC 61439-1, EN 61008-1, IEC 61241-11, IEC 60079-30-2, EN 61010-1, EN 60079-31, IEC 60050, IEC 61024-1, IEC/TS 60034-25, EN 60079-5, IEC 61010-1, IEC 60742, IEC 60755, CENELEC/EN 50272-2, EN 60079-30-2:2017, IEC 60079-2, IEC 60332-2-2, EN 61241-4, EN 61241-1, IEC 61241-2-1, EN 60079-2, IEC 60034-5, IEC 60614-2-5, IEC 60079-5, EN 60742, IEC 60079-31, IEC 61241-4, IEC 60529, IEC 60079-29-2, EN 61241-11, IEC 60332-3, EN 60332-3, ISO 10807, EN 60079-29-2, CENELEC/TR 50404, IEC 61008-1, IEC 61241, EN 60034-5, IEC 61241-1, EN 60529, EN 60332-2-2
ReplacesBS EN 60335-2-36:2000, IEC 60335-2-36:2000, BS EN 61241-0:2006, BS EN 60079-17:2007, BS EN 60079-2:2004, BS EN 50020:2002, BS EN 60079-0:2006, BS EN 60079-14:2008
International RelationshipsEN 60079-14:2014/AC:2016,IEC 60079-14:2013,IEC 60079-14:2013/COR1:2016
Amended ByCorrigendum, April 2016
DescriptorsZone 0 hazardous areas, Electric cables, Earthing, Protected electrical equipment, Overload protection, Type p protected electrical equipment, Electric conduits, Zone 1 hazardous areas, Classification systems, Zone 2 hazardous areas, Rated voltage, Circuits, Temperature, Hazardous areas classification (for electrical equipment), Type d protected electrical equipment, Verification, Electrical installations, Design, Electrical safety, Explosive atmospheres, Type e protected electrical equipment, Marking, Electric wiring systems, Electrical equipment
ICS13.230
29.260.20
Title in FrenchAtmosphères explosives. Conception, sélection et construction des installations électriques
Title in GermanExplosionsgefährdete Bereiche. Projektierung, Auswahl und Errichtung elektrischer Anlagen
CommitteeEXL/31/3
ISBN978 0 580 93501 5
PublisherBSI
FormatA4
DeliveryYes
Pages146
File Size3.967 MB
Price£328.00


Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Collaborate, Innovate, Accelerate.


Customers who bought this product also bought

  • BS EN 60079-17:2014
    Explosive atmospheres Electrical installations inspection and maintenance
  • BS EN 60079-10-1:2015
    Explosive atmospheres Classification of areas. Explosive gas atmospheres
  • BS EN 60079-10-2:2015
    Explosive atmospheres Classification of areas. Explosive dust atmospheres
  • BS EN ISO 80079-37:2016
    Explosive atmospheres Non-electrical equipment for explosive atmospheres. Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k''