BS EN 13492:2018 - Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

BS EN 13492:2018

Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

Status : Current   Published : April 2018

Format
PDF

Format
HARDCOPY



This European Standard specifies the characteristics of geosynthetic barriers, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers and separation layer in the construction of liquid waste disposal sites, and in the construction of transfer stations or secondary containment for the storage of liquid waste on a waste disposal site only and the appropriate test methods to determine these characteristics. The intended use of these products is to control the leakage of fluids through the construction. This European Standard is not applicable to geotextiles or geotextile-related products as defined in EN ISO 10318-1. This European Standard provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard including factory production control procedures. This European Standard defines characteristics to be considered with regard to the presentation of performance. NOTE Where potable water is or can be in direct contact with the product, other relevant standards, requirements and/or regulations can be considered for the design.




Standard NumberBS EN 13492:2018
TitleGeosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
StatusCurrent
Publication Date19 April 2018
Normative References(Required to achieve compliance to this standard)EN 12447:2001, EN ISO 13438:2004, EN 1427:2015, ISO 34-1:2015, EN ISO 10319:2015, EN 13251:2016, ISO 12236:2006, EN 1849-1:1999, EN 1849-2:2009, EN 16416:2013, EN ISO 1183-2:2004, EN ISO 9863-1 (ISO 9863-1:2016) AS, CEN/TS 14416:2014, EN 13255:2016, EN 14150:2006, EN 13257:2016, ISO 9864:2005, EN 14151:2010, EN ISO 12957-1:2005, ASTM D7409, EN ISO 527-4:1997, ASTM D4603, ASTM D696, ASTM D5890, EN ISO 9864:2005, EN ISO 12957-2:2005, ASTM D6141, EN ISO 3696:1995, EN 1109:2013, ISO 3696:1987, EN 495-5:2013, EN 12311-2:2013, ISO 9863-1:2016, ISO 1183-2:2004, EN 13253:2016, ISO 527-4:1997, ISO 12957-2:2005, EN 13252:2016, ISO 11357-6:2008, CEN/TS 14418:2014, ISO 1183-3:1999, EN 13254:2016, EN ISO 12236:2006, ISO 11465:1993, EN 12311-1:1999, ISO 13438:2004, EN 14576:2005, EN ISO 1183-3:1999, ISO 527-1:2012, ISO 527-3:1995 (R10), EN 12310-1:1999, EN ISO 11357-6:2013, EN 13265:2016, EN ISO 1183-1:2012, EN ISO 527-1:2012, EN 1110:2010, EN ISO 10318-1:2015, EN 1296:2000, EN ISO 527-3 (ISO 527-3:1995 AS), EN 14575:2005, EN 12225:2000, EN 12226:2012, EN 13256:2016, EN 14196:2016, ISO
Informative References(Provided for Information)No other standards are informatively referenced
ReplacesBS EN 13492:2013
International RelationshipsEN 13492:2018
Draft Superseded By16/30338126 DC
DescriptorsClay, Waste disposal, Performance, Waste disposal works, Conformity, Sealing materials, Geotextiles, Waste disposal facilities, Solids, Polymers, Storage facilities, Waterproof materials, Type testing, Performance testing, Waste disposal engineering, Geosynthetic barriers, Bituminous products, Geosynthetic materials
ICS59.080.70
91.100.50
Title in FrenchGéomembranes, gésosynthétiques bentonitiques. Caractéristiques requises pour l'utilisation dans la construction des sites d'évacuation de résidus liquides, des stations de transfert ou enceintes de confinement secondaires
Title in GermanGeosynthetische Dichtungsbahnen. Eigenschaften, die für die Anwendung beim Bau von Deponien, Zwischenlagern oder Auffangbecken für flüssige Abfallstoffe erforderlich sind
CommitteeB/553
ISBN978 0 580 93482 7
PublisherBSI
FormatA4
DeliveryYes
Pages66
File Size1.306 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards