BS EN 16994:2018 - Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)

BS EN 16994:2018

Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)

Status : Current   Published : March 2018

Format
PDF

Format
HARDCOPY



This document specifies the characteristics of clay geosynthetic barriers (GBR-C) as well as multicomponent geosynthetic clay barriers (e.g. a GBR-C with a polymeric or bituminous geosynthetic barrier attached to it), when used as fluid barriers and separation layer in the construction of underground structures (other than tunnels and associated structures), and the appropriate test methods to determine these characteristics. If in a multicomponent GBR-C, the GBR-P or GBR-B is the predominant hydraulic barrier then the appropriate standard should be used. The intended use of these products is to control the leakage of fluid through the construction wall. This document is not applicable to geotextiles or geotextile-related products as defined in EN ISO 10318 1. This document provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard including factory production control procedures. This document defines characteristics to be considered with regard to the presentation of performance. This document does not cover applications where the geosynthetic barrier is to be in contact with water that has been treated for human consumption. NOTE Where potable water is or can be in direct contact with the product, other relevant standards, requirements and/or regulations can be considered for the design.




Standard NumberBS EN 16994:2018
TitleClay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
StatusCurrent
Publication Date23 March 2018
Normative References(Required to achieve compliance to this standard)ASTM D4603, EN 13250:2016, EN 14415:2004, ISO 11465:1993, EN ISO 10318-1:2015, EN 1849-2:2009, EN 13257:2016, EN 14151:2010, EN 12224:2000, EN ISO 527-3 (ISO 527-3:1995 AS), EN ISO 1133-1:2011, EN 14196:2016, EN 12311-2:2013, EN 13255:2016, EN 14576:2005, EN 13254:2016, EN 13249:2016, CEN/TS 14418:2014, EN ISO 1183-3:1999, ISO 34-1:2015, EN 13251:2016, EN ISO 13438:2004, EN 13252:2016, EN 13265:2016, EN 1296:2000, EN 12226:2012, EN ISO 11357-6:2013, CEN/TS 14417:2014, EN 13253:2016, EN ISO 10319:2015, EN 12225:2000, EN 13256:2016, EN 16416:2013, EN ISO 12236:2006, EN ISO 1183-1:2012, EN ISO 1183-2:2004, EN 14575:2005, ASTM D7409, ASTM D5890
Informative References(Provided for Information)ASTM D5885, ISO 10390, ISO/TS 13434, EN ISO 1133-2, EN 12310-1, EN ISO 11358-1, EN ISO 9001, ASTM D1434, EN 1844, EN ISO 13426-1, ASTM D5596, EN 495-5, EN ISO 6427, EN 13492, EN 13493, prEN 16993, EN 1109, ASTM D696, EN 1849-1, ASTM D6141, ASTM D1603, EN 12311-1, EN 13491, EN 806-1, ASTM D4218, EN 13362, EN ISO 13426-2, EN 13361, EN 15382
International RelationshipsEN 16994:2018
Draft Superseded By16/30338105 DC
DescriptorsGeosynthetic barriers, Clay, Construction materials, Mass, Density measurement, Geosynthetic materials, Moisture measurement, Clay soils
ICS59.080.70
91.100.50
Title in FrenchGeosynthétiques Bentonitiques. Caractéristiques requises pour l'utilisation dans la construction de structures souterraines (hors tunnels et structures associées)
Title in GermanGeosynthetische Tondichtungsbahnen. Eigenschaften, die für die Anwendung beim Bau von Tiefbauwerken (andere als Tunnel und damit verbundene Tiefbauwerke) erforderlich sind
CommitteeB/553
ISBN978 0 580 93475 9
PublisherBSI
FormatA4
DeliveryYes
Pages52
File Size1.351 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months