BS EN ISO 15156-3:2015 - Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

BS EN ISO 15156-3:2015

Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

Status : Superseded, Withdrawn   Published : September 2015 Replaced By : BS EN ISO 15156-3:2020

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001


This part of ISO 15156 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H 2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations.

This part of ISO 15156 addresses the resistance of these materials to damage that can be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC), and galvanically induced hydrogen stress cracking (GHSC).

This part of ISO 15156 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed.

Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions.

This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see ISO 15156‑1:2015, Clause 5.

This part of ISO 15156 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

Table 1
List of equipment

[This table has been removed.]

a

See ISO 15156‑2:2015, A.2.3.2.3 for more information.

b

See ISO 15156‑2:2015, A.2.3.2.1 for more information.

c

Wireline lubricators and lubricator connecting devices are not permitted exclusions.

d

For sucker rod pumps and sucker rods, reference can be made to NACE MR0176.




Standard NumberBS EN ISO 15156-3:2015
TitlePetroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
StatusSuperseded, Withdrawn
Publication Date30 September 2015
Withdrawn Date27 November 2020
Normative References(Required to achieve compliance to this standard)ISO 6507-1, ISO 15156-1:2015, ISO 15156-2:2015, NACE TM0177, ISO 6508-1, ISO 6892-1, NACE CORROSION/97 Paper 58, ASTM E562, ISO 10423, ISO 7539-7, NACE TM0198, EFC 17, ASTM E29, SAE AMS-2430, ISO 11960, NACE CORROSION/95, ASTM A747/A747M
Informative References(Provided for Information)BS HR.3, ASTM A744/A744M, ISO 15510, NACE MR0176, ASTM A182/A182M, ISO 13680, ASTM E384, European Federation of Corrosion Publications No. 16, NACE TM0284, NACE MR0175, ASTM A276, ASTM A213/A213M, ASTM A743/A743M, ASTM E18, ASTM A351/A351M
Replaced ByBS EN ISO 15156-3:2020
ReplacesBS EN ISO 15156-3:2009
International RelationshipsEN ISO 15156-3:2015,ISO 15156-3:2015
Amended ByCorrigendum, August 2016
DescriptorsSteels, Petroleum extraction, Natural gas extraction, Alloys, Hydrogen sulfide, Corrosion-resistant steels, Gas technology, Cracking, Petroleum technology, Environment (working), Metals, Stress corrosion, Hydrogen, Corrosion-resistant materials, Stainless steels
ICS75.180.10
77.060
Title in FrenchIndustries du pétrole et du gaz naturel. Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz. ARC (alliages résistants a la corrosion) et autres alliages résistants à la fissuration
Title in GermanErdöl- und Erdgasindustrie. Werkstoffe für den Einsatz in H2S-haltiger Umgebung bei der Öl- und Gasgewinnung. Hochlegierte Stähle (CRAs) und andere Legierungen
CommitteePSE/17
ISBN978 0 580 92476 7
PublisherBSI
FormatA4
DeliveryYes
Pages96
File Size4.028 MB
Price£280.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months