BS EN ISO 15156-2:2015 - Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant carbon and low alloy steels, and the use of cast irons

BS EN ISO 15156-2:2015

Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant carbon and low alloy steels, and the use of cast irons

Status : Superseded, Withdrawn   Published : September 2015 Replaced By : BS EN ISO 15156-2:2020

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001


This part of ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H 2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations.

This part of ISO 15156 addresses the resistance of these steels to damage that can be caused by sulfide stress-cracking (SSC) and the related phenomena of stress-oriented hydrogen-induced cracking (SOHIC) and soft-zone cracking (SZC).

This part of ISO 15156 also addresses the resistance of these steels to hydrogen-induced cracking (HIC) and its possible development into stepwise cracking (SWC).

This part of ISO 15156 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed.

Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions.

This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see ISO 15156‑1:2015 , Clause 5.

Annex A lists SSC-resistant carbon and low alloy steels, and A.2.4 includes requirements for the use of cast irons.

This part of ISO 15156 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

Table 1
List of equipment

[This table has been removed.]

a

See A.2.3.2.3 for more information.

b

See A.2.3.2.1 for more information.

c

Wireline lubricators and lubricator connecting devices are not permitted exclusions.

d

For sucker rod pumps and sucker rods reference can be made to NACE MR0176 .




Standard NumberBS EN ISO 15156-2:2015
TitlePetroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant carbon and low alloy steels, and the use of cast irons
StatusSuperseded, Withdrawn
Publication Date30 September 2015
Withdrawn Date02 December 2020
Normative References(Required to achieve compliance to this standard)ISO 3183, ISO 6507-1, ISO 15156-3:2015, ISO 15156-1:2015, ANSI/API Spec 5L, NACE TM0177, ISO 6508-1, NACE TM0284, ISO 11960, ISO 10423, ISO 18265, ISO 6892-1, Spec API 5CT, ISO 6506-1, SAE AMS-2430
Informative References(Provided for Information)ASTM E140, ASTM A278/A278M, ASTM A194/A194M, ASTM E384, ASTM A105/A105M, ASTM E10, ASTM A193/A193M, ASTM A48/A48M, ASTM A220/A220M, ASTM A234/A234M, ASTM A395/A395M, ASTM A333/A333M, NACE 2000, ASTM A320/A320M, ASTM A53/A53M, ASTM A524, ASTM A602, NACE MR0175, HSE OTI-95-635, ASTM A536, ASTM A106, ASTM A381, NACE MR0176, ASTM A571/A571M, ISO 3183, ASTM E18
Replaced ByBS EN ISO 15156-2:2020
ReplacesBS EN ISO 15156-2:2009
International RelationshipsEN ISO 15156-2:2015,ISO 15156-2:2015
Amended ByCorrigendum, August 2016
DescriptorsStress corrosion, Gas technology, Corrosion-resistant materials, Fracture, Alloys, Petroleum extraction, Steels, Cast-iron, Petroleum technology, Metals, Unalloyed steels, Hydrogen sulfide, Cracking, Low-alloy steels, Environment (working), Natural gas extraction
ICS75.180.10
Title in FrenchIndustries du pétrole et du gaz naturel. Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz. Aciers au carbone et aciers faiblement allieés résistants à la fissuration, et utilisation de fontes
Title in GermanErdöl- und Erdgasindustrie. Werkstoffe für den Einsatz in H2S-haltiger Umgebung bei der Öl- und Gasgewinnung. Gegen Rissbildung beständige unlegierte und niedriglegierte Stähle und Gusseisen
CommitteePSE/17
ISBN978 0 580 92475 0
PublisherBSI
FormatA4
DeliveryYes
Pages56
File Size2.675 MB
Price£260.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version