BS EN ISO 15493:2003+A1:2017 - Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride)(PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and the system. Metric series

BS EN ISO 15493:2003+A1:2017

Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride)(PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and the system. Metric series

Status : Current   Published : October 2003

Format
PDF

Format
HARDCOPY



This International Standard specifies the characteristics and requirements for components such as pipes, fittings and valves made from one of the following materials:

  • acrylonitrile-butadiene-styrene (ABS);

  • unplasticized poly(vinyl chloride) (PVC-U);

  • chlorinated poly(vinyl chloride) (PVC-C);

intended to be used for thermoplastics piping systems in above-ground industrial applications.

This International Standard is applicable to ABS, PVC-U or PVC-C pipes, fittings, valves and ancillary equipment, to their joints and to joints with components made of other plastics and non-plastics materials, depending on their suitability, intended to be used for the conveyance of liquid and gaseous fluids as well as of solid matter in fluids for industrial applications such as:

  • chemical plants;

  • industrial sewerage engineering;

  • power engineering (cooling and general-purpose water supply);

  • electroplating and pickling plants;

  • the semiconductor industry;

  • agricultural production plants;

  • water treatment.

NOTE 1

Where relevant, national regulations for specific applications (e.g. water treatment) apply.

Other application areas are permitted if the requirements of this International Standard and/or applicable national requirements are fulfilled.

Relevant regulations in respect of fire behaviour and explosion risk are applicable if applications are envisaged for inflammable media.

The components have to withstand the mechanical, thermal and chemical demands to be expected and have to be resistant to the fluids to be conveyed.

Characteristics and requirements which are applicable to all three materials (ABS, PVC-U and PVC-C) are covered by the relevant clauses of this International Standard. Those characteristics and requirements which are dependent on the material are given for each material in the relevant annex (see Table 1).

Table 1
Material-specific annexes

[This table has been removed.]

NOTE 2

Components conforming to any of the product standards listed in the bibliography or to national standards, as applicable, may be used with components conforming to this International Standard provided they conform to the requirements for joint dimensions and to the other relevant requirements of this standard.




Standard NumberBS EN ISO 15493:2003+A1:2017
TitlePlastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride)(PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and the system. Metric series
StatusCurrent
Publication Date08 October 2003
Normative References(Required to achieve compliance to this standard)ISO 11922-1:1997, ISO 580, ISO 1158, ISO 3514:1976, ISO 228-1, ISO 2505-1:1994, ISO 4065, ISO 265-1, ISO 9852, ISO 1183-2, ISO 727-1, ISO 3126, ISO 9853, ISO 9311-1, ISO 3127, ISO 1167-1, ISO 16136, ISO 9080, ISO 2507-2, ISO 16138, ISO 21787, ISO 16135, ISO 16137, ISO 16139, ISO 15853, ISO 2507-1, ISO 12162, ISO/TR 10358, ISO 1043-1, ISO 2505-2:1994, ISO 306, ISO 472, ISO 7-1
Informative References(Provided for Information)ISO 580:1990, ISO 3127:1994, ISO 12092:2000, ISO 4433, ISO 9853:1991, ISO 2505-1:1994, ISO 2505-2:1994, ISO 1167:1996, EN 921, EN 744, ISO 9001, ISO 10241, EN 12107, ISO/TR 16913, ISO 9852:1995, ISO 9393, ISO 15494, ISO 2507-1:1995, ISO 497, ISO 10931, EN 763, EN 802, ISO 2507-2:1995, ISO 4422, EN 727, EN 580, EN 1778, EN 743, ISO 3
International RelationshipsISO 15493:2003/AMD 1:2016,ISO 15493:2003,EN ISO 15493 Amd 1 (01/17) ISO
Amended ByAmendment, February 2017
Draft Superseded By16/30327064 DC
DescriptorsThermoplastic polymers, Pressure pipes, Hydrostatic pressure, Gas pipes, Industrial, Plastic pipelines, Fluorocarbons, Stress, Industrial pipework systems, Pipes, Polyvinylidene fluoride, Diameter, Water, Pipework systems, Pressure, Plastics
ICS23.040.01
Title in FrenchSystèmes de canalisations en matières plastiques pour les applications industrielles. Acrylonitrile-butadiène-styrène(ABS) poly(chlorure de vinyle) non plastifié (PVC-U) et poly(chlorure de vinyle) chloré (PVC-C). Spécifications pour les composants et le système. Série métrique
Title in GermanKunststoff-Rohrleitungssysteme für industrielle Anwendungen. Acrylnitril-Butadien-Styrol (ABS) weichmacherfreies Polyvinylchlorid (PVC-U) und chloriertes Polyvinylchlorid (PVC-C). Anforderungen an Rohrleitungsteile und das Rohrleitungssystem. Metrische Reihen
CommitteePRI/88/2
ISBN978 0 580 90986 3
PublisherBSI
FormatA4
DeliveryYes
Pages74
File Size1.298 MB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version