BS EN 16905-1:2017 - Gas-fired endothermic engine driven heat pumps. Terms and definitions

BS EN 16905-1:2017

Gas-fired endothermic engine driven heat pumps. Terms and definitions

Status : Current, Under review   Published : March 2017

Format
PDF

Format
HARDCOPY



1.1 Scope of FprEN 16905 series This European Standard specifies the requirements, test methods and test conditions for the rating and performance calculation of air conditioners and heat pumps using either air, water or brine as heat transfer media, with gas-fired endothermic engine driven compressors when used for space heating, cooling and refrigeration, hereafter referred to as "GEHP appliance". This European Standard only applies to appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions. This European Standard only applies to appliances under categories I2H, I2E, I2Er, I2R, I2E(S)B, I2L, I2LL, I2ELL, I2E(R)B, I2ESi, I2E(R), I3P, I3B, I3B/P, II2H3+, II2Er3+, II2H3B/P, II2L3B/P, II2E3B/P, II2ELL3B/P, II2L3P, II2H3P, II2E3P and II2Er3P according to EN 437. This European Standard only applies to appliances having: a) gas fired endothermic engines under the control of fully automatic control systems; b) closed system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated; c) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 °C during normal operation; d) where the maximum operating pressure in the: 1) heating water circuit (if installed) does not exceed 6 bar 2) domestic hot water circuit (if installed) does not exceed 10 bar. This European Standard applies to appliances only when used for space heating or space cooling or for refrigeration, with or without heat recovery. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by this European Standard. Packaged units, single split and multisplit systems are covered by this European Standard. Single duct and double duct units are covered by this European Standard. The above appliances can have one or more primary or secondary functions. This European Standard is applicable to appliances that are intended to be type tested. Requirements for appliances that are not type tested would need to be subject to further consideration. In the case of packaged units (consisting of several parts), this European Standard applies only to those designed and supplied as a complete package. NOTE All the symbols given in this text are used regardless of the language used. 1.2 Scope of FprEN 16905-1 This part of FprEN 16905 series specifies the terms and definitions of gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery.




Standard NumberBS EN 16905-1:2017
TitleGas-fired endothermic engine driven heat pumps. Terms and definitions
StatusCurrent, Under review
Publication Date31 March 2017
Normative References(Required to achieve compliance to this standard)No other standards are normatively referenced
Informative References(Provided for Information)EN 14511-1:2018, EN 14511-2:2018, EN 16905-5:2017, EN 437, EN 14825, EN 14511-4:2018, EN 14511-3:2018
International RelationshipsEN 16905-1:2017
Draft Superseded By15/30326263 DC
DescriptorsAir-conditioning systems, Refrigerating plant, Heaters, Heat pumps, Heating equipment, Energy conservation, Space-heating systems
ICS01.040.27
27.080
Title in FrenchPompes à chaleur à moteur endothermique alimenté au gaz. Termes et définitions
Title in GermanGasbefeuerte endothermische Motor-Wärmepumpen. Begriffe
CommitteeGSE/37
ISBN978 0 580 90768 5
PublisherBSI
FormatA4
DeliveryYes
Pages32
File Size529 KB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world