BS EN 14033-4:2019 - Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for running, travelling and working on urban rail

BS EN 14033-4:2019

Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for running, travelling and working on urban rail

Status : Current   Published : February 2019

Format
PDF

Format
HARDCOPY



1.1 General This document deals with the technical requirements to minimize the specific railway hazards of railbound construction and maintenance machines - henceforward referred to as machines, intended for use on urban rail systems. These hazards can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorized representative. The requirements in this standard amend those in EN 14033-1 to ?3 as required for the use of the machine on urban rail systems. Where a machine is designed and intended for use on mainline and urban rail systems, compliance with the most onerous conditions of EN 14033-1 to ?3 and EN 14033-4 will be required. This document does not apply to the following: - requirements for quality of the work or performance of the machine; - machines moving and working whilst not on rails; - specific requirements established by the machine owner and/or operating company for the use of machines, which will be the subject of negotiation between the manufacturer and the Urban Rail Manager. This document does not establish additional requirements for the following: - operation subject to special rules, e.g. potentially explosive atmospheres; - hazards due to natural causes, e.g. earthquake, lightning, flooding; - working methods; - operation in severe working conditions requiring special measures, e.g. in tunnels or cuttings, extreme environmental conditions such as: freezing temperatures, high temperatures, corrosive environments, tropical environments, contaminating environments, strong magnetic fields; - hazards that may occur when a machine is used to handle suspended loads which may swing freely. Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex B. 1.2 Scope of urban rail systems Urban rail systems cover Urban Guided Transport systems (UGT) and might include other rail systems excluded from the scope of the Interoperability Directive 2008/57/EC (Article 1.3 (a) and (b))1. Urban Guided Transport systems (UGT), which cover metro, tram and light rail, are defined as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic. Categories of urban rail systems include: - (I) Metros: UGT systems operated on their own right of way and segregated from general road and pedestrian traffic. They are consequently designed for operations in tunnel, viaducts or on surface level but with physical separation in such a way that inadvertent access is not possible. In different parts of the world, Metro systems are also known as the underground, the subway or the tube. Rail systems with specific construction issues operating on a segregated guideway (e.g. monorail, rack railways) are also treated as Metros as long as they are designated as part of the urban public transport network. - (II) Trams: UGT systems not segregated from general road and pedestrian traffic, which share their right of way with general road and/or pedestrian traffic and are therefore embedded in their relevant national road traffic legislation (highway codes and specific adaptations). - (III) Light Rail: Light Rail is defined as a UGT system operated in parts of the system not segregated from general road and pedestrian traffic, and in parts of the system with segregated right-of-way. The segregation may include some sections of line where inadvertent access is not possible. - (IV) Local rail systems which by national decision complying with Article 1 (3) a) or b) of Directive 2008/57/EC may be excluded from the European Community Rail System.




Standard NumberBS EN 14033-4:2019
TitleRailway applications. Track. Railbound construction and maintenance machines. Technical requirements for running, travelling and working on urban rail
StatusCurrent
Publication Date06 February 2019
Normative References(Required to achieve compliance to this standard)EN 12663-1, EN 14033-1:2017, EN ISO 12100:2010, EN 14033-2:2017, EN 14033-3:2017, ISO 12100:2010
Informative References(Provided for Information)EN 15355, EN 13452-1, EN 13452-2, EN 15227, EN 12663-2, EN 15955-2:2013, EN 15954-2:2013, EN 15954-1:2013, EN 13977:2011, EN 15955-1:2013
International RelationshipsEN 14033-4:2019
Draft Superseded By17/30326148 DC
DescriptorsRailway track, Railway maintenance vehicles, Railway fixed equipment, Occupational safety, Equipment safety
ICS45.120
93.100
Title in FrenchApplications ferroviaires. Voie. Machines de construction et de maintenance empruntant exclusivement les voies ferrées Exigences techniques pour la circulation, le déplacement et le travail sur le réseau ferroviaire urbain
Title in GermanBahnanwendungen. Oberbau. Schienengebundene Bau- und Instandhaltungsmaschinen Technische Anforderungen an Fahrbetrieb, Versetzfahrt und Arbeitseinsatz in Schienennahverkehrssystemen
CommitteeRAE/2
ISBN978 0 580 90731 9
PublisherBSI
FormatA4
DeliveryYes
Pages28
File Size780 KB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world