BS EN ISO 14171:2016 - Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification

BS EN ISO 14171:2016

Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification

Status : Current, Under review   Published : August 2016

Format
PDF

Format
HARDCOPY



This International Standard specifies the requirements for the classification of electrode/flux combinations and weld metal in the as-welded condition and in the post-weld heat-treated condition for submerged arc welding of non-alloy and fine grain steels with minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. One flux can be classified with different solid wire electrodes and tubular cored electrodes. The solid wire electrode is also classified separately based on chemical composition.

This International Standard is a combined specification providing for classification utilizing a system based upon the yield strength and the average impact energy for weld metal of 47 J, or utilizing a system based upon the tensile strength and the average impact energy for weld metal of 27 J.

  1. Paragraphs and tables which carry the suffix letter ԁԠare applicable only to electrode/flux combinations and wire electrodes classified using the system based upon the yield strength and the average impact energy for weld metal of 47 J, in accordance with this International Standard.

  2. Clauses and tables which carry the suffix letter ԂԠare applicable only to electrode/flux combinations and wire electrodes classified using the system based upon the tensile strength and the average impact energy for weld metal of 27 J, in accordance with this International Standard.

  3. Clauses and tables which do not have either the suffix letter ԁԠor the suffix letter ԂԠare applicable to all electrode/flux combinations and wire electrodes classified in accordance with this International Standard.

Fluxes for the single-run and two-run techniques are classified on the basis of the two-run technique.




Standard NumberBS EN ISO 14171:2016
TitleWelding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
StatusCurrent, Under review
Publication Date31 August 2016
Normative References(Required to achieve compliance to this standard)ISO 14344, ISO 80000-1:2009, ISO 15792-1:2000, ISO 14174, ISO 13916:2017, ISO 544, ISO 3690, ISO 15792-2:2000, ISO 6847
Informative References(Provided for Information)No other standards are informatively referenced
ReplacesBS EN ISO 14171:2010
International RelationshipsEN ISO 14171:2016,ISO 14171:2016
Draft Superseded By15/30323235 DC
DescriptorsFiller wire, Fluxes (materials), Submerged arc welding, Elongation, Arc-welding equipment, Welding equipment, Welding electrodes, Manganese steels, Steels, Impact strength, Yield strength, Low-alloy steels, Filler metal, Electrodes, Classification systems, Consumable electrodes, Wires, Unalloyed steels, Chemical composition, Designations, Tensile strength
ICS25.160.20
Title in FrenchProduits consommables pour le soudage. Fils-électrodes pleins, fils-électrodes fourrés et couples fils-flux pour le soudage à l'arc sous flux des aciers non alliés et à grains fins. Classification
Title in GermanSchweißzusätze. Massivdrahtelektroden, Fülldrahtelektroden und Draht-Pulver-Kombinationen zum Unterpulverschweißen von unlegierten Stählen und Feinkornstählen. Einteilung
CommitteeWEE/39
ISBN978 0 580 90104 1
PublisherBSI
FormatA4
DeliveryYes
Pages32
File Size1.9 MB
Price£186.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world