ASTM D7942 - 15 - Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas

Related Standards

ASTM D7942 - 15

Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas

Status : Current   Published : January 2015

Format
PDF

Format
HARDCOPY



1.1 This specification covers a reflectorized thermoplastic based pavement striping material of the class that is applied to the road surface in a molten state by screed/extrusion or ribbon extrusion means. Retroreflectivity of the pavement marking compound is achieved initially by surface application of retroreflective optics at the time of pavement marking application. Upon cooling to normal pavement temperature, the pavement marking material produces an adherent reflectorized stripe of specified thickness and width capable of resisting deformation by traffic. The pavement marking compound includes retroreflective optics (glass beads or composite optics, or both) that are incorporated into the material at the time of manufacture that provide retroreflective properties during the service life of the material.

1.1.1 This specification is limited to:

1.1.1.1 Longitudinal applications in non snow plow areas,

1.1.1.2 Standard (non-profile) pavement marking applications, and

1.1.1.3 Applications on smooth asphalt or concrete surfaces. Asphalt seal coat applications, which use large aggregate resulting in a very rough, open grade finish, are excluded from this specification.

1.1.2 This specification includes:

1.1.2.1 Compositional and physical property requirements of the thermoplastic pavement marking material,

1.1.2.2 Requirements for the optics that are used to reflectorize the thermoplastic pavement marking material after application,

1.1.2.3 Field performance requirements for the installed thermoplastic pavement markings, and

1.1.2.4 Material application requirements.

1.2 The values stated in inch-pounds units are to be regarded as the standard except where noted in the document. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.




Standard NumberASTM D7942 - 15
TitleStandard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas
StatusCurrent
Publication Date01 January 2015
Normative References(Required to achieve compliance to this standard)No other standards are normatively referenced
Informative References(Provided for Information)No other standards are informatively referenced
Descriptors Thermoplastic Pavement Markings Snow plow
ICS93.080.20
PublisherASTM
FormatA4
DeliveryYes
Pages7
File Size97 KB
Price£40.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version