ASTM G114 - 14 - Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service

ASTM G114 - 14

Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service

Status : Current   Published : January 2014

Format
PDF

Format
HARDCOPY



1.1 These practices describe procedures that are used to determine the age resistance of plastic, thermosetting, elastomeric, and polymer matrix composite materials exposed to oxygen-containing media.

1.2 While these practices focus on evaluating the age resistance of polymeric materials in oxygen-containing media prior to ignition and combustion testing, they also have relevance for evaluating the age resistance of metals, and nonmetallic oils and greases.

1.3 These practices address both established procedures that have a foundation of experience and new procedures that have yet to be validated. The latter are included to promote research and later elaboration in this practice as methods of the former type.

1.4 The results of these practices may not give exact correlation with service performance since service conditions vary widely and may involve multiple factors such as those listed in subsection 5.8.

1.5 Three procedures are described for evaluating the age resistance of polymeric materials depending on application and information sought.

1.5.1  Procedure A: Natural Aging—This procedure is used to simulate the effect(s) of one or more service stressors on a material’s oxygen resistance, and is suitable for evaluating materials that experience continuous or intermittent exposure to elevated temperature during service.

1.5.2  Procedure B: Accelerated Aging Comparative Oxygen Resistance—This procedure is suitable for evaluating materials that are used in ambient temperature service, or at a temperature that is otherwise lower than the aging temperature, and is useful for developing oxygen compatibility rankings on a laboratory comparison basis.

1.5.3  Procedure C: Accelerated Aging Lifetime Prediction—This procedure is used to determine the relationship between aging temperature and a fixed level of property change, thereby allowing predictions to be made about the effect of prolonged service on oxidative degradation.

1.6 The values stated in SI units are to be regarded as the standard, however, all numerical values shall also be cited in the systems in which they were actually measured.

1.7  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 10.




Standard NumberASTM G114 - 14
TitleStandard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
StatusCurrent
Publication Date10 January 2014
Normative References(Required to achieve compliance to this standard)No other standards are normatively referenced
Informative References(Provided for Information)No other standards are informatively referenced
Descriptors Aging, Accelerated aging, Combustion, Enriched air, Flammability, Ignition, Lifetime prediction, Natural aging, Oxidative degradation, Oxygen, Oxygen compatibility
ICS13.220.40
PublisherASTM
FormatA4
DeliveryYes
Pages11
File Size173 KB
Price£45.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


Collaborate, Innovate, Accelerate.