BS EN 62282-3-201:2017 - Fuel cell technologies. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems

BS EN 62282-3-201:2017

Fuel cell technologies. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems

Status : Current, Under review   Published : January 2018

Format
PDF

Format
HARDCOPY



IEC 62282-3-201:2017 provides test methods for the electrical, thermal and environmental performance of small stationary fuel cell power systems that meet the following criteria:


- rated electric power output of less than 10 kW;


- grid-connected/independent operation or stand-alone operation with single-phase AC output or 3-phase AC output not exceeding 1 000 V, or DC output not exceeding 1 500 V;


- maximum allowable working pressure of less than 0,1 MPa (gauge) for the fuel and oxidant passages;


- gaseous fuel (natural gas, liquefied petroleum gas, propane, butane, hydrogen, etc.) or liquid fuel (kerosene, methanol, etc.);


- air as oxidant.


This document describes type tests and their test methods only. This document covers fuel cell power systems whose primary purpose is the production of electric power.


This new edition includes the following significant technical changes with respect to the previous edition: revision of test set-up, revision of measurement instruments, introduction of ramp-up test, introduction of rated operation cycle efficiency, introduction of electromagnetic compatibility (EMC) test, revision of exhaust gas test, introduction of typical durations of operation cycles.




Standard NumberBS EN 62282-3-201:2017
TitleFuel cell technologies. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
StatusCurrent, Under review
Publication Date04 January 2018
Normative References(Required to achieve compliance to this standard)EN 61000-6-2:2005, CISPR 11:2015, IEC 61000-4-8:2009, EN 62282-3-200:2016, IEC 62282-3-200:2015, IEC 61000-4-11:2004/ISH1:2010, IEC 61000-6-1:2005, ISO 6060:1989, IEC 61000-4-5:2014, IEC 61000-3-2:2014, IEC 61000-4-4:2012, IEC 61000-4-3:2006/ISH1:2008, IEC 61000-4-6:2013, IEC 61000-4-2:2008, EN 61000-4-4, EN 55011
Informative References(Provided for Information)IEC 61672-1:2013, ISO 11541:1997, ISO 9000:2015, ISO 7941:1988, ASTM F2602 - 13, IEC TS 62282-1:2013, ISO 6798:1995, IEC 60050-601:1985, ISO 11042-2:1996, ISO 11042-1:1996, EN ISO 10523, SAE ARP1533A:2004, ISO 80000, EN ISO 9000, EN 61000-4-6, ISO 6326, EN ISO 6326, EN ISO 6976, EN ISO 80000, ISO 6975, EN 61672-1, EN ISO 6060, ISO 6974, EN 61000-4-8, EN ISO 6974, EN ISO 11541, EN 61000-4-5, EN 61672-2, EN 61000-4-11, EN 27941, EN ISO 6975, ISO 10396:2007, ISO 7934:1989, ASTM D4809 - 09, ISO/TR 15916:2015, ISO 11564:1998, ISO 7935:1992, ISO 6976:2016, IEC 61672-2:2013, ISO 10523:2008, ISO 5815-2:2003 (R08) Ed 1, ISO 10849:1996
ReplacesBS EN 62282-3-201:2013
International RelationshipsEN 61158-6-20:2008,EN 62282-3-201:2017,IEC 62282-3-201:2017
Draft Superseded By16/30314766 DC
DescriptorsPerformance, Test methods, Fuel cells, Electric generators, Electric power systems, Heat
ICS27.070
Title in FrenchTechnologies des piles à combustible Systèmes à piles à combustible stationnaires. Méthodes d'essai des performances pour petits systèmes à piles à combustible
Title in GermanBrennstoffzellentechnologien Brennstoffzellen-Energiesysteme. Leistungskennwerteprüfverfahren für kleine Brennstoffzellen-Energiesysteme
CommitteeGEL/105
ISBN978 0 580 88371 2
PublisherBSI
FormatA4
DeliveryYes
Pages82
File Size1.715 MB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards