BS EN 12831-3:2017 - Energy performance of buildings. Method for calculation of the design heat load. Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3

BS EN 12831-3:2017

Energy performance of buildings. Method for calculation of the design heat load. Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3

Status : Current   Published : July 2017

Format
PDF

Format
HARDCOPY



This European Standard describes a method to calculate the power and the storage volume required for the dimensioning of domestic hot water systems (DHW). The applicability ranges from direct water heaters (no storage volume and a comparatively large effective heating power) to larger storage systems with a comparatively small heating power and large storage volumes. This European Standard is applicable to the following water storage systems: - storage systems characterized by a minimal mixing zone, (such as stratified charging storage tanks or storage tanks with external heat exchangers): these systems are nominated in this standard as "charging storage systems"; - storage tank water heaters and warm water storage tanks with a pronounced mixing zone (such as DHW storage tanks with internal heat exchangers), nominated in this standard as "mixed storage systems"; and for different uses. The Scope also includes standardization methods for determining the energy need for domestic hot water. This European Standard covers the domestic hot water needs in buildings. The calculation of the energy needs for DHW-Systems applies to residential and non-residential buildings, a building or a zone of a building. Figure 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1. NOTE 1 In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1. Table 1 shows the relative position of this standard within the EPB package of standards. (...)




Standard NumberBS EN 12831-3:2017
TitleEnergy performance of buildings. Method for calculation of the design heat load. Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3
StatusCurrent
Publication Date19 July 2017
Normative References(Required to achieve compliance to this standard)EN 12897:2016, EN 50440:2015, ISO 52000-1:2017, EN ISO 52000-1:2017
Informative References(Provided for Information)EN 15316-4-3, CEN ISO/TR 52000-2, EN 15316-3:2017, EN 15378-1:2017, EN 13203-2:2015, EN 806-3:2006, EN 15316-4-8:2017, EN 15316-4-10:2017, EN 15316-1:2017, EN 15316-4-4:2017, EN 12831-1:2017, EN 15316-4-5:2017, EN 15316-4-3:2017, ISO/TR 52000-2:2017, EN 15316-4-1:2017, EN 15316-2:2017, CEN/TR 12831-4:2017, EN 15459-1:2017, EN 15378-3:2017, EN 15316-5:2017, EN 15316-4-2:2017
ReplacesBS EN 15316-3-1:2007
International RelationshipsEN 12831-3:2017
Draft Superseded By14/30311710 DC
DescriptorsEnergy consumption, Thermal output, Heat transfer, Efficiency, Hot-water supply systems, Buildings, Heat loss, Space-heating systems, Heating equipment, Mathematical calculations, Domestic, Heat, Thermal environment systems, Volume, Water
ICS91.140.10
91.140.65
Title in FrenchPerformance énergétique des bâtiments. Méthode de calcul des déperditions calorifiques de base Charge thermique des systèmes de production d’eau chaude sanitaire et caractérisation des besoins, Module M8-2, M8-3
Title in GermanEnergetische Bewertung von Gebäuden. Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen Dimensionierung von Trinkwassererwärmungsanlagen und Bedarfsbestimmung, Modul M8-2, M8-3
CommitteeRHE/24
ISBN978 0 580 87775 9
PublisherBSI
FormatA4
DeliveryYes
Pages62
File Size1.494 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought

  • BS EN 12831-1:2017
    Energy performance of buildings. Method for calculation of the design heat load Space heating load, Module M3-3