BS EN ISO 6185-4:2011 - Inflatable boats. Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater

BS EN ISO 6185-4:2011

Inflatable boats. Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater

Status : Superseded, Withdrawn   Published : July 2011 Replaced By : BS EN ISO 6185-4:2018

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001


This part of ISO 6185 specifies the minimum safety characteristics required for the design, materials, manufacture and testing of rigid inflatable boats (RIBs) with a hull length of between 8 m and 24 m and with a motor power rating of 15 kW and greater.

This part of ISO 6185 is applicable to Type IX and Type X RIBs intended for use within the operating temperatures of −20 °C to +60 °C.

  • Type IX: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides, suitable for navigation in inshore and sheltered waters, up to and including wind force 6 Beaufort and significant wave heights up to 2 m (design categories C and D), with a hull length of between 8 m and 24 m and with a motor power rating of 15 kW and greater.

  • Type X: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides, suitable for navigation in waters, up to wind force 8 Beaufort and significant wave heights up to 4 m (design category B), with a hull length of between 8 m and 24 m and with a motor power rating of 75 kW and greater.

NOTE 1

General arrangements of typical boats of Types IX and X are given in Annexes A and B, respectively.

NOTE 2

For boats with power ratings of 4,5 kW and less, refer to ISO 6185‑1. For boats with power ratings of 4,5 kW to 15 kW inclusive, refer to ISO 6185‑2. For boats with a hull length of less than 8 m and power rating of 15 kW and greater, refer to ISO 6185‑3.

Boats outside these types or outside of Type IX and Type X, as defined, are outside of the scope of ISO 6185.

NOTE 3

For inflatable boats with a hull length greater than 8 m, it is suggested to use the requirements of ISO 6185‑3.




Standard NumberBS EN ISO 6185-4:2011
TitleInflatable boats. Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
StatusSuperseded, Withdrawn
Publication Date31 July 2011
Withdrawn Date17 October 2018
Normative References(Required to achieve compliance to this standard)ISO 12215-6, ISO 12216, ISO 14946:2001, ISO 12215-3:2002, ISO 7010:2011, ISO 12215-5, ISO 11105, ISO 10239, ISO 13297,

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world