BS EN 13598-2:2016 - Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for manholes and inspection chambers

BS EN 13598-2:2016

Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for manholes and inspection chambers

Status : Current, Under review   Published : January 2017

Format
PDF

Format
HARDCOPY



This European Standard specifies the definitions and requirements for buried manholes and inspection chambers installed in non-pressure drainage and sewerage systems to a maximum depth of 6 m from ground level to the invert of the main chamber and manufactured from unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifier (PP-MD) or polyethylene (PE). These products are intended for use in pedestrian or vehicular traffic areas and underground installations conforming to the general requirements given in EN 476 and are used outside the building structure (application area code "U"). They are therefore marked accordingly with a "U". Such products are also deemed to meet the requirements of EN 13598-1 for application area U without the need for further testing. These manholes and inspection chambers may also be used for storm-water systems. This European Standard is only applicable to those chamber / manhole components (base, riser, cone telescopic part and other near surface components) where the manufacturer has clearly stated in the documentation how the components shall be assembled to create a complete manhole or inspection chamber. This European standard only covers manholes and chambers with flow profile bases with or without sloping channels. It also covers the jointing of the component to the pipework system. The frame cover and grating components shall, unless otherwise specified, comply with EN 124-1, EN 124-2, EN 124-3, EN 124-4, EN 124-5 and EN 124-6 [1] or EN 1253-4[2]. - The products covered by this European standard comprise the following:manholes constructed on a drain or sewer to permit entry by personnel. - inspection chambers providing access to the drainage or sewerage system by means of inspection and cleaning equipment. NOTE 1 Shallow inspection chambers for use in non-roadway situations down to a depth of 1,25 m max are specified in EN 13598-1. The manhole and inspection chamber components can be manufactured by various methods e.g. injection moulding, rotational moulding, low-pressure moulding or fabricated from components made in accordance with other standards. NOTE 2 Both manholes and inspection chambers can be site assembled from different components, but can also be manufactured as a single unit.




Standard NumberBS EN 13598-2:2016
TitlePlastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for manholes and inspection chambers
StatusCurrent, Under review
Publication Date31 January 2017
Normative References(Required to achieve compliance to this standard)EN ISO 11357-6, ISO 11357-6, EN ISO 13229, EN 681-3, EN ISO 1183-1, EN ISO 1183-2, EN 13476-2:2018, BS EN 13476-2:2018, BS EN 13476-3:2018, BS EN 13476-1:2018, EN 681-1, EN 13476-1:2018, EN 13476-3:2018, EN 1852-1:2018, EN 13598-1:2010, EN 13101:2002, ISO 13268, EN ISO 580:2005, ISO 13229, EN 14758-1, ISO 13263, ISO 9967, ISO 1043-1, ISO 13259, ISO 13266, EN 1401-1, ISO 1183-2, EN ISO 3126, EN ISO 9967, ISO 3126, ISO 580:2005, EN ISO 1043-1, EN 681-2, EN ISO 1133-1:2011, ISO 3127, EN 12666-1, EN 476, ISO 1183-1, EN 681-4, ISO 1133-1:2011, EN 14396, ISO 13267
Informative References(Provided for Information)EN 1253-4:2016, EN 124-5, EN ISO 15493, EN ISO 15494, ISO 15494, EN 124-6, EN 124-3, ISO 15493, EN 124-1, EN 124-4, EN 124-2
ReplacesBS EN 13598-2:2009
International RelationshipsEN 13598-2:2016
Draft Superseded By14/30310792 DC
DescriptorsPlastics, Drainage, Unplasticized polyvinyl chloride, Manholes, Polyethylene, Performance testing, Performance, Drainpipes, Underground, Dimensions, Polypropylene, Physical properties of materials, Sewers, Marking, Sewage engineering, Mechanical behaviour of materials, Sewerage, Pipework systems, Water supply and waste systems (building, Pipes
ICS93.030
Title in FrenchSystèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression. Poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE). Spécifications relatives aux regards et aux boîtes d'inspection et de branchement
Title in GermanKunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen. Weichmacherfreies Polyvinylchlorid (PVC-U), Polypropylen (PP) und Polyethylen (PE). Anforderungen an Einsteigschächte und Kontrollschächte
CommitteePRI/88/1
ISBN978 0 580 87586 1
PublisherBSI
FormatA4
DeliveryYes
Pages30
File Size3.959 MB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version