BS EN 15502-1:2012+A1:2015 - Gas-fired heating boilers. General requirements and tests

BS EN 15502-1:2012+A1:2015

Gas-fired heating boilers. General requirements and tests

Status : Current, Work in hand   Published : July 2012

Format
PDF

Format
HARDCOPY



Amendment for the addition of ecodesign requirements (Regulation No 813/2013) and energy labelling requirements (Regulation No 811/2013) This European Standard specifies the common requirements and test methods concerning, in particular the construction, safety, fitness for purpose, and rational use of energy, as well as the classification, marking and energy labelling of gas-fired central heating boilers that are fitted with atmospheric burners, fan assisted atmospheric burners or fully premixed burners, and are hereafter referred to as “boilers”. This European Standard is to be used in conjunction with the specific Parts 2 (Part 2-1 and following ones). This European Standard applies to boilers of types B and C, according to CEN/TR 1749:2014: a) that use one or more combustible gases of the three gas families at the pressures stated in EN 437; b) where the temperature of the heat transfer fluid does not exceed 105 °C during normal operation; c) where the maximum operating pressure in the water circuit does not exceed 6 bar; d) which can give rise to condensation under certain circumstances; e) which are declared in the installation instructions to be either a “ condensing” boiler or a "low temperature boiler" or a “standard boiler”. If no declaration is given the boiler is to be considered a “standard boiler” f) which are intended to be installed inside a building or in a partially protected place; g) which are intended to produce hot water either by the instantaneous or storage principle, the whole being marketed as a single unit. This European Standard applies to boilers designed for sealed water systems or for open water systems. This general standard and the specific standards (see Part 2) provide requirements for boilers with known constructions. For boilers with any alternative constructions, which might not fully be covered by this standard or a specific standard, the risk associated with this alternative construction will need to be assessed. An example of an assessment methodology, based upon risk assessment, is given in Clause 11. This European Standard is not intended to cover appliances intended for connection to gas grids where the quality of the distributed gas is likely to vary to a large extent over the lifetime of the appliance.




Standard NumberBS EN 15502-1:2012+A1:2015
TitleGas-fired heating boilers. General requirements and tests
StatusCurrent, Work in hand
Publication Date31 July 2012
Normative References(Required to achieve compliance to this standard)EN 1057:2006+A1:2010, EN 13203-1:2006, EN 1092-2:1997, EN 10226-1:2004, EN 10029:2010, EN 14459:2007, EN 1092-4:2002, EN 437:2003+A1:2009, EN 15036-1:2006, EN 1092-1:2007, ISO 228-1:2000, EN 10226-2:2005, EN 12067-2:2004, EN 88-1:2011, EN 161:2011, EN 298:2012, EN 13203-2:2015, EN 1092-3:2003, ISO 857-1:1998, EN 126:2012, EN 60529:1991, EN 13611:2007+A2:2011, EN 125:2010, ISO 4063:2009, EN 60730-2-9:2010, IEC 60730-2-9:2008, IEC 60529:1989, IEC 60335-2-102:2004, EN ISO 3166-1:2006, EN 60335-2-102:2006, EN 60335-1:2002, EN ISO 228-1:2003, EN 50090, prEN ISO 2553:2011, ISO/DIS 2553:2011, ISO 857-2:2005, EN ISO 4063:2010, ISO 3166-1:2006, IEC 60335-1:2001
Informative References(Provided for Information)EN 60730-1:2011, EN 15456:2008, EN 13836:2006, CEN/TR 1749:2014, 2009/142/EC, 92/42/EEC
ReplacesBS EN 625:1996, BS EN 677:1998, BS EN 483:1999+A4:2007, BS EN 15417:2006, BS EN 15420:2010, BS EN 297:1994
International RelationshipsEN 15502-1:2012+A1:2015
Amended ByAmendment, July 2015; Corrigendum, February 2015
Draft Superseded By14/30310329 DC
DescriptorsTest equipment, Instructions for use, Marking, Installation, Domestic safety, Control devices, Gas space heating, Domestic, Central heating, Performance, Fire safety, Testing conditions, Combustion products, Classification systems, Mathematical calculations, Pressure testing, Temperature, Stability, Design, Boilers, Water heaters, Thermal testing, Hot-water boilers, Leak tests, Flues, Electrical safety, Gas-powered devices, Flames, Automatic control systems, Maintenance, Combustion, Temperature rise, Hot-water supply systems, Performance testing, Valves, Ignition systems (heat engineering)
ICS27.060.30
91.140.10
Title in FrenchChaudières de chauffage central utilisant les combustibles gazeux. Exigences générales et essais
Title in GermanHeizkessel fur gasförmige Brennstoffe. Allgemeine Anforderungen und Prüfungen
CommitteeGSE/29
ISBN978 0 580 87500 7
PublisherBSI
FormatA4
DeliveryYes
Pages192
File Size4.439 MB
Price£342.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version