BS EN 1870-17:2012+A1:2015 - Safety of woodworking machines. Circular sawing machines. Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)

BS EN 1870-17:2012+A1:2015

Safety of woodworking machines. Circular sawing machines. Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)

Status : Current   Published : October 2012

Format
PDF

Format
HARDCOPY



This European Standard specifies all significant hazards, hazardous situation and events as listed in Clause 4, relevant to stationary and displaceable manual horizontal cutting cross-cut circular sawing machines with one saw unit (manual radial arm saws), hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials if they are covered with plastic edging and/or plastic laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.

NOTE 1

For the definition of stationary and displaceable machine, see 3.2.3 and 3.2.4.

The requirements of this document apply to all machines whatever their method of control e.g. electromechanical and/or electronic.

This document does not apply to:

  1. machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand; the bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down;

    NOTE 2

    Transportable motor-operated electrical tools are dealt with in EN 61029‑1:2009 together with IEC 61029‑2‑2:1993.

  2. machines fitted with hydraulically powered machine actuators;

  3. machines fitted with powered work-piece positioning;

  4. machines fitted with the facility for either ripping, milling (including trenching and grooving), sanding and/or drilling;

  5. machines equipped with more than one saw spindle speed;

    NOTE 3

    A standard to cover machines that can be used for ripping and moulding will be considered at the next revision.

    NOTE 4

    Semi-automatic and automatic horizontal cutting cross-cut circular sawing machines with one saw unit (radial arm saws) are dealt with in EN 1870‑11:2003+A1:2009.

  6. machines with integrated feed.

    This document is not applicable to manual horizontal cutting cross-cut circular sawing machines with one saw unit (manual radial arm saws) which are manufactured before the date of its publication as EN.




Standard NumberBS EN 1870-17:2012+A1:2015
TitleSafety of woodworking machines. Circular sawing machines. Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
StatusCurrent
Publication Date31 October 2012
Normative References(Required to achieve compliance to this standard)EN 614-1:2006+A1:2009, EN 614-2:2000+A1:2008, EN 847-1:2005+A1:2007, EN 894-1:1997+A1:2008, EN 894-2:1997+A1:2008, EN 894-3:2000+A1:2008, EN 1005-1:2001+A1:2008, EN 1005-2:2003+A1:2008, EN 1005-3:2002+A1:2008, EN 1005-4:2005+A1:2008, EN 1037:1995+A1:2008, EN 1088:1995+A2:2008, EN 50370-1:2005, EN 50370-2:2003, EN 60204-1:2006, IEC 60204-1:2005, EN 60439-1:1999, IEC 60439-1:1999, EN 60529:1991, IEC 60529:1989, EN 60825-1:2007, IEC 60825-1:2007, EN 61310-1:2008, IEC 61310-1:2007, EN 61800-5-2:2007, IEC 61800-5-2:2007, EN ISO 3743-1:2010, ISO 3743-1:2010, EN ISO 3743-2:2009, ISO 3743-2:1994, EN ISO 3744:2010, ISO 3744:2010, EN ISO 3745:2009, ISO 3745:2003, EN ISO 3746:2010, ISO 3746:2010, EN ISO 4414:2010, ISO 4414:2010, EN ISO 4871:2009, ISO 4871:1996, EN ISO 9614-1:2009, ISO 9614-1:1993, EN ISO 11202:2010, ISO 11202:2010, EN ISO 11204:2010, ISO 11204:2010, EN ISO 11688-1:2009, ISO/TR 11688-1:1995, EN ISO 12100:2010, ISO 12100:2010, EN ISO 13849-1:2008, ISO 13849-1:2006, EN ISO 13857:2008, ISO 13857:2008, ISO 7960:1995, HD 22.4 S4:2004
Informative References(Provided for Information)EN 953:1997+A1:2009, EN 1093-9+A1:2008, EN 1093-11:2001+A1:2008, EN 1870-11:2003+A1:2009, EN 12779:2004+A1:2009, EN ISO 13849-2:2008, ISO 13849-2:2003, EN 60745-1:2009, IEC 60745-1:2006, EN 60745-2-2:2010, IEC 60745-2-2:2003, IEC 60745-2-2:2003/A1:2008, EN 60947-4-1:2001, IEC 60947-4-1:2000, EN 60947-5-1:2004, IEC 60947-5-1:2003, EN 61029-1:2009, IEC 61029-1:1990, EN ISO 11688-2:2000, ISO TR 11688-2:1998, IEC 61029-2-2:1993, 2006/42/EC
ReplacesBS EN 1870-17:2007+A2:2009
International RelationshipsEN 1870-17:2012
Amended ByAmendment, May 2015. Amends and replaces BS EN 1870-17:2012.
Draft Superseded By10/30232431 DC
DescriptorsWoodworking machines, Circular saws (machines), Sawing machines, Machine tools, Equipment safety, Safety measures, Occupational safety, Hazards, Manually-operated devices, Cross-cut saws, Radial, Verification
ICS79.120.10
Title in FrenchSécurité des machines pour le travail du bois. Machines à scies circulaires. Tronçonneuses manuelles à coupe horizontale avec une unité de sciage (scies circulaires radiales manuelles)
Title in GermanSicherheit von Holzbearbeitungsmaschinen. Kreissägemaschinen. Handbetätigte waagrecht schneidende Auslegerkreissägemaschinen mit einem Sägeaggregat (handbetätigte Radialsägen)
CommitteeMTE/23
ISBN978 0 580 87139 9
PublisherBSI
FormatA4
DeliveryYes
Pages52
File Size1.422 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards