BS EN 13020:2015 - Road surface treatment machines. Safety requirements

BS EN 13020:2015

Road surface treatment machines. Safety requirements

Status : Current, Under review   Published : November 2015
Conformity to regulation : Designated



This European Standard applies to road surface treatment machines, which are in particular:

  • binder sprayers [or sprayers];

  • chipping spreaders [or spreaders];

  • machines for surface repairs (binder sprayer chipping spreader [or sprayer spreader]);

  • mastics asphalt mixers;

  • joint sealer;

  • micro-surfacing machines/slurry machines;

  • cold asphalt laying / micro-asphalt-paving machines

(see also Clause 3).

Road surface treatment machines can be mounted on a carrier vehicle, trailer or articulated truck, combining to form an integral unit. It is also possible to mount a road surface treatment machine on its own chassis construction and propulsion system (self-propelled or pedestrian-controlled). In all cases the machine and chassis form an integral unit.

Directives and standards for the vehicular truck chassis aspects, termed 'carrier vehicle' in this document, would be those relative to that equipment, even where specific modifications have been made to realize the road surface treatment application. The use in public road traffic is governed by the national regulations.

This European Standard deals with all significant hazards identified through a risk assessment relevant to road surface treatment machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This European Standard does not deal with significant hazards associated with pressurized tanks, and EMC. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated with machine operation, setting and adjustments, load discharge and routine maintenance.

This European Standard does not include requirements for the carrier vehicles or special constructions. These are covered in directives related to the construction of vehicles. Demountable bodywork systems (e.g. demountable containers) are specified in other standards. Vibrations are not dealt with in the standard, because for all machines of this family vibration is not a relevant hazard due to the low working speed and special working conditions (e.g. flat surface).

This European Standard does not deal with the risks associated with the operation of the machines in potentially explosive atmospheres.

This European Standard does not include requirements of the 94/55/EC Directive related to transport of dangerous goods by road but contains additional specifications in link with these existing requirements.

This European Standard applies to machines which are manufactured after the date of approval of this standard by CEN.

Standard NumberBS EN 13020:2015
TitleRoad surface treatment machines. Safety requirements
StatusCurrent, Under review
Publication Date30 November 2015
Conformity to regulationDesignated
Normative References(Required to achieve compliance to this standard)EN 12999:2011+A1:2012, ISO 4871:1996, EN 500-1:2006+A1:2009, EN ISO 4413:2010, ISO 12100:2010, ISO 3744:2010, EN ISO 3744:2010, EN ISO 2860:2008, ISO 13857:2008, ISO 3457:2003, ISO 13732-1:2006, ISO 11201:2010, EN ISO 2867:2011, EN ISO 12100:2010, EN ISO 13857:2008, EN ISO 4871:2009, ISO 14119:2013, EN ISO 11201:2010, EN ISO 13732-1:2008, ISO 4413:2010, ISO 6750:2005, ISO 2867:2011, EN ISO 14119:2013, EN ISO 3457:2008, ISO 2860:1992
Informative References(Provided for Information)ISO 3795:1989, EN 894-1:1997+A1:2008, EN 894-2:1997+A1:2008, ISO 11546-1:1995, ISO 11820:1996, EN 894-3:2000+A1:2008, ISO 14163, EN 349:1993+A1:2008, ISO 3731:2003, ISO/TR 11688-1:1995, ISO 1185:2003, ISO/TR 11688-2:1998, EN ISO 11688-1:2009, EN ISO 11820:1996, ISO 8759-2:1998, ISO 15667, ISO 12098:2004, EN ISO 15667, EN ISO 11688-2:2000, EN ISO 11546-1:2009, EN ISO 14163, ISO 730:2009, ISO 1724:2003, EN 894-4
ReplacesBS EN 13020:2004+A1:2010
International RelationshipsEN 13020:2015
Draft Superseded By14/30298247 DC
DescriptorsSurface treatment, Asphalts, Hazards, Construction equipment, Mixers, Equipment safety, Safety devices, Maintenance, Roads, Mixing, Spreading, Occupational safety, Road surfacing, Spreaders, Bulk storage containers, Safety measures
Title in FrenchMachines pour le traitement des surfaces routières. Prescriptions de sécurité
Title in GermanMaschinen für die Straßenoberflächenbehandlung. Sicherheitsanforderungen
ISBN978 0 580 86028 7
File Size1.64 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Worldwide Standards
We can source any standard from anywhere in the world

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version

Develop a PAS

Develop a fast-track standardization document in 9-12 months