BS EN 1090-4:2018 Execution of steel structures and aluminium structures. Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications

BS EN 1090-4:2018

Execution of steel structures and aluminium structures. Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications

Status : Current   Published : December 2018

Format
PDF

Format
HARDCOPY



What is this standard about?

This European Standard specifies requirements for the execution, i.e. the manufacture and the installation, of cold-formed structural steel members and sheeting and cold-formed structures for roof, ceiling, floor, wall and cladding applications.

This European Standard applies to structures designed according to the EN 1993 series.

This European Standard applies to structural members and sheeting to be designed according to EN 1993-1-3.

This European Standard may be used for structures designed according to other design rules provided that conditions for execution comply with them and any necessary additional requirements are specified.

This European Standard also specifies requirements for the execution i.e. the manufacture and the installation of structures made from cold formed profiled sheeting for roof, ceiling, floor and wall applications under predominately static loading or seismic loading conditions and their documentation.

This European Standard covers sheeting of structural classes I and II according to EN 1993-1-3 used in structures.

This European Standard covers structural members of all structural classes according to EN 1993-1-3.

Structural sheeting are understood here to be:

— profiled sheet, such as trapezoidal, sinusoidal or liner trays, or

Structural members are understood here to be:

— members (linear profiled cross sections) that are produced by cold forming.

This European Standard also covers:

— not welded built-up sections;

— cold-formed hollow sections including the welding of the longitudinal seam, not covered by EN 10219-1;

— perforated, punctured and micro profiled sheeting and members;

NOTE 1 Welded built-up sections, are not covered, the execution provisions are given in EN 1090–2.

This European Standard also covers spacer constructions between the outer and inner or upper and lower skins for roofs, walls and ceilings made from cold-formed profiled sheeting and the connections and attachments of the afore mentioned elements as long as all are involved in load transfer.

This European Standard covers steel profiled sheeting for composite floors, e.g. during installation and in stage of pouring concrete.

Composite structural members where the interaction between dissimilar materials are an integral part of the structural behaviour such as sandwich panels and composite floors are not covered by this standard.

This European Standard does not cover the necessary analyses and detailing and execution rules for thermal insulation, moisture protection, noise control and fire protection.

This European Standard does not cover regulations of roof cladding and wall cladding, produced by traditional plumber methods or tinsmith methods.

This European Standard does not cover detailed requirements for water tightness or air permeability resistance and thermal aspects of sheeting.




Standard NumberBS EN 1090-4:2018
TitleExecution of steel structures and aluminium structures. Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications
StatusCurrent
Publication Date19 December 2018
Normative References(Required to achieve compliance to this standard)ISO 4042, EN 13523-26, EN 508-1, ISO 11654, ISO 14713, ISO 2081, EN 10204, ISO 12944-4, EN 13523-10, EN ISO 12944-2, EN ISO 14554, EN ISO 3452-1, EN ISO 2081, EN ISO 717-1, EN 62561-1, ISO 9712, EN ISO 12944-4, EN ISO 2409, EN ISO 8492, ISO 2810, EN ISO 9227, ISO 15607, EN 62305-3, EN 10143, EN ISO 9712, EN 10152, ISO 12944-6, ISO 12944-2, ISO 1461, EN ISO 2808, EN ISO 3834, ISO 3452-1, EN ISO 12944-7, ISO 2409, EN ISO 14732, EN ISO 5173, ISO 717-1, EN ISO 6270-1, EN 1995-1-1, ISO 8493, ISO 4136, ISO 17639, ISO 14554, EN ISO 17872:2007, EN 13523-7:2014, EN 1090-2:2008+A1:2011, EN 10162:2003, EN 1993-1-4:2006, EN 1993-1-3:2006, ISO 17872:2007, EN 10169:2010+A1:2012, EN 508-3, EN 1090-1, EN ISO 17639, IEC 62561-1, EN ISO 12944-6, IEC 62305-3, ISO 14731, EN ISO 2810, ISO 8492, ISO 9227, ISO 2808, EN 1993-1-1:2005, EN ISO 15607, EN 1991, EN ISO 14713, EN ISO 11654, ISO 6507, ISO 3834, EN 13523-19, EN ISO 1461, ISO 14732, EN ISO 8493, EN 13523-6, EN ISO 4136, EN 13523-1, EN ISO 4042, ISO 5173, EN 13523-21, EN ISO 14731, ISO 12944-7, EN 10346, EN ISO 6507, ISO 6270-1, EN 13523-8
Informative References(Provided for Information)ISO 3506-4, EN 1991-1-2, EN ISO 12944-1, EN ISO 354, EN ISO 4063, ISO 354, ASTM A380, EN 1991-1-6, EN 1990, EN 14783, EN 1090-5, ISO 3506-3, EN 1991-1-7, EN 14782, ISO 3506-1, EN ISO 3506-1, EN 1998-1, EN ISO 15613, EN ISO 3506-4, ASTM D5796, ISO 4063, EN 1991-1-5, ISO 15613, EN ISO 3506-3, EN ISO 10140, EN 12056, EN ISO 3506-2, EN 1993-1-5, ISO 10140, ISO 12944-1, ISO 3506-2
International RelationshipsEN 1090-4:2018
Draft Superseded By14/30297831 DC
DescriptorsStructural members, Quality control, Performance, Production, Aluminium, Mathematical calculations, Strips, Type testing, Conformity, Inspection, Sheet materials, Structural systems, Structural design, Structures, Strength of materials, Structural steels, Steels, Cold-working, Composite construction
ICS91.010.30
91.080.13
91.080.17
Title in FrenchExécution des structures en acier et des structures en aluminium Exigences techniques pour éléments et structures en acier formés à froid pour applications en toiture, plafond, paroi verticale et plancher
Title in GermanAusführung von Stahltragwerken und Aluminiumtragwerken Technische Anforderungen an tragende, kaltgeformte Bauelemente aus Stahl und tragende, kaltgeformte Bauteile für Dach-, Decken-, Boden- und Wandanwendungen
CommitteeCB/203
ISBN978 0 580 85952 6
PublisherBSI
FormatA4
DeliveryYes
Pages100
File Size2.26 MB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.


Customers who bought this product also bought

  • BS EN 1090-2:2018
    Execution of steel structures and aluminium structures Technical requirements for steel structures