BS EN 12013:2018 - Plastics and rubber machines. Internal mixers. Safety requirements

BS EN 12013:2018

Plastics and rubber machines. Internal mixers. Safety requirements

Status : Current   Published : February 2018

Format
PDF

Format
HARDCOPY



This European Standard deals with all significant hazards, hazardous situations or hazardous events relevant to the design and construction of internal mixers during all phases of the machine life cycle (see EN ISO 12100:2010, 5.4), irrespective of their size and of the control modes of the feeding door and discharge door, for production and laboratory applications, when the machines are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). An internal mixer for production and a tandem mixer with manual feeding begins at the feeding door and ends at the lower edge of the material discharge opening. An internal mixer for production and a tandem mixer with automatic feeding begins at the conveyor, which is an integral part of the machine, and ends at the lower edge of the material discharge opening. A laboratory internal mixer begins at the feeding door and ends at the material container, which is an integral part of the mixer. With regard to noise emission measurement and declaration, only laboratory mixers are covered. Explosion hazards are not dealt with in this document. NOTE Internal mixers usually do not produce explosive atmospheres. Where materials are processed, which may cause an explosive atmosphere, the Directive 2014/34/EU on the Equipment and protective systems intended for use in potentially explosive atmospheres (ATEX) can be applied. Exhaust systems are not covered. This European Standard is not applicable to internal mixers manufactured before the date of its publication.




Standard NumberBS EN 12013:2018
TitlePlastics and rubber machines. Internal mixers. Safety requirements
StatusCurrent
Publication Date09 February 2018
Normative References(Required to achieve compliance to this standard)ISO 14119:2013, ISO 13855:2010, EN ISO 14120:2015, EN ISO 13732-1:2008 (ISO 13732-1:2006)AS, EN 574:1996+A1:2008, EN ISO 14122-1:2016, EN ISO 3746:2010, EN 619:2002+A1:2010, EN ISO 4414:2010, ISO 13857:2008, EN 1037:1995+A1:2008, IEC 61496-1:2012, EN ISO 11201:2010, EN ISO 13855:2010, EN 614-1:2006+A1:2009, EN ISO 13849-1:2015, IEC 60529:1989/A1:1999/A2:2013, EN 61496-2:2013, EN ISO 9614-2:1996, ISO 3746:2010, EN 60204-11:2000, EN ISO 14119:2013, ISO 12100:2010, ISO 11204:2010, EN ISO 14122-3:2016, ISO 14122-2:2016, EN ISO 14122-4:2016, ISO 9614-2:1996, EN 61310-1:2008, EN ISO 14122-2:2016, IEC 61310-1:2007, ISO 14122-1:2016, ISO 14122-4:2016, ISO 14120:2015, EN ISO 12100:2010, EN ISO 13850:2015, IEC 60204-1:2005, ISO 13850:2015, ISO 11201:2010, EN ISO 13856-1:2013, PD CLC/TR 60079-32-1:2015, ISO 14122-3:2016, ISO 13849-1:2015, EN 60529:1991, EN ISO 11202:2010, EN ISO 13857:2008, ISO 13732-1:2006, ISO 3744:2010, ISO 13856-1:2013, EN 61496-1:2004, EN ISO 4871:2009
Informative References(Provided for Information)ISO 11200:2014, EN ISO 11200:2014, ISO/TR 11688-2:1998, EN ISO 11688-2:2000
ReplacesBS EN 12013:2000+A1:2008
International RelationshipsEN 12013:2018
Draft Superseded By15/30296744 DC
DescriptorsSafety engineering, Plastics-working machinery, Plastics, Mixers, Hazards, Equipment safety, Rubber, Safety measures, Plastics and rubber technology
ICS83.200
Title in FrenchMachines pour les matières plastiques et le caoutchouc. Mélangeurs internes. Prescritions de sécurité
Title in GermanKunststoff- und Gummimaschinen. Innenmischer. Sicherheitsanforderungen
CommitteeMCE/3/2
ISBN978 0 580 85705 8
PublisherBSI
FormatA4
DeliveryYes
Pages74
File Size2.863 MB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards