BS EN 61757-2-2:2017 - Fibre optic sensors. Temperature measurement. Distributed sensing

BS EN 61757-2-2:2017

Fibre optic sensors. Temperature measurement. Distributed sensing

Status : Current   Published : October 2017



IEC 61757-2-2:2016(E) defines detail specifications for distributed temperature measurement by a fibre optic sensor, also known as fibre optic distributed temperature sensing (DTS). DTS includes the use of Raman scattering, Brillouin scattering and Rayleigh scattering effects. In addition, Raman scattering and Rayleigh scattering based measurements are performed with a single-ended fibre configuration only. Brillouin scattering based measurements are performed with a single-ended fibre or fibre loop configuration. The technique accessible from both sides at same time (e. g. Brillouin optical time domain analysis, BOTDA) is referred to here as a loop configuration. Generic specifications for fibre optic sensors are defined in IEC 61757-1:2012. This part of IEC 61757 specifies the most important DTS performance parameters and defines the procedures for their determination. In addition to the group of performance parameters, a list of additional parameters has been defined to support the definition of the measurement specifications and their associated test procedures. The definitions of these additional parameters are provided for informational purposes and should be included with the sets of performance parameters. A general test setup is defined in which all parameters can be gathered through a set of tests. The specific tests are described within the clause for each measurement parameter. This general test setup is depicted and described in Clause 4 along with a list of general information that should be documented based upon the specific DTS instrument and test setup used to measure these parameters as per IEC 61757-2-2. Annex A provides a blank performance parameter table which should be used to record the performance parameter values for a given DTS instrument and chosen optical test setup configuration. Annex B provides guidelines for optional determination of point defect effects. Keywords: fibre optic distributed temperature sensing (DTS)

This publication is to be read in conjunction with

IEC 61757-1:2012

Standard NumberBS EN 61757-2-2:2017
TitleFibre optic sensors. Temperature measurement. Distributed sensing
Publication Date25 October 2017
Normative References(Required to achieve compliance to this standard)IEC 60050, VIM, EN 61757-1:2012, IEC 61757-1:2012, ISO/IEC Guide 99:2007, IEC/TR 61931:1998
Informative References(Provided for Information)SEAFOM-MSP-01:2010
International RelationshipsEN 61757-2-2:2017,IEC 61757-2-2:2016
Draft Superseded By14/30295711 DC
DescriptorsChemical analysis and testing, Temperature, Position, Force measurement, Electrical components, Acoustic measurement, Electrical measurement, Assessed quality, Optical communication systems, Environmental testing, Quality assurance systems, Velocity measurement, Physical properties of materials, Thermal measurement, Marking, Meteorological measurement, Classification systems, Magnetic field measurement, Electrical testing, Radiation measurement, Fibre optics, Designations, Probes, Testing conditions, Visual inspection (testing), Mechanical testing, Optical fibres, Temperature measurement, Optical measurement, Electronic equipment and components, Detail specification
Title in FrenchCapteurs fibroniques Mesure de la température. Détections réparties
Title in GermanLichtwellenleitersensoren Temperaturmessung. Ortsaufgelöste faseroptische Messung
ISBN978 0 580 85514 6
File Size1.776 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Worldwide Standards
We can source any standard from anywhere in the world

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version

Develop a PAS

Develop a fast-track standardization document in 9-12 months