BS EN 1570-1:2011+A1:2014 - Safety requirements for lifting tables. Lifting tables serving up to two fixed landings

BS EN 1570-1:2011+A1:2014

Safety requirements for lifting tables. Lifting tables serving up to two fixed landings

Status : Current, Work in hand   Published : November 2011

Format
PDF

Format
HARDCOPY



1.1 This European Standard specifies the safety requirements for industrial lifting tables for raising and/or lowering goods and the operator(s):

  • where the lifting table does not pass a fixed landing;

  • serving not more than 2 fixed landings.

1.2 This European Standard deals with all significant hazards pertinent to lifting tables when they are used as intended by the operating instructions and under the conditions foreseen (including foreseeable misuse) with the operating instructions (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce the risks arising from the significant hazards.

1.3 Both power operated and manually operated lifting tables are included whether stationary or mobile.

1.4 This European Standard does not apply to the following equipment:

  • lifting tables, serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s ( EN 1570‑2);

  • lifting tables, serving more than 2 fixed landings of a building for lifting operators, with a vertical travel speed not exceeding 0,15 m/s ( EN 1570‑3);

  • lifting tables carrying operators and installed in full enclosures ( EN 1570‑3);

  • permanently and temporarily installed lifting tables, serving specific levels of a building for lifting operators, with a vertical travel speed exceeding 0,15 m/s ( EN 81‑1 and EN 81‑2);

  • lifting tables with flat or toothed belts lifting systems for the carrying of operators;

  • lifting tables whose vertical travel speed exceeds 0,15 m/s (unless safe by position and non person carrying);

  • power operated lifting platforms for persons with impaired mobility ( EN 81‑41);

  • mobile lifting tables for airport ground support equipment ( EN 1915‑2 and EN 12312‑1);

  • lifting tables which are designed as part of a lift according to Directive ( 95/16/EC);

  • lifting tables used on ships;

  • mobile elevating work platforms ( EN 280);

  • static elevating work platforms;

  • vehicle lifts for maintenance ( EN 1493);

  • mobile lifting tables used for fire fighting ( EN 1777);

  • mobile lifting tables used as fork lift trucks and order pickers;

  • mobile lifting tables with a horizontal travelling speed of more than 1,6 m/s;

  • rail dependent storage and retrieval equipment ( EN 528);

  • theatre stage lifts intended to move performers;

  • scissor lift pallet trucks ( EN ISO 3691‑5);

  • suspended lifting tables;

  • lifting tables operated by pushing chains.

1.5 This standard does not establish the additional requirements for:

  • electromagnetic compatibility;

  • operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields);

  • operation subject to special rules (e.g. potentially explosive atmospheres, mines);

  • handling of loads, the nature of which could lead to dangerous situations (e.g. molten metal, acids, radiating materials, especially brittle loads);

  • hazards occurring during construction, transportation and disposal;

  • equipment installed on the load platform or replacing it;

  • integration into systems or other machines, control from more than two control stations, etc.;

  • cable-less controls;

  • lifting tables where the hydraulic pressure is derived directly from gas pressure;

  • the power supply to the lifting table by internal combustion engine.




Standard NumberBS EN 1570-1:2011+A1:2014
TitleSafety requirements for lifting tables. Lifting tables serving up to two fixed landings
StatusCurrent, Work in hand
Publication Date30 November 2011
Normative References(Required to achieve compliance to this standard)EN ISO 13850:2008, EN 60529, IEC 60204-1:2005, ISO 4308-2, ISO 4308-1, EN 61496-1, EN ISO 4414, ISO 13849-1:2006, ISO 11228-1, EN 60947-5-1, IEC 61496-2:2006, EN 61310-1, CLC/TS 61496-2:2006, ISO 13857:2008, EN ISO 13849-1:2008, ISO 12100:2010, EN ISO 4413, IEC 60947-5-3:1999, ISO 4414:2010, IEC 61310-1:2007, IEC 61496-1:2004, EN ISO 14122-3:2001, ISO 4413:2010, IEC 60947-5-1:2003, ISO 14122-3:2001, IEC 61310-3:2007, EN 61310-2, EN ISO 13857, EN ISO 12100:2010, EN 61310-3, ISO 4301-1, ISO 11228-2, IEC 61310-2:2007, EN 60947-5-3, EN 60204-1:2006, IEC 60529:1989, ISO 606, EN 1088:1995+A2:2008, EN 13241-1:2003+A1:2011, ISO 2408, ISO 13850:2006
Informative References(Provided for Information)EN 1915-2, EN ISO 13732-1, EN 280, CEN Guide 414, EN 1777, EN 1493, ISO 13732-1:2006, 2006/42/EC, EN 81-31, EN 1760-1, EN 349, ISO 3691-5:2009, ISO 3864-3, EN ISO 3691-5, EN 528, EN 81-2, ISO 11161:2007, EN ISO 11161, EN 81-1, EN 81-41
ReplacesBS EN 1570:1998+A2:2009
International RelationshipsEN 1570-1:2011+A1:2014
Amended ByAmendment, October 2014
DescriptorsMaterials handling equipment, Instructions for use, Cut-out devices, Pneumatic transmission systems, Occupational safety, Goods hoists, Safety devices, Stationary, Approval testing, Performance testing, Velocity, Hydraulic transmission systems, Hazards, Control devices, Structural design, Verification, Certificates of conformity, Type testing, Force measurement, Electrical testing, Marking, Mechanical transmission systems, Noise (environmental), Passenger hoists, Equipment safety, Safety measures, Platforms, Position, Overload, Stability, Stress, Mobile, Operators (personnel), Clearance distances, Power transmission systems, Lifting equipment, Mechanical behaviour of materials
ICS53.020.99
Title in FrenchPrescriptions de sécurité des tables élévatrices. Tables élévatrices desservant jusqu'à 2 niveaux définis
Title in GermanSicherheitsanforderungen an Hubtische. Hubtische, die bis zu zwei feste Haltestellen anfahren
CommitteeMHE/12
ISBN978 0 580 85499 6
PublisherBSI
FormatA4
DeliveryYes
Pages70
File Size1.968 MB
Price£260.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards


Customers who bought this product also bought

  • BS EN 1570-2:2016
    Safety requirements for lifting tables Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s