BS EN 60793-2-10:2016 - Optical fibres. Product specifications. Sectional specification for category A1 multimode fibre

BS EN 60793-2-10:2016

Optical fibres. Product specifications. Sectional specification for category A1 multimode fibre

Status : Superseded, Withdrawn   Published : March 2016 Replaced By : BS EN 60793-2-10:2017

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


IEC 60793-2-10:2015 is applicable to optical fibre types A1a, A1b, and A1d. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Type A1a applies to 50/125 ?m graded index fibre. Three bandwidth grades are defined as A1a.1, A1a.2 and A1a.3. Each of these bandwidth grades is defined for two levels of macrobend loss performance that are distinguished by "a" or "b" suffix. Those with suffix "a" are specified to meet traditional macrobend loss performance levels. Those with suffix "b" are specified to meet enhanced macrobend loss (i.e. lower loss) performance levels. Type A1b applies to 62,5/125 ?m graded index fibre and A1d applies to 100/140 ?m graded index fibre. Other applications include, but are not restricted to, the following:


- short reach, high bit-rate systems in telephony, distribution and local networks carrying data, voice and/or video services;


- on-premises intra-building and inter-building fibre installations including data centres, local area networks (LANs), storage area networks (SANs), private branch exchanges (PBXs), video, various multiplexing uses, outside telephone cable plant use, and miscellaneous related uses.


Three types of requirements apply to these fibres:


- general requirements, as defined in IEC 60793-2;


- specific requirements common to the category A1 multimode fibres covered in this standard and which are given in Clause 3;


- particular requirements applicable to individual fibre types or specific applications, which are defined in the normative family specification annexes. This fifth edition cancels and replaces the fourth edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:


- addition of enhanced macrobending multimode fibres A1a.1b, A1a.2b and A1a.3b;


- inclusion of the specified test wavelength and specimen length for core diameter (CD), numerical aperture (NA), differential mode delay (DMD) and threshold values for CD and NA;


- addition of a specimen length for 850 nm bandwidth of A1a and A1b fibres. Keywords: optical fibre types A1a, A1b, and A1d




Standard NumberBS EN 60793-2-10:2016
TitleOptical fibres. Product specifications. Sectional specification for category A1 multimode fibre
StatusSuperseded, Withdrawn
Publication Date31 March 2016
Withdrawn Date07 December 2017
Normative References(Required to achieve compliance to this standard)EN 60793-1-43, EN 60793-1-42, EN 60793-1-49, IEC 60793-1-21, IEC 60793-1-32, EN 60793-1-33:2017, EN IEC 60793-1-47:2018, IEC 60793-1-47:2017, IEC 60793-1-33:2017, IEC 60793-1-34, EN 60793-1-51, EN 60793-2:2012, IEC 60793-1-43, IEC 60793-1-22, IEC 60793-1-52, EN 60793-1-34, IEC 60793-1-20, IEC 60793-1-50, IEC 60793-1-30, EN 60793-1-52, IEC 61280-4-1, IEC 60793-1-31, EN 60793-1-22, EN 60793-1-32, EN 60793-1, EN 60793-1-46, EN 60793-1-50, IEC 60793-1-49, EN 61280-4-1, EN 60793-1-31, EN 60793-1-53, IEC 60793-1-42, IEC/TR 61931, IEC 60793-1-41, IEC 60793-1-46, EN 60793-1-20, IEC 60793-1-51, IEC 60793-1-40, EN 60793-1-30, IEC 60793-2:2011, IEC 60793-1-53, EN 60793-1-40, EN 60793-1-41, EN 60793-1-21, IEC 60793-1
Informative References(Provided for Information)ISO/IEC 9314-9, ISO/IEC 11518-1, ISO/IEC 11801, IEC 60793-1-1, IEC 60794-1-1, EN 61280-1-3, EN 60794-1-1, EN 61280-1-4, ISO/IEC 14165-116, TIA TSB-172, IEC 61280-1-3, ISO/IEC 14165-115, IEC 61280-1-4, IEEE 802.3, ISO/IEC 8802-5, ANSI INCITS 364:2003, EN 60793-1-1, ISO/IEC 9314-3, ISO/IEC/IEEE 8802-3, IEC TR 62048
Replaced ByBS EN 60793-2-10:2017
ReplacesBS EN 60793-2-10:2002, BS EN 60793-2-10:2011
International RelationshipsEN 60793-2-10:2016,IEC 60793-2-10:2015
Draft Superseded By13/30292530 DC
DescriptorsElectronic equipment and components, Mechanical properties of materials, Data transmission, Optical communication systems, Specification (approval), Fibre optics, Telecommunication systems, Communication equipment, Mechanical testing, Dimensional measurement, Data processing, Environmental testing, Optical properties of materials, Optical fibres, Product specification, Fibre optic cables
ICS33.180.10
Title in FrenchFibres optiques. Spécifications de produits. Spécification intermédiaire pour les fibres multimodales de catégorie A1
Title in GermanLichtwellenleiter. Produktspezifikationen. Rahmenspezifikation für Mehrmodenfasern der Kategorie A1
CommitteeGEL/86/1
ISBN978 0 580 84821 6
PublisherBSI
FormatA4
DeliveryYes
Pages50
File Size1.759 MB
Price£240.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version