PD CEN/TR 13801:2014 - Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation

PD CEN/TR 13801:2014

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation

Status : Current   Published : April 2014

Format
PDF

Format
HARDCOPY



This Technical Report gives the recommended practice for installation of thermoplastics piping systems in the field of soil and waste discharge (low and high temperature) inside buildings (marked with "B") and of soil and waste discharge systems for both inside buildings and buried in ground within the building structure (marked with "BD"). This Technical Report provides material dependent installation techniques but it is important that the general installation practice as given in the relevant parts of EN 12056 for B application are taken into account in manufacturer's instructions, subject to any applicable national and/or local regulations. This Technical Report is applicable to thermoplastics pipes and fittings as specified in the associated standards EN 1329 1 [1] (PVC-U), EN 1451 1 [2] (PP), EN 1453 1 [3] (PVC-U with structured-wall pipes), EN 1455 1 [4] (ABS), EN 1519 1 [5] (PE), EN 1565 1 [6] (SAN+PVC) and EN 1566 1 [7] (PVC-C), their joints and to joints with components of other plastics and non-plastics materials intended to be used for the following purposes: a) soil and waste discharge pipework for the conveyance of domestic waste waters (low and high temperature); NOTE 1 See Clause 4 for waste discharge temperature limits. b) ventilating pipework associated with a); c) rainwater pipework within the building structure (see Figure 1, key 16). It is applicable to pipes and fittings, marked with "B", which are intended to be used above ground only, and to pipes and fittings, marked "BD", which are intended to be used above and buried in ground within the building structure. NOTE 2 Only those components as specified in the relevant associated standard with nominal outside diameters equal to or greater than 75 mm (marked with "BD") are intended for use buried in ground within the building structure. The term "within building structure" covers all gravity discharge pipework within a building, including the elements installed below the slab and buried in the ground. If specified in the relevant associated standard, this Technical Report also covers soil and waste discharge pipework fixed externally onto the building (see Figure 1, key 17). It is not applicable to pipework that passes under the building without any connection from the discharge system. NOTE 3 According to the associated standards, for external above ground soil and waste discharge, additional requirements depending on the climate, will be agreed between the manufacturer and the user. According to the associated standards, components conforming to other standards on plastic piping systems may be used with pipes and fittings conforming to a given associated standard, if they conform to the requirements for joint dimensions and functional requirements of the given associated standard.




Standard NumberPD CEN/TR 13801:2014
TitlePlastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
StatusCurrent
Publication Date30 April 2014
Normative References(Required to achieve compliance to this standard)EN 12056-1:2000, EN 12056-2:2000, EN 12056-3:2000, EN 12056-5
Informative References(Provided for Information)EN 1329-1, EN 1451-1, EN 1453-1, EN 1455-1, EN 1519-1, EN 1565-1, EN 1566-1, EN 13476-2, EN 14680, EN 14814, ISO/TR 7620, ISO 8283-2, ISO 8283-4, ISO/TR 10358
ReplacesDD ENV 13801:2001
International RelationshipsCEN/TR 13801:2014
DescriptorsThermoplastic polymers, Plastics, Pipes, Pipework systems, Water supply and waste systems (building), Waste disposal (buildings), Waste disposal, Buildings, Sewers, Drainage, Installation, Pipe fittings, Pipe couplings, Waste-water drainage, Rainwater control systems, Rainwater pipes, Ventilation
ICS83.140.30
91.140.80
Title in FrenchSystèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments. Thermoplastiques. Pratiques recommandées pour la pose
Title in GermanKunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur. Thermoplastische Werkstoffe. Empfehlungen für die Verlegung
CommitteePRI/88/1
ISBN978 0 580 82484 5
PublisherBSI
FormatA4
DeliveryYes
Pages52
File Size1.735 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards